E-TOP P/I-P5SVLL User manual

P
P/ /I I- -P P5 5S SV VL LL L
Pentium 4 Full-Size CPU Card With VGA &
Dual GIGA LAN
User`s Manual
Version 1.0

ii P/I-P5SVLL User`s Manual
Copyright Notice
This publication is protected by copyright and all rights are reserved. No
part of it may be reproduced or transmitted by any means or in any form,
without prior consent of the original manufacturer.
The information in this document has been carefully checked and is
believed to be accurate. However, the original manufacturer assumes no
responsibility for any inaccuracies that may appear in this manual. In no
event will the original manufacturer be liable for direct, indirect, special,
exemplary, incidental, incidental or consequential damages resulting
from any defect or omission in this manual, even if advised of possibility
of such damages. The material contained herein is for informational
purposes only.
Acknowledgments
Award is a registered trademark of Award Software International, Inc.
IBM, PS/2 are trademarks of International Business Machines
Corporation.
Intel, Pentium4 are registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft Corporation.
All other product names or trademarks are properties of their respective
owners.

Contents
P/I-P5SVLL User`s Manual iii
Contents
1............................................................................ 1
Introduction......................................................... 1
Checklist..................................................................................2
Description..............................................................................2
Features...................................................................................4
Specifications..........................................................................5
2............................................................................ 9
Installations......................................................... 9
CPU Installation...................................................................10
Memory Installation.............................................................11
Jumpers on the P/I-P5SVLL...............................................12
Jumper Locations on the P/I-P5SVLL ................................... 13
JP1 ~ 2: CPU Frequency Selector .......................................... 14
JP3: CMOS RAM Data.......................................................... 14
JP4~ 5: On-Board LAN Enable/Disable selection ................. 15
JP6: LCD PANEL Power Selection ....................................... 15
JP7: Panel Brightness Selection ............................................. 15
JP8: Panel Channel Selection................................................. 16
JP9: Panel Data Latch Edge Selection ................................... 16
JP10: Panel Input Data Format Type Selection...................... 16
COM2MODE1: COM2 RS232/RS422/RS485 Selection ...... 17
Connectors on the P/I-P5SVLL ..........................................18
Connector Locations on the P/I-P5SVLL .............................. 19
Front Panel Connector ........................................................20
EIDE Connectors ................................................................... 22
Floppy Drive Connector......................................................... 24
Parallel Port Connector .......................................................... 25
COM1 Serial Port................................................................... 26
COM2 Serial Port................................................................... 26
External Keyboard Connector................................................ 27
PS/2 Keyboard & Mouse Connector...................................... 27
VGA Connector .................................................................... 28
CPU Fan Power Connector .................................................... 28
USB Connectors..................................................................... 28

Contents
iv P/I-P5SVLL User`s Manual
IrDA Connector...................................................................... 29
ATX Power Connector........................................................... 29
Chassis Fan Power Connector................................................ 29
LAN- RJ45 Connector ........................................................... 30
LAN RJ45 LEDs.................................................................... 30
LANLED Connectors ............................................................ 31
AT Power P8 Connector ........................................................ 31
CD_IN Connectors................................................................. 32
Audio Connectors .................................................................. 32
LCD LVDS Connector........................................................... 33
WOL Connectors ................................................................... 33
SATA Connectors .................................................................. 33
Watchdog Timer Configuration .........................................34
3.......................................................................... 35
BIOS Configuration.......................................... 35
BIOS Introduction ...............................................................36
Starting Setup......................................................................... 36
Using Setup............................................................................ 37
Getting Help........................................................................... 39
In Case of Problems ............................................................... 39
Main Menu ...........................................................................40
Standard CMOS Features........................................................... 40
Advanced BIOS Features............................................................ 40
Advanced Chipset Features ........................................................ 41
Integrated Peripherals................................................................ 41
Power Management Setup .......................................................... 41
PnP / PCI Configuration............................................................. 41
PC Health Status......................................................................... 41
Frequency/Voltage Control......................................................... 41
Load Fail-Safe Defaults.............................................................. 41
Load Optimized Defaults ............................................................ 41
Supervisor / User Password........................................................ 41
Save & Exit Setup........................................................................ 41
Exit Without Save........................................................................ 41
Standard CMOS Setup........................................................42
Channel 0 HDDs / Channel 1 HDDs...................................... 44
Drive A / Drive B................................................................... 46
Video...................................................................................... 46
Halt On................................................................................... 46
Advanced BIOS Features....................................................47

