E-TOP PI-P5BVLL User manual

PI-P5BVLL
Intel® Core™ 2Quad Q35 PICMG 1.0 SBC
User’s Manual
Version 1.0

PI-P5BVLL User`s Manual ii
Copyright Notice
This publication is protected by copyright and all rights are reserved.
No part of it may be reproduced or transmitted by any means or in any
form, without prior consent of the original manufacturer.
The information in this document has been carefully checked and is
believed to be accurate. However, the original manufacturer assumes
no responsibility for any inaccuracies that may appear in this manual.
In no event will the original manufacturer be liable for direct, indirect,
special, exemplary, incidental, incidental or consequential damages
resulting from any defect or omission in this manual, even if advised of
possibility of such damages.
The material contained herein is for informational purposes only.
Acknowledgments
Award is a registered trademark of Award Software International, Inc.
IBM, PS/2 are trademarks of International Business Machines
Corporation.
Intel Pentium4 is registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
All other product names or trademarks are properties of their
respective owners.

Contents
PI-P5BVLL User`s Manual iii
Contents
INTRODUCTION..................................................................................1
CHAPTER 1 .........................................................................................2
FEATURES & SPECIFICATIONS.............................................................2
FEATURES.............................................................................................. 3
SPECIFICATIONS ...................................................................................... 4
CHAPTER 2 .........................................................................................7
JUMPER SETTING & CONNECTORS .....................................................7
2.1 JUMPERS ON THE PI-P5BVLL.............................................................. 8
Jumper Locations on the PI-P5BVLL ............................................... 9
JP1: Clear CMOS RAM Data.......................................................... 10
JP2, JP3, JP4: Front Side Bus Selection.......................................... 11
AT_MODE: Power Supply Mode Selection.................................... 11
COM2MODE: RS232/RS422/RS485 .............................................. 12
LCDPWR: LCD PANEL Power Selection.......................................... 12
2.2 CONNECTORS ON THE PI-P5BVLL...................................................... 13
Connector Locations on the PI-P5BVLL......................................... 14
DIO Connector .............................................................................. 15
USB12, 34, 56 Connectors ............................................................ 15
SATA1~6 Connectors .................................................................... 16
VGA Connector ............................................................................. 16
LAN1, 2- RJ45 Connectors............................................................. 17
LAN RJ45 LED1, 2.......................................................................... 17
AUDIO Connector ......................................................................... 18
CD_IN Connector .......................................................................... 18
PS/2 Keyboard & Mouse Connector ............................................. 19
FRONT_PANEL Connector............................................................. 19
System FAN Connector ................................................................. 21
CPU FAN Connector...................................................................... 21
IRDA Connector ............................................................................ 21
COM1 Serial Port.......................................................................... 22
COM2 Serial Port.......................................................................... 22
IDE Connector............................................................................... 23
LAN1_LED Connector.................................................................... 23
LAN2_LED Connector.................................................................... 24
SPDIF Connector ........................................................................... 24
ATX_12V Connector...................................................................... 24
Floppy Drive Connector ................................................................ 25
WOL Connector ............................................................................ 25

