Dynamic 91148X72MMAG User manual

Installation Guide
Item Qty Description Item Qty Description
H1
H2
H3
H4
4Locking
Caster
Hex Bolts
M8x64mm
Hex Bolts
M8x40mm
Washer
End Cap
Self-tapping
Screw
Screwdriver
Wrench
4
12
6
6
2
1
1
H5
H6
H7
H8
- 1 -
1. Screw four locking casters (H1) into two bottom posts by hand.
2. Connect two vertical posts
to two bottom posts by Hex Bolts (H2)
Item Qty
1
1
2

Description
- 2 -
Installation Guide
Item Qty Description Item Qty Description
H1
H2
H3
H4
4Locking
Caster
Hex Bolts
M8x64mm
Hex Bolts
M8x40mm
Washer
End Cap
Self-tapping
Screw
Screwdriver
Wrench
4
12
6
6
2
1
1
H5
H6
H7
H8
3. Connect top horizontal posts to
two vertical posts by Hex Bolts. (H4)
4. Connect bottom horizontal post to
two vertical posts by Hex Bolts. (H4)
Description
3
3
4

DescriptionDescription
- 3 -
6. Then insert the end caps
(H5) into the vertical and
bottom posts
5. Slide the board downward until the board
rests on the vertical post's designated notch.
5
TO FLIP BOARD:
To flip board, rotate knob below the
horizontal bar until it disconnects from
board. Then once the board is flipped
rotate the knob until it connects to board.