Contents
P/I-P5SVLL User`s Manual v
CPU Feature ........................................................................... 48
Delay Prior Thermal............................................................... 48
The choice: 4Min, 8Min, 16Min, 32Min. .............................. 48
Thermal Management ............................................................ 48
Limit CPU MaxVal ................................................................ 48
Set Limit CPUID MaxVal to 3, Should Be “Disabled” for
WinXp.................................................................................... 48
The choice: Enabled, Disabled............................................... 48
Hard Disk Boot Priority ......................................................... 49
Bootable Add-in Cards........................................................... 49
Virus Warning........................................................................ 49
CPU L1 & L2 Cache .............................................................. 49
Quick Power On Self Test...................................................... 50
First/Second/Third/Other Boot Device .................................. 50
Swap Floppy Drive ................................................................ 50
Boot Up Floppy Seek ............................................................. 50
Boot Up NumLock Status ...................................................... 50
Gate A20 Option .................................................................... 50
Typematic Rate Setting .......................................................... 51
Security Option ...................................................................... 51
MPS Version Control For OS ................................................ 51
The choice: 1.1, 1.4. ............................................................... 51
OS Select For DRAM > 64MB .............................................. 51
Report No FDD For WIN 95.................................................. 52
Advanced Chipset Features.................................................53
DRAM Settings...................................................................... 53
DRAM Timing Selectable...................................................... 54
CAS Latency Time................................................................. 54
Active to Precharge Delay...................................................... 54
DRAM RAS# to CAS# Delay................................................ 54
DRAM RAS# Precharge ........................................................ 54
System BIOS Cacheable ........................................................ 55
Video BIOS Cacheable .......................................................... 55
Memory Hole at 15MB - 16MB............................................. 55
AGP Aperture Size (MB)....................................................... 55
Init Display First .................................................................... 55
On-Chip VGA Setting............................................................ 56
On-Chip VGA...............................................................................56
On-Chip Frame Buffer Size..........................................................56
Boot Display ................................................................................56
Panel Number..............................................................................56
OnChip IDE Device ............................................................... 57

Contents
vi P/I-P5SVLL User`s Manual
IDE HDD Block Mode .......................................................... 58
The choice: Enabled, Disabled............................................... 58
IDE DMA transfer access ...................................................... 58
The choice: Enabled, Disabled............................................... 58
On-Chip Primary PCI IDE..................................................... 58
On-Chip Secondary PCI IDE................................................. 58
IDE Primary/Secondary Master/Slave PIO............................ 58
Primary/Secondary Master/Slave UDMA.............................. 59
On-Chip Serial ATA Setting.................................................. 59
SATA Mode ................................................................................. 59
On-Chip Serial ATA.................................................................... 59
Serial ATA Port0 Mode............................................................... 59
Serial ATA Port1 Mode............................................................... 59
Onboard Device ..................................................................... 60
USB Controller ...................................................................... 60
USB 2.0 Controller ................................................................ 60
USB Keyboard Support ......................................................... 60
USB Mouse Support .............................................................. 61
AC97 Audio ........................................................................... 61
SuperIO Device...................................................................... 61
Onboard FDC Controller ....................................................... 61
Onboard Serial Port 1/Port 2.................................................. 62
UART Mode Select................................................................ 62
RxD, TxD Active ................................................................... 62
IR Transmission Delay........................................................... 62
UR2 Duplex Mode ................................................................. 62
Onboard Parallel Port............................................................. 62
Parallel Port Mode ................................................................. 62
EPP Mode Select.................................................................... 63
ECP Mode Use DMA ............................................................ 63
PWRON After PWR-Fail....................................................... 63
Power Management Setup...................................................64
Power-Supply Type................................................................ 64
ACPI Function ....................................................................... 65
ACPI Suspend Type............................................................... 65
Power Management................................................................ 65
Video Off Method.................................................................. 65
Video Off In Suspend ............................................................ 66
MODEM Use IRQ ................................................................. 66
Suspend Mode........................................................................ 66
HDD Power Down ................................................................. 66