Contents
iv PI-P5BVLL User`s Manual
PRINTER Connector ...................................................................... 26
DVI Connector .............................................................................. 27
BACKLITE Connector..................................................................... 27
LVDSLCD Connector...................................................................... 28
AT_KB Connector ......................................................................... 29
ATX_PWR ..................................................................................... 29
CHAPTER 3 BIOS SETUP ....................................................................31
BIOS Introduction ......................................................................... 32
Starting Setup .............................................................................. 32
3.1 MAIN MENU.................................................................................. 33
Setup Items .................................................................................. 33
Standard CMOS Features ............................................................. 33
Advanced BIOS Features .............................................................. 33
Advance Chipset Features ............................................................ 33
Integrated Peripherals ................................................................. 34
Power Management Setup .......................................................... 34
PnP/PCI Configurations ................................................................ 34
PC Health Status........................................................................... 34
Load Fail-Safe Defaults ................................................................ 34
Load Optimized Defaults.............................................................. 34
Set Supervisor/ User Password .................................................... 34
Save & Exit Setup ......................................................................... 34
Exit Without Saving...................................................................... 34
3.2 STANDARD CMOS FEATURES............................................................ 35
IDE Channel 0, 1 Master/ Slave.................................................... 37
IDE Channel 2, 3, 4 Master/ Slave ................................................ 38
Extended IDE Drive..............................................................................38
Drive A/B ...................................................................................... 40
Video ............................................................................................ 40
Halt On......................................................................................... 40
3.3 ADVANCED BIOS FEATURES.............................................................. 41
CPU Feature ................................................................................. 42
PPM Mode...........................................................................................42
Limit CPUID Max Val............................................................................42
C1E Function........................................................................................42
Execute Disabled Bit ............................................................................42
Hard Disk Boot Priority................................................................. 43
Bootable Add-in Cards.........................................................................43
Virus Warning .............................................................................. 44
Hyper-Threading Technology....................................................... 44
Quick Power On Self Test ............................................................. 44
First/Second/Third Boot Device.................................................... 44

Contents
PI-P5BVLL User`s Manual v
Boot Other Device ........................................................................ 45
Swap Floppy Drive ........................................................................ 45
Boot Up Floppy Seek..................................................................... 45
Boot Up Num Lock Status............................................................. 45
Gate A20 Option........................................................................... 45
Typematic Rate Setting ................................................................ 45
Typematic Rate (Chars/Sec) ......................................................... 46
Typematic Delay (Msec) ............................................................... 46
Security Option............................................................................. 47
APIC Mode.................................................................................... 47
MPS Version Control For OS ......................................................... 47
OS Select For DRAM > 64MB ........................................................ 47
Report No FDD For WIN 95 .......................................................... 47
3.4 ADVANCED CHIPSET FEATURES .......................................................... 48
DRAM Timing Selectable .............................................................. 49
CAS Latency Time ......................................................................... 49
DRAM RAS# to CAS# Delay........................................................... 49
DRAM RAS# Precharge................................................................. 49
Precharge dealy (tRAS)................................................................ 49
System Memory Frequency .......................................................... 49
System BIOS Cacheable ................................................................ 49
Memory Hole At 15M-16M .......................................................... 50
PCI Express Root Port Func........................................................... 50
PCI Express Port 1, 2, 3, 4, 5, 6............................................................ 50
PCI-E Compliancy Mode ...................................................................... 50
On-Chip Frame Buffer Size............................................................ 50
DVMT Mode ................................................................................. 50
DVMT / FIXED Memory Size ......................................................... 51
Boot Display ................................................................................. 51
Panel Number............................................................................... 51
Lan1 Chip Control ......................................................................... 51
Lan2 Chip Control ......................................................................... 51
3.5 INTEGRATED PERIPHERALS................................................................. 52
On Chip IDE Device ....................................................................... 52
IDE HDD Block Mode........................................................................... 53
IDE DMA transfer access ..................................................................... 53
IDE Primary/Secondary, Master/Slave PIO........................................ 53
IDE Primary/Secondary, Master/ Slave UDMA.................................... 53
On-Chip Secondary PCI IDE ................................................................. 54
SATA Mode.......................................................................................... 54
LEGACY Mode Support........................................................................ 54
Super IO Device ............................................................................ 54
Onboard FDC Controller...................................................................... 54
Onboard Serial Port 1.......................................................................... 54

