DZEES DB2 User manual

Warranty Service
Thanks for your shopping and trust.
We have been optimizing our products and improve our lifetime customer service to oer
you a better shopping experience.
If you have any problems, please feel free to write us e-mail We will solve your problems
within 24 hours. In addition, your advice or suggestions will be much appreciated and
welcomed.
Register via link below to get 3 Years Warranty
Extension. (or scan this QR code)
Email:
Distributor:
[email protected]
[phone] (Mon-Fri 9:00 AM-5:00 PM EST)
[e-mail]
Web:
Facebook:
www.dzees.com
www.facebook.com/DzeesHome
Tel:
https://bit.ly/3zBSB2y
Product Service More About Us

What's included
Doorbell power on/o
Doorbell
1. Use the "pin" to insert into
the pinhole on the top of
the doorbell
2. Take out the
doorbell
3. Find the power button,
press and hold the power
button for 5 seconds
Flat mounting
bracket
3M tape Corner mount
(optional)
USB cable
Wedge screw
Removal pin
Manual
Micro SD card and power
adapter are not included
Wall screw
(wall anchor)
Doorbell chime
Note
Power button

1. Download & Install App
2. Account Registration
The doorbell supports Android and iOS system.
Please scan the QR code below or search 'Dzees Home'
in App store to download the App, and follow the
instruction to register account. If you encounter
any problems during the installation process, please
feel free to contact us via [e-mail]
New users need to sign up by Email ID.
Click 'Sign up a New Account' and follow the steps to complete the registration.
Step 1 Step 2 Step 3 Step 4

3. Add doorbell to App
1. Allow 'Dzees Home' App to access
mobile cellular data and wireless
LAN, or it will fail to add doorbell.
2. Allow 'Dzees Home' App to receive
pop-up messages, otherwise the
smart phone will not receive
notification when motion is detected.

3.1 Preparation for Connection
1. Insert Micro SD card when the
doorbell is Power o (Supports
up to 128GB. SD card not included).
The doorbell only works with 2.4GHz
Wi-Fi, not support 5GHz Wi-Fi.
2. Take the doorbell close to the
router while connecting.
3. Keep pressing the power button
for 2-4s to power on/o the doorbell.

3.2 Connect doorbell to App
Enable Bluetooth on the
mobile phone, then follow the
steps to add the device via
Dzess Home App.
3.2.1 Add doorbell by
connecting device hotspot:
Add doorbell Click "Next Step" Choose your device Input 2.4G WIFI password
Connecting the doorbell Click "Next Step" Click "Done" Connection succeeded

If Bluetooth is not enabled
on the mobile phone,
please follow the following
steps to add the device via
Dzees Home App.
If you can't hear 'Ding Dong Ding Dong,
please double-click the power button to
enter the network configuration mode again.
3.2.2 Add doorbell by
scanning QR code:
Add doorbell Click "Next Step" Click "Next Step" Choose "Connect via Wi-Fi"
Input 2.4G WiFi password Scan the QR code Connecting the doorbell
Please follow the text prompt of the APP for WIFI connection.
Tips :The above WiFi connection methods need
to turn on the Bluetooth of the mobile phone.
If the Bluetooth of the mobile phone is not
turned on, the doorbell will use the QR code mode
for WiFi connection. Connection succeeded

3.3 Connecting the chime
Connect the doorbell chime to the power supply of 5V/1A-5V/2A, and the doorbell chime will ring once.
1) Connecting the doorbell chime with a charger
Move the doorbell within 2
meters of the doorbell Chime,
so that the doorbell and the
doorbell chime can be paired
stably.
2) Bringing your doorbell
close to the chime
Press and hold the doorbell
button for 6 seconds, the
doorbell will ring twice,
send a connection signal,
and the doorbell chime
will ring.
4) Synchronizing the
doorbell with the chime
Press the doorbell button for
testing. When a chime rings,
it indicates that the connection
is successful.
5) Connection Successful
Press and hold the pairing
button on the front of the
indoor Ding Dong until you
hear a beep.
3) Putting the doorbell
chime into sync state

4. Install the Doorbell
Choose the right place to install
Note:
Determine the mounting position of the doorbell. Check if you can reuse the existing holes on the wall, if you don't
want to drill new holes to mount your video doorbell.
It is suggested to mount the doorbell at least 5 feet (150 cm) above the ground for the optimal angle of view and
best motion detection performance.
The doorbell, indoor unit, and router NEED to be as close as possible
(to avoid networking failure due to distance)
The doorbell should be installed on non-metallic porches and walls (to avoid signal shielding)
or axed to the wall on the door side.
1) Select a location for your video doorbell.