Claridge Edify Mobile User manual

Edify™
Mobile Markerboard
PRODUCT OPTIONS &
ASSEMBLY INSTRUCTIONS
PACKAGE CONTENTS
STANDARD COMPONENTS
1 - Board Subassembly
2 - Marker Tray
3 - Leg Assembly (x2)
4 - Support Tube (x2)
OPTIONAL COMPONENTS
5 - Lapboard Bucket
6 - Lower Tray
7 - Lapboard (x4)
HARDWARE
8 - 1/4-20 x2” Hex Screws (x8)
9
- Allen Key
1
2
3
4
5
6
7
89

1. Insert legs into board
assembly and align screw
holes.
2. Place marker tray under the
board assembly and align
with the holes on the tube
frame. Fasten assembly
together with provided
screws by inserting them
from the outside of the tube
screwing into the marker
tray.
3. Align each cross tube with
the holes on the lower legs
and fasten into place with
the provided screws.
4. Remove adhesive tape from
under lip of shelf or bin and
place into location on top of
the two cross tubes
Edify™
Mobile Markerboard
800-434-4610
claridgeproducts.com
MOBILE ASSEMBLY
OPTIONS AND ACCESSORIES
12
3 4
Edify Base Edify with Shelf, Lapboards Edify with Bin, Lapboards