Contents
vi PI-P5BVLL User`s Manual
Onboard Serial Port 2 ..........................................................................55
UART Mode Select...............................................................................55
RxD, TxD Active..................................................................................55
IR Transmission Delay..........................................................................56
UR2 Duplex Mode ...............................................................................56
Onboard Parallel Port..........................................................................56
Parallel Port Mode...............................................................................56
EPP Mode Select..................................................................................57
ECP Mode Use DMA ............................................................................58
EPP Mode Select..................................................................................58
ECP Mode Use DMA ............................................................................58
PWRON After PWR-Fail .......................................................................58
Watch Dog Timer Select............................................................... 59
USB Device Setting ....................................................................... 59
USB 1.0 Controller ...............................................................................59
USB 2.0 Controller ...............................................................................59
USB Operation Mode...........................................................................59
USB Keyboard Function .......................................................................59
USB Mouse Function ...........................................................................60
USB Storage Function ..........................................................................60
3.6 POWER MANAGEMENT SETUP........................................................... 61
PCI Express PM Funtion................................................................ 62
ACPI Function ............................................................................... 62
Power Management .................................................................... 62
Video off Method ......................................................................... 63
Video Off In Suspend .................................................................... 63
Suspend Type ............................................................................... 63
MODEM Use IRQ .......................................................................... 63
Suspend Mode.............................................................................. 63
HDD Power Down......................................................................... 64
Soft-Off by PWR-BTTN.................................................................. 64
CPU THRM-Throttling................................................................... 64
Wake-Up by PCI card ................................................................... 64
Power On by Ring......................................................................... 64
USB KB Wake-Up From S3............................................................ 64
Resume by Alarm ......................................................................... 65
Date (of Month) Alarm................................................................. 65
Time (hh: mm: ss) Alarm .............................................................. 65
Primary/ Secondary IDE 0/1......................................................... 65
FDD, COM, LPT Port ..................................................................... 66
PCI PIRQ [A-D] # ........................................................................... 66
3.7 PNP/PCI CONFIGURATION ............................................................... 67
Init Display First............................................................................ 67
Reset Configuration Data............................................................. 68

Contents
PI-P5BVLL User`s Manual vii
Resources Controlled By ............................................................... 68
IRQ Resource ................................................................................ 69
IRQ-3,4,5,7,9,10,11,12,14,15 assigned to ........................................... 69
DMA Resource.............................................................................. 70
DMA-0 , 1, 3, 5, 6, 7 assigned to.......................................................... 70
PCI/VGA Palette Snoop................................................................. 71
INT Pin 1/2/3/4/5/6/7/8 Assignment........................................... 71
Maximum Payload Size ................................................................ 71
3.8 PC HEALTH STATUS ......................................................................... 72
CPU Warning Temperature .......................................................... 72
Current System Temp ................................................................... 72
Current CPU Temp........................................................................ 72
CPU FAN Speed............................................................................. 73
CHASSIS Fan Speed....................................................................... 73
POWER Fan Speed........................................................................ 73
Shutdown Temperature ............................................................... 73
3. 9LOAD FAIL-SAFE DEFAULTS............................................................... 74
3.10 LOAD OPTIMIZED DEFAULTS............................................................ 74
3.11 SET SUPERVISOR/USER PASSWORD.................................................. 75
3.12 SAVE &EXIT SETUP ....................................................................... 77
3.13 EXIT WITHOUT SAVING .................................................................. 77
CHAPTER 4 APPENDIX ......................................................................79
A. I/O PORT ADDRESS MAP ................................................................... 80
B. INTERRUPT REQUEST LINES (IRQ) ........................................................ 81
C. POST BEEP...................................................................................... 82

Contents
viii PI-P5BVLL User`s Manual
This page is intentionally left blank

PI-P5BVLL User`s Manual 1
Introduction
This manual is designed to give you information on the PI-P5BVLL
Single Board Computer card.
The topics covered in this manual are as follows:
Features
Specification
Jumper setting and Connectors
BIOS Setup
Appendix

2 PI-P5BVLL User`s Manual
Chapter 1
Features & Specifications
FEATURES ..............................................................................................3
SPECIFICATIONS.......................................................................................4

