E-collar Easy educator ez-904 User manual

Easy Educator EZ-904

Quick Start Guide

E-Collar Technologies, Inc.

Welcome

Thank you for trusting us your purchase of the 904 Easy Educator

Remote Education Collar.We have made every attempt to provide you

with the most technologically advanced product using the most

stringent quality and manufacturing standards.

We are confident you will be pleased with the results you will attain with

the 904 Easy Educator. Please remember you will get better results with

the use of low level stimulation combined with consistent training tech-

niques. The use of high levels of stimulation should only be used as a last

resort and in life-threatening situations.

Good luck with your training and please feel free to contact us should you

have any questions.

* This guide will familiarize you with the basic functions, programming

features and the contents of the 904 Easy Educator.

Additional information and help is available on www.ecollar.com and

by by e-mailing [email protected]. To talk to a live team

member please contact our customer service department, 8 AM to 8

PM E.S.T., 1-855-326-5527 or (260) 357-0051. Your total satisfaction

is our only concern.

TABLE OF CONTENTS

Characteristics

Package Contents

Turning ON/OFF the EZ-904 System / Charging Instructions

EZ-904 Functions

LCD Display 4Dog Mode

Buttons Descriptions and Stimulation Button Assignments

I Mode

Lock and Unlock Stimulation Level

BoostedLevel Setup

Lost Transmitter Activation

Pairing

Warning Mode

EZ-904 Four Dog Default Settings

Warranty and Registration

CHARACTERISTICS

1/2 mile Range

Employs Quick Charge Li-Polymer Batteries

Convenient Intensity Dial for Quick Adjustment

Stimulation Levels Adjustable from 0 to 100

Collar Receiver Light for Night Tracking

“Lock and Set” Stimulation Safety Feature

User Adjustable Boosting Levels

Patented “I” Mode Provides Instant Stimulation

Waterproof and Shock Resistant

Specific Control Button for Each Dog

PACKAGE CONTENTS

Four Dog Transmitter/

Remote Controller

Quick Start Owner’s

Guide

Waterproof Collar

Receiver on High

Quality Biothane Strap

Test Light 5/8” and ¾” Contact

Points - 4 Sets

Contact Point Tool

Lanyard Battery ChargersSplitter Cables

Easy Educator EZ-904

Quick Start Guide

E-Collar Technologies, Inc.

Turn ON/OFF the transmitter by pressing the lower

right button for 1 second.

To turn ON/OFF the collar receiversposition the small red dot on the

transmitter/remote on the red dot on the collar receiver for 1 second.

Please charge the units on or before the

low battery indication. It is best not to wait

until the batteries are fully drained to

avoid damage. To charge insert the micro

USB into the transmitter and the charge

plug into the collar receiver as pictured.

Store with 50% charge in cool dry place.

Low Battery Indication

Transmitter: One bar remaining on the LCD display indicates charging is needed.

Collar Receiver: Yellow light indicates low and red indicates very low battery life.

Turning ON/OFF the EZ-904 System

Charging Instructions

splitter cable

Icon

M+

C+

Stimulation

Others

Function

Momentary Stimulation Send Momentary Stimulation (Volume Level)

Momentary Boost Stimulation Send Momentary Boosted Stimulation

(Volume + Boost Level)

Continuous Stimulation SendsContinuous Stimulation

(Max 10 sec, Volume Level)

Instant Mode Without pressing any button, it will send continuous

stimulation by rotating volume dial. (max 45 sec)

Vibration Send vibration (max 30 sec)

Tone Send tone (max 30 sec)

Continuous Boost Stimulation Send continuous boosting stimulation

(max 10 sec, volume + boost level)

Description

Icon Function Description

Easy Educator 904 provides 5 types of stimulation sensations, tone, and

vibration.

