Dyon SYNC User manual

Instruction Manual
Please read this manual carefully before operation.
SYNC
7” Twin Screen Portable LCD DVD Player
with USB Port and Card Slot
EN

2
For Customer Use:
Enter below the serial number that is located on the
bottom of the unit. Retain this information for future
reference.
Model No. SYNC
Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF FIRE AND ELEC-
TRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK)
OF THE UNIT. REFER SERVICING ONLY TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operation and servicing instructions in the literature accompanying the
appliance.
WARNING:
To prevent fire or shock hazard, do not expose this device to rain or moisture. Dangerous high voltage is present inside the
enclosure. Do not open the cabinet.
Handling the cords on this product will expose you to lead, a chemical known to the State of California to cause cancer, and
birth defects or other reproductive harm. Wash hands after handling.
CAUTION:
This Digital Video Disc player employs a laser system. To prevent direct exposure to the laser beam, do not try to open the
enclosure or defeat the safety interlocks. When open and the interlocks are defeated, visible laser radiation is present.
To prevent electric shock, match wide blade of plug to wide slot of outlet and fully insert.
Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation
exposure. DO NOT STARE INTO THE BEAM.
NOTICE:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
PRECAUTIONS
For recycling or disposal information about this product, please
contact your local authorities or the Electronics Industries Alliance:
www.eiae.org.
Do not make any changes or modifications to the equipment unless otherwise specified in
the manual. If such changes or modifications should be made, you could be required to stop
operation of the equipment.
EN

3
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions: All the safety and operating instructions should be read before the product
is operated.
Retain Instructions: The safety and operating instructions should be retained for future refer-
ence.
Heed Warnings: All warnings on the product and in the operating instructions should be
adhered to.
Follow Instructions: All operating and usage instructions should be followed.
Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Attachments: Use only attachments recommended by the manufacturer. Use of other attach-
ments may be hazardous.
Water and Moisture: Do not use this product near water (e.g., near a bath tub, washbowl,
kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).
Heat: The product should be situated away from heat sources such as radiators, heat regis-
ters, stoves, or other products (including amplifiers) that produce heat.
Accessories: Do not place this product on an unstable cart, stand, tri-
pod, bracket, or table. Use only with carts, stands, tripods, brackets,
or tables recommended by the manufacturer or sold with the prod-
uct. Any mounting of the product should follow the manufacturer’s
instructions and should use a mounting accessory recommended
by the manufacturer.
A product and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the product
and cart combination to overturn.
Ventilation: Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product and to protect it from overheating. These openings
should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer instructions have been adhered to.
Power Sources: This product should be operated only from the type of power source indi-
cated on the rating label. If you are not sure of the type of power supply to your home, consult
your product dealer or local power company. For products intended to operate from battery
power or other sources, refer to the operating instructions.
Power Sources: Do not connect the power plug to a power outlet other than that which is
indicated here and on the label as this may result in the risk of fire or electric shock. Do not
handle the power plug with wet hands. Doing so may cause electric shock.
Power Lines: An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits, as contact with them might be fatal.
Battery: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type. Battery pack or batteries installed shall not be exposed to excessive heat
such as sunshine, fire or the like.
12V Car Power Adaptor: Disconnect this car power adaptor when not in use. Not for use in
24V vehicles.
Using the unit in a Vehicle : On no account should this unit be used by the driver of a moving
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
EN

