Dynex DX-15L150A11 Use and care manual

Firmwareupdate:Download/InstallinstructionsforTVModels:DX‐15L150A11,
DX‐19L150A11,DX‐22L150A11,DX‐40L150A11

Systemrequirements:acomputerwithanopenUSBport,USB2.0flashdrive(stick),broadband
internetaccessandoperatingsoftwareofWindowsXP,WindowsVista,Windows7orMacOS10.3or
newer.Thisoptionisnotrecommendedwithdial‐uporDSLservicewithabitratelowerthan256kbps.If
theinstructionsprovidedbelowdonothelp,callDynexCustomerSupportat(800)305‐2204for
assistance.
First:Downloadtheupdatefile
1. DeterminetheModelnumberofyourTVlocatedontheback,bottomorsideofTV(seephotos
below)


SideorBottomLabel
BackLabel
2. InsertUSBflashdriveintotheopenUSBportonyourcomputer.
3. Verifythatyouareonthesupporttabofyourproductmodelnumber;thenclickonthe
firmwarelink.
4. Downloadfirmware;ifapop‐upwindowopenstellingyoutoopen,saveorcancel,clickSave
andsavethefiletoyourUSBflashdrive.Note:Fileneedstobesavedontherootdirectory.
a. Note:Filesizeisapproximately3MB.Estimateddownloadtimeis1‐2minutes(witha
1.5Mbpsbroadbandconnection).
5. AftersavingthefirmwaretoyourUSBflashdrive;removetheUSBflashdrivefromyour
computer.
Second:UpgradingtheTVSoftwarewithaUSBFlashDrive(Stick)
1. MakesureyouTV’sACcordissecurelypluggedintoawalloutletandtheunitisturnedoff.This
canbeverifiedbyaredindicatorlightonthefrontoftheTV.
2. InserttheUSBflashdrivecontainingthefirmwarethatwasdownloadedintotheTV’sUSB
serviceportlocatedonthesideoftheTV.Note:Thisportmaybecoveredbyarubberflap,you
mayneedtoflipopentherubberflap(Seephotobelow).


3. TurntheTVonusingtheremotecontrolorpowerbuttononthesideoftheTV.
4. Ascreensimilartotheonebelowwillappear(Note:ifthereisnoupgrademenudisplayed;you
canturnyourTVoff,thenturntheunitbackon):


5. Usingyourremotecontrolarrowkeys,makesurethe“Yes”buttonishighlightedandpress
enter/OKontheremote.Thesoftwareupdatewillthenbegin
Note:DONOTTURNTHEPOWEROFFORUNPLUGDURINGTHEUPDATE
Note:Duringthesoftwareupdate,aprogressbarwillappeardisplayingtheprogressofthe
update;thisupdatetakesapproximatelyone(1)minute.
6. Oncetheupdatehascompleted,ascreensimilartotheoneshownbelowwillappear:



7. RemovetheUSBflashdrive(stick)fromtheTV.
8. PoweroffTV,andthenunplugTVfromwallsocket(keepTVunpluggedfor5‐10seconds).
9. PlugTVbackintowallsocket,wait5to10secondsthenpoweronTV.
10. OncetheTVispowereduptheprocessiscomplete.
Note:Itisrecommendedthatyouerase/deletetheupdatefilefromtheUSBflashdriveusing
yourcomputerpriortousingtheUSBflashdriveagain.
Note:Youwillneedtoreprogramyourfavoritechannelsandanycustomsettingsthatyoumay
havesetup.
Note:Ifyouexperienceanyissueswhileperformingthisupgrade,callDynexCustomerSupport
at(800)305‐2204forassistance.







January2011