EZ-904 Functions

LCD DISPLAY

4 DOG Mode

Icon

M+

C+

Number

Description

Momentary Stimulation Short Pulse of Stimulation

Momentary Boost Stimulation Short Pulse of Boosted Stimulation

Continuous Stimulation Up to 10 Seconds of Stimulationㅤ

Instant Stimulation Mode

Stimulation Level Displayed on the LCD,

Must Start From “0”

Vibration Non Stimulation Sensation Similar to a

Vibrating Cell Phoneㅤ

Tone Audible Tone

Stimulation Level 0 to 100(HI) level

Continuous Boost Stimulation Up to 10 Seconds of Boosted Stimulation

Remarks

Buttons Descriptions and

Stimulation Button Assignments

The 904 Easy Educator has 4 control buttons which can be assigned to

stimulate, vibrateor produce a tone. S1 is programmed for Dog 1, S2 is

for Dog 2, S3 is for Dog 3, and S4 is for Dog 4. It also has 2 program

buttons (right side) for changing modesand turning the unit ON and OFF.

The convenient dial provides for easy and sight free control of the

stimulation level.

Volume Dial

Program Button (P)

S1-Button(1D)

S3-Button(3D)

S2-Button(2D)

S4-Button(4D) ON/OFF and Night

Light Control

Stimulation Control

Function Description

Power ON/OFF

Night Lights

Press more than 1 sec to turn on

Press more than 2 sec to turn off

Program

Buttons

ON/OFF

Mode Buttons

Vibration Mode

1D Volume lock : P+S1 (more than 1 sec)

2D Volume lock : P+S2 (more than 1 sec)

3D Volume lock : P+S3 (more than 1 sec)

4D Volume lock : P+S4 (more than 1 sec)

When Stimulation level is set to "0"

S1(Dog1) mode change: P+S1 (M C V T)

S2(Dog2) mode change: P+S2 (M C V T)

S3(Dog3) mode change: P+S3 (M C V T)

S4(Dog4) mode change: P+S4 (M C V T)

If pressed one time, all Momentary and

Continuous stimulation will be changed to

Vibration.

To exit from Warning Mode,

press P button again.

(toggling : blink solid off)

When Stimulation Level is Not 0

1D light : ON/OFF + S1

2D light : ON/OFF + S2

3D light : ON/OFF + S3

4D light : ON/OFF + S4

Stimulation

Lock

Control

Buttons

Function Possibilities

M / C(I) / V / T

2Dog

M / C(I) / V / T

M / C / V / T / 1D / 2D / 3D / 4D

Dog 1 Boost

S1+S2 Dog 2 Boost

S2+S1 Dog 3 Boost

S3+S4 Dog 4 Boost

S4+S3

3Dog

M / C(I) / V / T

4Dog

M / C(I) / V / T

1. To start Instant mode, rotate volume to level 0 and press continuous

button

2. To exit from Instant mode, press any button or wait for 45 sec.

S1-Button

S2-Button

S3-Button

S4-Button

LCD Display

Boost

Function

It is only activated when first button is M or C

1Dog

“I” Instant Stimulation Mode

The "I" mode is a patented feature which allows the stimulation to

increase gradually as determined by the user. The gradual introduction of

stimulation provides a more gentle sensation and removes the startling

effect sometimes associated with applying a constant level of stimulation.

The dog produces less cortisol and learns to avoid the higher levels by

responding quickly to the command. The user has the flexibility of

increasing the stimulation fast if the situation warrants a quick response

from the dog.

How Instant Stimulation “I” Mode Works

1. Change the mode of any S button to Continuous if not already

programmed to “C” mode : The stimulation dial must be turned to

“0” to enter the “I” mode.

2. To start the “I”, press the assigned Continuous button. The display

will flash On to indicate it is on and ready to begin stimulation.

3. Turning the stimulation will now activate the stimulation at the setting

of the dial and continue for 45 seconds.

Returning to “0” will reset the 45 second safety timer.

4. If you do not rotate the dial for 45 seconds the “I” mode will turn off

and the control button will need to be pushed again.

5. Pushing any of the other control buttons will turn off the “I” mode and

therefore require the “I” mode control be pushed again to reactivate it.