4
IMPORTANT SAFETY INSTRUCTIONS
motor vehicle, or left unsecured in the vehicle whilst driving. If this unit is being used by a
passenger in your vehicle, be sure that it is secured or held safely, and does not obstruct any
safety device (i.e. airbag, seat belt etc.) that is fitted. All passengers should wear seat belts
when using this unit in a moving vehicle. If in doubt, please contact your vehicle manufacturer
for further advice. Using other car power adaptors could damage the unit.
Using Headphones or Earphones: Hearing experts advise against the constant use of per-
sonal stereos played at high volume. Constant high volume use can lead to hearing loss.
If you experience ringing in the ears or hearing loss, discontinue use and seek medical
advise.
Grounding or Polarization: This product may be equipped with a polarized alternating-current
line plug that has one blade wider than the other. This plug will only fit into the power outlet in
one direction. This is a safety feature. If you are unable to insert the plug fully into the outlet,
try reversing the direction of the plug. If the plug should still fail to fit, contact an electrician to
replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Power-Cord Protection: Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and at the point which they exit from the product.
Protective Attachment Plug: The product may be equipped with an attachment plug with
overload protection. This is a safety feature. See the operating instructions for replacement
or directions to reset the protective device. If replacement of the plug is required, be sure the
service technician has used a replacement plug that has the same overload protection as the
original plug as specified by the manufacturer.
Outdoor Antenna Grounding: If an outside antenna is connected to the product, be sure the
antenna system is grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70 provides
information with regard to proper grounding of the mast and supporting structure, ground-
ing of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode (see figure).
Lightning: For added protection for this product, unplug it from the wall outlet and disconnect
the antenna or cable system during a lightning storm or when it is left unattended and unused
18.
19.
20.
21.
22.
23.
EN

5
IMPORTANT SAFETY INSTRUCTIONS
for long periods of time. This will prevent damage to the product due to lightning or power-line
surges.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
Overloading: Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
Object and Liquid Entry: Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or shout-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
Servicing: Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions: a) when the power-supply or plug
is damaged; b) if liquid has been spilled or if objects have fallen into the product; c) if the
product has been exposed to rain or water; d) if the product does not operate normally by fol-
lowing the operating instructions. Adjust only those controls that are covered by the operating
instructions as improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to its normal operation;
e) if the product has been dropped or damaged in any way; f) when the product exhibits a
distinct change in performance—this indicates a need for service.
Replacement Parts: When replacement parts are required, be sure that your service techni-
cian has used replacement parts specified by the manufacturer or have the same charac-
teristics as the original part. Unauthorized substitutions may result in fire, electric shock, or
other hazards.
Safety Check: Upon completion of any service or repairs to this product, ask the service tech-
nician to perform safety checks to ensure that the product is in proper operating condition.
Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as recom-
mended by the manufacturer.
24.
25.
26.
27.
28.
29.
30.
31.
EN

6
TABLE OF CONTENTS
PRECAUTIONS ...............................................................................................................................2
IMPORTANT SAFETY INSTRUCTIONS ........................................................................................3
TABLE OF CONTENTS ...................................................................................................................6
PACKAGE CONTENTS...................................................................................................................8
ABOUT OPTICAL DISCS..............................................................................................................9
Disc Requirements.................................................................................................................9
Disc Care and Maintenance ..................................................................................................9
Handling a Disc..............................................................................................................9
Cleaning a Disc..............................................................................................................9
LOCATION OF CONTROLS..........................................................................................................
Front View (Main Unit) ...........................................................................................................
Left View (Main Unit)..............................................................................................................
Right View (Main Unit) ...........................................................................................................
Bottom View (Main Unit) ........................................................................................................
Left View (Monitor).................................................................................................................
Right View (Monitor) ..............................................................................................................
Front View (Monitor) ..............................................................................................................
Remote Control......................................................................................................................
Battery Installation .................................................................................................................
Power Supply .........................................................................................................................
CONNECTIONS ............................................................................................................................
Power, Audio and Video Output Connections .......................................................................
Connecting to a wall outlet ............................................................................................
Outputting AV signal from the main unit to the monitor by the DC car cord .................
Using the car plug..........................................................................................................
Outputting AV signal from the main unit to the monitor.................................................
Audio and Video Connectios ( external device) ....................................................................
USB/SD/MMC Card Connection ...........................................................................................
Connecting to an Amplifier Equipped with a Dolby Pro Logic Surround...............................
Rechargeable Battery Pack...................................................................................................
Using Headphones/Earphones .............................................................................................
BASIC OPERATIONS....................................................................................................................
Basic Playback.......................................................................................................................
Play/Pause/Stop ............................................................................................................
Previous /Next (Skip) .....................................................................................................
Forward/Reverse (Search) ............................................................................................
Slow/Step.......................................................................................................................
Menu Navigation ....................................................................................................................
Numeric Keypad.....................................................................................................................
Disc Error Messages .............................................................................................................
Power Management...............................................................................................................
10
10
11
11
11
12
12
12
13
14
14
15
15
15
15
16
16
16
17
17
18
18
19
19
19
19
19
19
20
20
20
20
EN