Contents
P/I-P5SVLL User`s Manual vii
Soft-Off by PWR-BTTN........................................................ 66
CPU THRM-Throttling.......................................................... 66
Wake-Up by PCI card ............................................................ 66
Power On By Ring ................................................................. 67
Wake Up On LAN ................................................................. 67
The choice: Enabled, Disabled....................................................67
Resume by Alarm................................................................... 67
Reload Global Timer Events.................................................. 67
Primary/Secondary IDE 0/1........................................................67
FDD, LPT & COM ......................................................................67
PCI PIRQ[A-D]#.........................................................................67
PnP/PCI Configuration Setup.............................................68
PNP OS Installed.................................................................... 68
Reset Configuration Data....................................................... 69
Resource controlled by........................................................... 69
IRQ Resources ....................................................................... 69
Memory Resources................................................................. 69
PCI/VGA Palette Snoop......................................................... 69
INT Pin 1 Assignment............................................................ 70
INT Pin 2 Assignment............................................................ 70
INT Pin 3Assignment............................................................. 70
INT Pin 4 Assignment............................................................ 70
INT Pin 5 Assignment............................................................ 70
INT Pin 6 Assignment............................................................ 70
INT Pin 7 Assignment............................................................ 71
INT Pin 8 Assignment............................................................ 71
PC Health Status..................................................................72
CPU Warning Temperature.................................................... 72
Current System Temperature ................................................. 72
Current CPUDIE Temperature............................................... 72
Current Board Temperature ................................................... 72
CPU Fan Speed ...................................................................... 73
System Fan Speed .................................................................. 73
Vcore/1.5V/3.3V/5V/12V/-12V/-5V/VBAT(V)/5VSB(V)
Voltages.................................................................................. 73
Shutdown Temperature .......................................................... 73
Frequency/Voltage Control.................................................74
Auto Detect DIMM/PCI Clk .................................................. 74
Spread Spectrum .................................................................... 74
Load Fail-Safe Defaults .......................................................75
Load Optimized Defaults.....................................................75
Set Supervisor/User Password Setting ...............................76

Contents
viii P/I-P5SVLL User`s Manual
Exit Selecting........................................................................77
Save & Exit Setup ................................................................. 77
Exit Without Saving............................................................... 77
4.......................................................................... 79
Appendix............................................................ 79
A. I/O Port Address Map ....................................................80
B. Interrupt Request Lines (IRQ).......................................81
C. POST Beep.......................................................................82

Chapter 1 Introduction
P/I-P5SVLL User`s Manual 1
1
Introduction
This manual is designed to give you information on the P/I-P5SVLL
SBC card. The topics covered in this chapter are as follows:
♦Checklist
♦Description
♦Features
♦Specifications

Chapter 1 Introduction
2 P/I-P5SVLL User`s Manual
Checklist
Please check that your package is complete and contains the items
below. If you discover damaged or missing items, please contact your
dealer.
9The P/I-P5SVLL Industrial SBC Card
91 ATA100 IDE Ribbon Cable
91 Floppy Ribbon Cable
91 Serial Port Ribbon Cable and 1 Parallel Port attached to a
Mounting Bracket
91 Serial Port Ribbon Cable attached to a Mounting Bracket
91 Seria ATA cable
91 CD Disc Containing 865G VGA Drivers, 82541 LAN
Driver, Intel chipset drivers, BIOS Update Utility and this
User`s manual.
9PS/2 Keyboard and Mouse 1-to-2 Y-cable
9PS/2 to AT Keyboard Cable
Description
The P/I-P5SVLL is a Pentium 4 Industrial single board computer (SBC)
card based on Intel 865G chipset and is designed for harsh industrial
environment. It features one 478-pins Socket, which is compatible
with Intel uFC-PGA package Pentium 4 processor. This card
accommodates up to 2GB of DDR400 SDRAM memory.
The P/I-P5SVLL is a high integration design. Two Intel Gigabit
Ethernet Controllers, RealTek Audio Codec and Chrontel LVDS
Encoder are integrated into the system. The high-integration design
prevents the system compatibility issues and increases the PCI add-on
cards scalability. This makes P/I-P5SVLL an ideal SBC card for CTI,
ISP servers, workstations, automation as well as other industrial
applications.
P/I-P5SVLL provides the most complete features needed for
system operation. These include Two Gigabits LAN, Audio, LVDS
Encoder, Dual channel UDMA100 IDE drive controller, Dual

Chapter 1 Introduction
P/I-P5SVLL User`s Manual 3
SATA-150 ports with RAID 0 and 1 support, high performance serial
ports, enhanced parallel port, and the most updated BIOS. Four USB
2.0 ports and a programmable watchdog timer are available on-board.
What’s more, the Intel 865G on-board incorporates the latest
microprocessor technology to provide the increased bandwidth needed
to operate your system bus at speeds up to 800MHz FSB.
The P/I-P5SVLL comes with integrated hardware monitoring device
that monitors system and CPU temperature, voltages of all system
power rails, and CPU fan speeds to prevent system crashes by warning
the user of adverted conditions. The power management feature
provides power savings by slowing down the CPU clock, turning off
the monitor screen and stopping the HDD spindle motor.

