DVDO C3-1 User manual

DVDO-C3-1 Tracking Camera Quick Start Guide DVDO 

DVDOC3_V1.0

1 Appearance and Interface


No. Name No. Name
1 System Select Switch 6 LINE IN Interface
2 Network Interface 7 3G SDI Interface
3 RS232 OUT Interface 8 DC 12V Interface
4 RS232 IN Interface 9 Power Switch
5 HDMI Interface - -
2 Packing List
Name Quantity Name Quantity
Camera 1 Remote Control 1
Power Adapter 1 Power Cable 1
RS232 Cable 1 Wall Bracket 1
Screw Pack 1 Quick Start Guide 1
3 Remote Control

No. Name Function Description
1 Standby Key Press to enter standby mode
2 Number Key Preset setting or transfer preset
3 *Key Used with other keys
4 Preset Key Press with number key (0-9) to store preset
5 HOME Key
Confirm menu or press to return PTZ to
middle position
6 Return Key Return to last level menu
7 Zoom Key Zoom lens wide angle / narrow angle
8 Left/Right
Setting Key
Standard: Simultaneously press
Left/Right setting key + 1 (horizontal)
Reverse: Simultaneously press
Left/Right setting key + 2 (horizontal)
9 Focus Key Auto / Manual / Far / Near focus
10 Selection Key Select the camera to control
11 #Key Used with other keys
12
IR Remote
Control Key [*+＃+F1/F2/F3/F4]: Address 1/2/3/4
13 Reset Key
Delete preset (reset key + corresponding
preset number key)
14 PTZ Control Key Press arrow buttons to pan and tilt.
15 Menu Key Enter or exit OSD menu
16 Backlight Key Turn on/off backlight compensation
17 PTZ reset key Press to self-test PTZ

DVDO-C3-1 Tracking Camera Quick Start Guide DVDO 

DVDOC3_V1.0

4 Safety Precautions
Electrical Safety
The installation and use of this product must strictly comply with local
electrical safety standards.
Power Polarity
This product uses DC +12V power supply, the maximum current 1A.
Please pay attention to the polarity of power supply.
Careful Installation
Do not grab the camera head to move the camera.
Do not rotate head of camera by hand, it may cause mechanical problems.
Do Not Disassemble
This product has no parts which can be repaired by the user. Any damage
caused by the user's own disassembly is not covered by warranty.
Electromagnetic fields at specific frequencies may affect image quality.
Do not hot-plug the power supply during the use of the camera.
5 Troubleshooting
Image
The monitor shows no image
1) Check that the camera power supply is connected, the voltage is normal,
and the power indicator light is always on.
2) Turn off the power switch to check whether the camera is self-testing.
3) Check all connections of video platform and TV / display..
Intermittent image loss
Check all connections of video platform and TV / display.
Image jitter
1) Ensure stable camera installation.
2) Check for vibrations near the camera.
There is no video image in IE Browser
Please visit VLC website (http://www.videolan.org/vlc) to download and
install 32-bit VLC media player.
Unable to access video conference camera through IE Browser
1. Use PC to access network to test whether PC and USB camera can
communicate.
2. Disconnect the network, connect USB video conference camera and PC
separately, and reset the IP address of PC.
3. Check IP address, subnet mask, and gateway settings for USB camera.
4. Check for MAC address conflicts.
5. Check whether the web port is occupied by another device.
Forget IP address or login password
Default presenter camera IP address: 192.168.100.82
Default viewer camera IP address: 192.168.100.92
Default user name: admin
Default password: admin
Control
Remote control unresponsive
1) Check and install new battery for remote control.
2) Check camera for correct working mode.
3) Check remote control address matches camera.
Serial port control unresponsive
1) Check camera protocol and address.
2) Check control line securely connected.
6 Toxic and Harmful Substances
Part Name
Toxic or harmful substances or elements
(Pb) (Hg) (Cd) (CrVI) (PBB) (PBDE)
Metal x ΟΟΟΟΟ
Plastic ΟΟΟΟΟΟ
Glass x ΟΟΟΟΟ
Circuit board x ΟΟΟΟΟ
Power x ΟΟΟΟΟ
Attached x ΟΟΟΟΟ
This form is compiled in accordance with SJ/T 11364.
Ο: Indicates that the content of the hazardous substance in all
homogenized materials of the component is subject to the limit specified
in GB/T 26572.
x: Indicates hazardous substance in at least one of the components
homogenized material content in excess of the GB/T 26572 limit
requirements, and there are no mature alternatives.
7 Warranty Card
If failure is due to non-human causes within one year from date of purchase
of camera, please email [e-mail] with proof of purchase / receipt
and serial number.
Any of the following circumstances is not covered by warranty:
Product has been modified or tampered with.
Use of camera in an environment that does not conform to requirements
of the product.
Uncontrollable factors such as fire, earthquake, lightning strike, etc.
Warranty card does not match product number.