7
PLAYER FUNCTIONS ...................................................................................................................
Menu/Title ..............................................................................................................................
Setup......................................................................................................................................
Display ...................................................................................................................................
Repeat Mode..........................................................................................................................
Repeat A-B Mode ..................................................................................................................
Multi-Angle/Subtitle/Audio .....................................................................................................
Zoom ......................................................................................................................................
Clear.......................................................................................................................................
Search....................................................................................................................................
DVD Mode......................................................................................................................
CD Mode........................................................................................................................
LCD Menu ..............................................................................................................................
Program Function ..................................................................................................................
USB/SD/MMC Card Access ..................................................................................................
SETUP ...........................................................................................................................................
Language Setup.....................................................................................................................
Screen Setup .........................................................................................................................
Audio Setup............................................................................................................................
Custom Setup ........................................................................................................................
SPECIFICATIONS .........................................................................................................................
HEADREST MOUNTING BAG PLACEMENT...............................................................................
TROUBLESHOOTING...................................................................................................................
TABLE OF CONTENTS
21
21
21
21
21
22
22
22
22
22
22
22
23
23
23
24
24
24
25
25
26
27
28
EN

8
Please make sure the following items are included in the package. If any items are missing, please
contact your local dealer.
PACKAGE CONTENTS
Audio & Video Cable
Headrest Mounting Bags
Car Adaptor with AV
cable
EN

9
ABOUT OPTICAL DISCS
Disc Requirements
This DVD player supports playback of the following discs.
Type Disc Mark Content Type Disc Size Max. Playback Time
DVD-Video Discs Audio + Video
(moving picture) 12 cm
133 min (SS-SL)
242 min (SS-DL)
266 min (DS-SL)
484 min (DS-DL)
Audio Compact Discs (CDs) Audio 12 cm 74 min
JPEG CDs -- Still Picture 12 cm --
This unit can play back CD-R and CD-RW discs that contain JPEG picture files. Discs not listed
above are not supported by this unit (eg, PC CD-ROM, CD-Extra, CD-G, CD-I, etc.)
Disc Care and Maintenance
Optical discs (DVDs, CDs) contain high-density compressed data and need proper handling.
Handling a Disc
Hold a DVD/CD by its edges. Avoid touch-
ing the recorded side of the disc. To remove
a DVD/CD from its storage case, press down
on the center retention mechanism of the case
and lift the disc out.
Do not subject discs to prolonged exposure to direct sunlight, high humidity, or high tem-
peratures.
Do not bend or press discs.
To reduce the risk of scratches, always put discs back in their case after use. Store discs
vertically in a cabinet.
Do not place stickers or labels on either side of a disc.
Cleaning a Disc
Use a dry, soft cloth to wipe off any fingerprints and dusts from the playing surface of the disc.
Wipe in a straight line radially from the center to the outside edge of the disc. Small dust particles
and light stains will not affect playback quality.
Never use chemicals such as record sprays, anti-static sprays, benzene, or thinners to clean
a disc. Doing so will damage the surface of the disc permanently.
Note: In stop mode, do not touch the disc until it completely stops.
•
•
•
•
•
•
EN

10
SPECIFICATIONS
SPECIFICATIONS
Main Unit
Monitor
198 165 37
830
mm
198 165 26
493
mm
1
6W
/PAL
Video Input
Audio Input
907-FD77-51D0-00R
Specifications and manual are subject to change without prior notice.
EN