6. Again, to exit the Instant Mode, press any control button or wait for

45 seconds.

I Mode

Lock and Unlock Stimulation Level for Dog 1

1. Check LCD display to confirm 1D icon is blinking.

2. Set the desired stimulation to be locked by rotating the volume dial.

3. Press P and S1 simultaneously and hold for one second to lock.

4. Check LCD display to confirm 1D icon changes from blinking to solid

5. To unlock,press P button and S1 simultaneously and hold for one

second.

6. Check LCD display to confirm 1D icon changes solid to blinking.

Lock and Unlock Stimulation Level for Dog 2

1. Check LCD display to confirm 2D icon is blinking.

2. Set the desired stimulation to be locked by rotating the volume dial.

3. Press P and S2 simultaneously and hold for one second to lock.

4. Check LCD display to confirm 2D icon changes from blinking to solid

5. To unlock press P button and S2 simultaneously and hold for one

second.

6. Check display to confirm the 2D icon changes from solid to blinking.

Lock and Unlock

Stimulation Level

Lock and Unlock Stimulation Level for Dog 3

1. Check LCD display to confirm the 3D icon is blinking.

2. Set the desired stimulation to be locked by rotating the volume dial.

3. Press P and S3 simultaneously and hold for one second to lock.

4. Check display to confirm the 3D icon changes from blinking to solid

5. To unlock press P button and S3 simultaneously and for hold one

second.

6. Check display to confirm the 2D icon changes from solid to blinking.

Lock and Unlock Stimulation Level for Dog 4

1. Check LCD display to confirm the 4D icon is blinking.

2. Set the desired stimulation to lock by rotating the volume dial.

3. Press P and S4 simultaneously and hold for one second to lock.

4. Check display to confirm the 4D icon changes from blinking to solid

5. To unlock press the P button and S4 simultaneously and hold

one second.

6. Check display to confirm the 4D icon changes from solid to blinking.

Important Note: Blinking “1D”, “2D”, “3D”, or “4D” Indicates Unlocked

Solid “1D”, “2D”, “3D” or “4D” Indicates Locked

BoostedLevel Setup

Boost Level Setup for Dog 1

1. Change the mode of S1 button to Momentary if not already

programmed to “M” mode.

2. Change the Stimulation level to “0”

(Stimulation level should be unlocked)

3. Press Momentary button for more than 5 sec to enter into Boosted

Level Change Mode.

4. Check LCD displays M+ or C+ icon

5. Rotate the dial to change the booster level. (The range of boosted

level is from 1 to 60, default is 5)

6. Press he Momentary Button again to exit from BoostedLevel Change

Mode.

Boost Level Setup for Dog 2

1. Change the mode of S2 button to Momentary if not already

programmed to “M” mode.

2. Change the Stimulation level to “0”

(Stimulation level should be unlocked)

3. Press Momentary button for more than 5 sec to enter into Boosted

Level Change Mode.

4. Check LCD displays M+ or C+ icon

5. Rotate the dial to change the boostedlevel. (The range of boosted

level is from 1 to 60, default is 5)

6. Press the Momentary Button again to exit from BoostedLevel Change

Mode.

Boost Level Setup for Dog 3

1. Change the mode of S3 button to Momentary if not already

programmed to “M” mode.

2. Change the Stimulation level to “0”

(Stimulation level should be unlocked)

3. Press Momentary button for more than 5 sec to enter into Boosted

Level Change Mode.

4. Check LCD displays M+ or C+ icon

5. Rotate the dial to change the boostedlevel. (The range of boosted

level is from 1 to 60, default is 5)

6. Press Momentary Button again to exit from BoostedLevel Change

Mode.

Boost Level Setup for Dog 4

1. Change the mode of S4 button to Momentary if not already

programmed to “M” mode.

2. Change the Stimulation level to “0”

(Stimulation level should be unlocked)

3. Press Momentary button for more than 5 sec to enter into Boosted

Level Change Mode.