Chapter 1 Introduction
4 P/I-P5SVLL User`s Manual
Features
Intel Pentium 4 Full-Size PICMG CPU Card supports Pentium
4/Celeron D/Core™ 2 Duo (LGA775) CPU.
Intel 865G integrated IEG2 supports excellent 2D/3D performance.
Dual Gigabits LAN support Load-Balancing and Fault-Tolerance.
Supports LVDS LCD up to Dual Channels 24-bits LCD Panel.
Multiple I/O support, up to 6 x USB ports and 2 x COM ports. COM2 is
RS232/422/485 selectable.

Chapter 1 Introduction
P/I-P5SVLL User`s Manual 5
Specifications
•CPU:
Intel Pentium 4/Celeron D/Core™ 2 Duo CPU up to 3.4GHz,
FSB speed 400/533/800MHz selectable by jumpers.
LGA775 Socket.
•System BIOS:
Award 4M-bit Flash Bios, update utility is available.
•Main Memory:
Two 184-pins DIMM sockets for DDR266/333/400 SDRAM
up to 2 GB.
•Chipset:
Intel 865G and 82801ER (ICH5R).
•Gigabits LAN:
Dual Intel Gigabits Ethernet LAN ports. Intel 82541GI
controller.
Dual-LAN design support Teaming, Fault-Tolerance and
Load-Balancing. Host Off-Loading features to minimize
CPU utilization.
Boot Agent integrated System Bios, supports PXE and RPL
protocol.
•VGA:
865G Integrated Extreme Graphic 2 Engines.
Supports CRT and LVDS LCD panel for Dual Display and
Rotation supported by drivers.
•On Board I/O:
Two Bus Master EIDE channels support PIO mode 3 and mode 4,
Ultra DMA33/66/100 IDE HDD, ATAPI CD-ROM and LS-120
drive.
Two 40-pins IDE connectors support 3.5” HDD/CDROM.
Two SATA ports up to 150MB/s. Two SATA ports can be
configured as RAID0 or RAID1.
6 USB 2.0 ports in 2 x 5-pins pin-header for internal connections.
2 COM ports in 2 x 5-pins box-header support standard RS-232
protocols. COM2 is RS232/422/485 selectable by jumpers.
1 x Parallel port supports SPP/ECP/EPP mode.
1 x IrDA port.
1 x standard 34-pins FDD connector.

Chapter 1 Introduction
6 P/I-P5SVLL User`s Manual
•3D Audio:
3D AC97 Audio CODEC with Line-Out, Line-In,
Microphone and CD-In.
•BIOS:
Phoenix-Award Standard PnP BIOS 6.2.
4Mbit FlashROM with BootBlock for Fail-safe.
Enhanced ACPI and DMI2.0 compliant.
BIOS utility for field update.
VBIOS and LAN remote Boot Agent integrated.
32-pins PLCC type socket for easy field replacement.
•ISA and PCI Expansion Slot:
Full-Size PICMG 2.0 Compliant form-factor with ISA and
32-bits PCI golden-edge.
•Power Connector:
One ATX12V 2x2 connector on-board to support CPU
Vcore power.
One AT P8 6-pins connector on-board to support without
Backplane operation.
One 4-pins ATX STBPWR connector on board to supply
5V Standby power and support Power-button operation
when use ATX PSU.
•Cooling:
One CPU cooling FAN connector near by CPU socket.
One System cooling FAN connector on board.
CPU heatsink retention module with metal plat on the
backside of CPU socket.
•USB Interface:
•Three USB pin-header connectors, compliant with USB
Specification Rev. 2.0 and support USB Hot-Plug function.
•Support Legacy USB devices and Boot from USB devices
like USB-HDD, USB-Floppy and USB-CDROM.

Chapter 1 Introduction
P/I-P5SVLL User`s Manual 7
•ATX Power Supply support:
On-borad 4-pin ATX power supply header (requires the passive
backplane supports ATX power supply)
On-board power button header for Soft power off, i.e. front
panel turn off system power.
Support Windows2K/XP shutdown automatically turn off the
system power.
Instant-off or delay-4-seconds selectable via BIOS setup.
•Hardware Monitoring:
PC Health Monitoring ASIC on-board to monitor System
power rails, FAN speeds, CPU and System temperatures.
•Watchdog Timer:
Programmable watchdog timer from 1~255 seconds.
•Keyboard and Mouse Connectors:
One 6-pin mini-DIN connector is located on the mounting
bracket for easy connection to a keyboard and PS/2 mouse. A
5-pin on-board keyboard pin header connector is also
available to support PC/AT style external keyboard
connector on backplane.
•PICMG Compliance: Fully compliant to PICMG 2.0 standards.
•Board Dimension:
338mm (W) x 122mm (L).
PICMG 1.0 Full-Size CPU Card Form Factor.
•Power Requirement:
6A @ +5V (typical); 8A @ +12V (typical); 100mA @ -12V.
•Operating Temperature:
0 to 60°C operating temperature.
Relative Humility: 5~95%, non-condensing.