• •
/USB/SD
LOCATION OF CONTROLS
For your reference:
Place a disc with the label facing up and push gently on the center of the disc so it goes into position.
To start playing, press the PLAY/PAUSE button. (Some discs will start playing automatically).
To stop playing, press the STOP button.
To Skip Forward/Skip Backward, press the NEXT/PREV button.
To Fast Forward/Fast Backward, press/hold the NEXT/PREV button.
1.
2.
3.
4.
5.
Front View
1Integrated Stereo Speakers
2Power on Indicator
3Battery LED Indicator
Lights red when charging the battery.
Lights green when the battery is fully
charged.
4Remote Sensor
5LCD Mode/USB/SD Button
Briefly press this button to display the LCD
Menu.
Press up/down direction button to high-
light item and then make adjustment by
left/right direction button.
Press up/down direction button to select
SCREEN and then press left/right direc-
tion button to set screen dimension as
•
•
•
1.
2.
Main unit
16:9 or 4:3
To reset all items, select RESET by up/down
direction button and then press ENTER button
to confirm.
Press and hold this button for a short while to dis
-
play the working source menu, you can access the
DVD/USB/Card using this menu.
6Setup
To access the setup menu which various features of
the player can be adjusted in.
7Stop
Press once to prestop the playback, press twice to stop
completely.
8Play/Pause
Press the Play/Pause button to play the disc. Press
again to pause playback.
9Up/Down/Left/Right / Enter buttons
Press the direction buttons to select an item and press
the ENTER to confirm
10 Fast Forward/Reverse
To fast forward/reverse during video/audio playback.
11 7″ TFT Display.
3.
•
1
2
34 5 6 7 8 9
10
11
I
11
EN

Back ViewLeft View Right View
Main unit
1
Left View
1DC 9V IN
To connect to the supplied AC Adaptor/DC Car
Cord for power supply.
2Power Switch
To turn on/off the unit.
3Headphone Jack
To connect to the supplied headphone. As the
headphone is plugged in, the speakers’ vol-
ume output will be OFF.
4Coaxial Out
To connect to an external speaker system by
the coaxial cable.
5Audio Jack
To connect to an external speaker system by
the supplied RCA cable.
6Video Jack
To connect to an external TV screen by the
supplied RCA cable.
7AV Switch
To turn the AV in or out.
8Hold Switch
Prevent any unwanted function changes in
PLAY or STOP mode.
Right View
9Headphone Jack
To connect the headphone.
Before connection, make sure that the volume
is at low level.
10 SD/MMC Card Slot
To Insert the SD/MMC card and to read datum
on SD/MMC card by the main unit.
11 USB Port
For use with USB flash drives.
12 Volume Dial
To Adjust the Volume Level.
Bottom View
13 Using the Stand
Lift up the stand from its groove.
Support it against the stand or draw the
stand out and then fix it in position by cliking
down the lock button.
A slopewise viewing position is realized.
14 Stand Lock
15 Battery Cover
1.
2.
3.
LOCATION OF CONTROLS
2
4
5
6
7
8
310
9
11
12
13
1415
12
EN

LOCATION OF CONTROLS
Monitor
Left View
1Power Switch
To turn on/off the unit.
Right View
2DC 9V In Jack
To Connect to the supplied AD Adaptor
or the DC Car Cord for power supply.
3Video Jack
To input the video signal.
4Audio Jack
To input the audio signal.
5Headphone Jack
To connect the Headphone.
Before connection, make sure that the
volume is at low level.
6Volume Dial
To adjust the Volume Level.
Front View
7Power On Indicator
8Mute Button
To turn off / restore the audio.
9Screen Ratio Button
To change the screen ratio to 4:3 or 16:9.
10 LCD Mode Button
you can adjust the screen effect in the LCD menu.
For operation details, please refer to the LCD Mode
of the Main unit.
11 Navigation Buttons and Enter button
To select and Confirm options in the LCD Menu and
Setup Menu of the monitor.
1
7
8
2
4
5
6
3
9
10
11
Front View
Left View Right View
13
EN

LOCATION OF CONTROLS
Remote Control
Step
Clear
Mute
DVD/
USB/
SD
Title
Power
Menu
Enter
Direction buttons
Mute
Numeric buttons
Clear
Repeat A-B
Repeat
Audio
Subtitle
Dispaly
LCD Mode
Setup
Play/Pause
Stop
Zoom
Prev./Nex/Skip
Fast Forward/Reverse
Step
Slow
DVD/USB/SD
Program
Angle
LCD
Mode
14
EN