4. Check LCD displays M+ or C+ icon

5. Rotate the dial to change the boostedlevel. (The range of boosted

level is from 1 to 60, default is 5)

6. Press Momentary Button again to exit from Boosted Level Change

Mode.

Lost Transmitter Activation (6 hours timer) : ON/OFF (Bottom Right)

plus P (Top Right)

1. Change the Stimulation level to “0”

2. Press ON/OFF button and then press P button simultaneously.

3. One short beep will sound confirming the activation of the locator

timer.

4. To deactivate, press ON/OFF button and P button one more time.

5. Two short beeps will sound confirming the deactivation of the locator

timer.

6. The transmitter will start beeping exactly 6 hours from activation so

plan your excursion accordingly.

Lost Transmitter Activation

Pairing/Syncing

When you want to replace the transmitter or collar receiver with a new

transmitter or collar receiver it needs to bepaired to existing one.

Pairing for Dog 1 (ON/OFF + S1)

1. Turn on the Transmitter.

2. Rotate the intensity dial to “0”.

3. Turn off the collar receiver. Put the red dot on the transmitter against

the red dot on the collar receiver for more than 5 seconds untill

the solid green light starts blinking on and off rapidly.

4. Press the ON/OFF button and then press the S1 button (Side Top)

simultaneously.

5. Listen for confirmation sound from the Collar Receiver.

6. Test the collar receiver to make sure it accepted the new transmitter

pairing/syncing code.

Pairing for Dog 2 (ON/OFF + S2)

1. Turn on the Transmitter.

2. Rotate the intensity dial to “0”.

3. Turn off the collar receiver. Put the red dot on the transmitter against

the red dot on the collar receiver for more than 5 seconds untill

the solid green light starts blinking on and off rapidly.

4. Press the ON/OFF button and then press the S2 button

(Side Bottom) simultaneously.

5. Listen for confirmation sound from the Collar Receiver.

6. Test the collar receiver to make sure it accepted the new transmitter

pairing/syncing code.

Pairing for Dog 3 (ON/OFF + S3)

1. Turn on the Transmitter.

2. Rotate the intensity dial to “0”.

3. Turn off the collar receiver. Put the red dot on the transmitter against

the red dot on the collar receiver for more than 5 seconds untill

the solid green light starts blinking on and off rapidly.

4. Press the ON/OFF button and then press the S3 button (Front Top)

simultaneously.

5. Listen for confirmation sound from the Collar Receiver.

6. Test the collar receiver to make sure it accepted the new transmitter

pairing/syncing code.

Pairing for Dog 4 (ON/OFF + S4)

1. Turn on the Transmitter.

2. Rotate the intensity dial to “0”.

3. Turn off the collar receiver. Put the red dot on the transmitter against

the red dot on the collar receiver for more than 5 seconds untill

the solid green light starts blinking on and off rapidly.

4. Press the ON/OFF button and then press the S4 button

(Front Bottom) simultaneously.

5. Listen for confirmation sound from the Collar Receiver.

6. Test the collar receiver to make sure it accepted the new transmitter

pairing/syncing code.

Mode Toggle Feature

Switch from Stimulation to Vibration/Tone by Pressing the

"P" (Upper Right) Button

EZ-904 provides special a convenient feature to allow for easy/quick use of

stimulation with a 2 button boost and vibration/tone for all four dogs or how many

dogs you are training at any given time.

To toggle the mode from the Momentary or Continuous stimulation (default is

"M") simply press the "P" button one time and listen for the unique short beep

signaling that all the control buttons (S1 - S4) be changed to vibration/tone,

vibration is the default non stimulation mode. If you want to use tone please

refer to the mode section on page 9 to change any of the dogs from the

default settings

To change back to the stimulation modes simply press P button again. The

unique 2 button beep sound indicates you are back in stimulation mode. Play

with this feature until you feel confident before using the Easy Educator on

your dogs, the “M” and “C” icon will be appear again.

Table of contents

E-Collar Easy Educator EZ-904 User manual