Chapter 1 Introduction
8 P/I-P5SVLL User`s Manual
This page is intentionally left blank.

P/I-P5SVLL User`s Manual 9
2
Installations
This chapter provides information on how to use the jumpers and
connectors on the P/I-P5SVLL in order to set up a workable system. The
topics covered are:
♦CPU Installation
♦Memory Installation
♦Jumpers on the P/I-P5SVLL
♦Connectors on the P/I-P5SVLL
♦Watchdog Timer Configuration

Chapter 2 Installations
10 P/I-P5SVLL User`s Manual
CPU Installation
The P/I-P5SVLL Industrial SBC Card provides a 775-pins ZIF socket
for Pentium 4 processors with FC-PAG2 package.
To Install a CPU, first turn off your system and remove its cover. Locate
the ZIP socket and open it by first pulling the lever sideways away from
the socket then upwards to a 90-degree right angle. Insert the CPU with
the correct orientation. Use the notched corner of the CPU with the white
dot as your guide. The white dot should point towards the end of the
lever. Notice that there is a blank area where one hole is missing from
that corner of the square array of pin holds. Because the CPU has a
corner pin for three of the four corners, the CPU will only fit in one
orientation. With the added weight of the CPU fan, no force is required
to insert the CPU. Once completely inserted, hold down on the fan and
close the socket lever.
To disassembly the processor, simply pull the lever sideways away from
the socket then upward to a 90-degree right angle. You can take the CPU
out from the socket without help of any tool.
After installing the processor into the Socket, ensure that the CPU fan is
installed first. Without a fan circulating air on the CPU, the CPU can
overheat and cause damage to both CPU and SBC card.
WARNING!: If no FAN circulating Air on the CPU, the processor
might been overheated and damage both CPU and SBC components.
IMPORTANT: You must set jumpers for “CPU FSB speed” depending
on the CPU that you install.

Chapter 2 Installations
P/I-P5SVLL User`s Manual 11
Memory Installation
The P/I-P5SVLL Industrial CPU Card provides two 184-pin DIMM
sockets for a maximum total memory of 2GB SDRAM. The memory
modules can come in sizes of 128MB, 256MB, 512MB and 1GB
SDRAM.
The P/I-P5SVLL Industrial CPU Card supports two 184-pin DIMM
(Dual In-line Memory Module) sockets. In populating the DIMM
sockets, DIMM1 bank should be populated first for less signal reflection.
However, we do not see any issue while populate DIMM2 only. Refer to
the following table on how to configure the memory.
NOTE: Use SDRAM modules with PC2100 specification when running
DDR266 Memory bus speed. With DDR200 Memory bus speed, SDRAM
modules meet PC1600 or PC2100 specification can be used.
184-pin DIMM (2.5V) Unregistered SDRAM
Bank0
(DIMM1) Bank1 (DIMM2) Total Memory
128MB ----- 128MB
256MB ----- 256MB
512MB ----- 512MB
1GB ----- 1GB
128MB 128MB 256MB
128MB 256MB 384MB
128MB 512MB 640MB
256MB 128MB 384MB
256MB 256MB 512MB
256MB 512MB 768MB
256MB 1GB 1280MB
512MB 128MB 640MB
512MB 256MB 768MB
512MB 512MB 1GB
512MB 1GB 1536MB
1GB 1GB 2GB

Chapter 2 Installations
12 P/I-P5SVLL User`s Manual
Jumpers on the P/I-P5SVLL
The jumpers on the P/I-P5SVLL allow you to configure your SBC card
according to the needs of your applications. If you have doubts about the
best jumper configuration for your needs, contact your dealer or sales
representative. The following table lists the jumpers on P/I-P5SVLL and
their respective functions.
Jumper Locations on the P/I-P5SVLL .................................. 13
JP1~2: CPU Frequency Selector ............................................14
JP3: CMOS RAM Data ..........................................................14
JP4~ 5: On-Board LAN Enable/Disable selection ................ 15
JP6: LCD PANEL Power Selection .......................................15
JP7: Panel Brightness Selection .............................................15
JP8: Panel Channel Selection ................................................ 16
JP9: Panel Data Latch Edge Selection.... …………………....16
JP10: Panel Input Data Format Type Selection..................... 16
COM2MODE1: RS232/RS422/RS485 Selection ..................17