LOCATION OF CONTROLS
Battery Installation
aa
15
EN

CONNECTIONS
Power, Audio and Video Output Connections
Before connecting the power source, ensure that all the connections are properly done.
Connecting to a wall outlet
Outputting audio and video signal from the main unit to the monitor by the DC car cord.
•
•
AC/DC adaptor for monitor:
This AC/DC adaptor should be
used with 100-240V~50/60Hz 0.5A
Max AC wall outlets.
DC Out: DC 9V
DC Current: 1A
Main Unit
Monitor
DC 9V in
Video in
Audio in
DC 9V in
Audio Jack
Video Jack
Do not plug in
AC/DC adaptor for main unit:
This AC/DC adaptor should be used
with 100-240V~50/60Hz 0.6A MAX
AC wall outlets.
DC Out: 9V
DC Current: 2.0A
To wall outlet
(100-240V 50/60Hz)
To wall outlet
(100-240V 50/60Hz)
Caution:
Do not connect the power plug to a power outlet other than that which is indicated here and on the label as this
may result in the risk of fire or electric shock.
Do not handle the power plug with wet hands. Doing so may cause electric shock.
Only use AC adaptors of the type specified here. Failure to do so may case a fire or damage the player.
Slide the AV switch
of the main unit to
Out.
16
EN

Main Unit Monitor
DC 9V in
Video in
Audio in
Using the car plug
Outputting audio and video signal from the main unit to the monitor.
•
•
To the Cigarette
Lighter Socket
DC 9V in
Audio Jack
Video Jack
CONNECTIONS
Audio and Video Connections (external device)
Slide the AV switch to AV IN to input the AV signal.
Slide the AV swith to AV OUT to output the AV signal.
External Device with
AV input / output.
Refer to the owner’s manual of the external device as well.
Before connecting the power source, ensure that all the connections are properly done.
If the player will not be used for a long period of time, disconnect the power and remove the battery from
the remote control.
1.
2.
3.
Main Unit
Monitor
External Device with AV output.
To Video in Jack
To Audio in Jack
To Video Jack
To Audio Jack
WARNING: Disconnect this car power adaptor when not in use.
Not for use in 24V vehicles.
17
EN

CONNECTIONS
USB/SD/MMC-Card Connection
Insert the USB/SD Card into the corresponding slot on the right panel of the main unit, press and hold the
LCD MODE/USB/SD button to display the DVD/USB/Card selection menu. Press the up/down direction
button to select USB or Card from the menu, press ENTER to access.
It takes a short while for the unit’s reading data. After the device is detected, the screen will display the
working menu, press the direction buttons to select the desired file from the menu and press Play/Pause
to start playback.
1.
2.
Connecting to an amplifier equipped with a Dolby Pro Logic Surround
Amplifier equipped with a
DolbyPro Logic Surround
To Coaxial Out
To Coaxial Input
Coaxial cable (not supplied)
When connecting the equipment to a receiver equipped
with Dolby Digital, refer to the owner’s manual.
18
EN

CONNECTIONS
Rechargeable Battery Pack
For new or exhausted rechargeable battery pack, we recommend it be recharged for 4 hours.
To charge the battery, just connect the AC adaptor.
If the battery does not work to your expectation, please consult service center.Do not attempt to
replace or repair the battery by yourself unless your are a qualified service personnel
(NI-MH Rechargeable Battery Pack)
The battery can be recharged about 300 times without obvious performance drop.
Note:
Use the special charger.
Never dispose of in fire or heat up.
Do not use in high temperature or near heat sources.
Do not open the cover. Refer servicing only to qualified service personnel.
Do not charge up the battery pack while the DVD player is working with the battery pack.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
Low Battery Detection
The unit will access to STANDBY mode automatically when the battery is low.
•
•
•
•
•
•
•
•
•
•
•
Using Headphones / Earphones
Maximum output voltage ≤ 150mV
HEADPHONE VOLUME WARNING
Connect earphones with the volume set low and increase it if required. Prolonged listening through some ear-
phones at high volume settings can result in hearing damage. When headphones/earphones are connected, no
sound will be emitted from the unit’s speaker.
Caution: Avoid listening to sound at levels which may be harmful to your ears.
Continuous use of earphones at high volume can damage the user’s hearing.
19
EN

BASIC OPERATIONS
“Invalid Disc”.
]Close the cover manually.
Slow/Step
cover facing up.
reverse
.
.
.
.
.
.
.
.
.
.
.
.
.
.
20
EN