PI-P5BVLL User`s Manual 3
Features
Support Intel® Core 2 Quad, Core 2 Duo, Pentium-D, Pentium 4,
Celeron D processor in LGA775 package with FSB
800M/1066/1333MHz.
Two DDR2 1.8V DIMM sockets support up to 4GB system
memory in Dual Channel Mode. System memory speed can be
DDR2 800 or 667MHz.
Six SATA ports support up to 6 SATA 3Gbps devices. Support
RAID0, RAID 1, RAID 5, and RAID10.
Dual GbE LAN design maximized the communication
bandwidth for both internet and intranet connection. Root
Boot and Wake Up on LAN supported.
Multiple I/O functions: 6 x USB2.0, 2x COM ports, 6x SATA,
IRDA, 1x PIDE, 1x LPT, 1x FLOPPY.
High-Definition Audio Codec support Line-out, Line-in and
Microphone, CD-IN and SPDIF.
PICMG 1.0 Standard form factor support PCI and ISA interface.
Multiple display technology: Support CRT, Dual channel 24-bits
LVDS LCD display and DVI interface Display.

4 PI-P5BVLL User`s Manual
Specifications
Processor Support:
Intel® Core 2 Quad, Core 2 Duo, Pentium-D, Pentium 4,
Celeron D processor .
Support Front Side Bus speed 800MHz, 1066MHz and
1333MHz.
LGA775 socket
Major Chipset:
Intel Q35 and ICH9DO chipset.
RealTek RTL8111C LAN chip.
Winbond 83627HF Super I/O.
ALC888 High-Defination Audio chip.
System Memory:
Two DDR2 DIMM 240pins Sockets support DDR2 667/800
unregistered non-ECC Memory up to 8.0 GB.
Dual channel mode operation supported.
Video Controller:
Intel Q35 Integrated GMA3100 Graphic Engine. Support
DVMT 4.0 for memory allocation up to 256MB.
One 15-Pins D-Sub Female connector on Rear plane for CRT
displays.
One 40-pins connector support Dual channel 24-bits LVDS
LCD display
One 20-pins connector support DVI interface.
Support Dual display CRT+LCD, CRT+DVI or DVI +LCD.
Super I/O:
Winbond 83627HF LPC I/F Super I/O chip.
Two Serial ports as COM1~COM2. COM2 is RS232/422/485
selectable by jumpers.
COM1~COM2 are pin-header for internal connections.
One Floppy connector supports up to floppy drives.
One Parallel port supports SPP/ECP/EPP mode.
One IrDA port.
One Mini-DIN connector on I/O bracket to support PS2
Keyboard and mouse.

PI-P5BVLL User`s Manual 5
USB Interface:
Six USB 2.0 ports compliant with USB Specification Rev. 2.0
and support USB Hot-Plug function.
Six ports are in three 2x5/2.54mm box header for internal
USB devices connection.
Support Legacy USB devices and Boot from USB devices like
USB-HDD, USB-Floppy and USB-CDROM.
All USB ports support USB type keyboard and mouse.
SATA and PIDE:
One PCI-E bridged PIDE controller support up to UltraDMA
mode 6 or ATA133 speed.
One standard 40-pins Box header to support 3.5” HDD, DVD
Player or DOM Flash Disk.
Six SATA ports support up to 6 SATA devices. Support RAID0,
RAID 1, RAID 5, and RAID10. SATA RAID BIOS is integrated in
System BIOS.
Gigabit and 10/100M Ethernet:
Two Realtek RT8111C chips on board for dual GbE LAN
support.
Support Wake-on-LAN.
Remote Boot Agent is supported with PXE or RTL protocol.
Audio:
RealTek ALC888 High-Definition Audio chip on-board.
One 10-pins pin-header supports Audio Line-out. Line-In
and Microphone.
One CD-IN to support DVD player audio input.
One SPDIF interface to support SPDIF digital audio input and
output.
PCI and ISA Slot:
PICMG 1.0 Compliant design supports standard PCI and ISA
bus through backplane.
Hardware Monitor:
83627HF integrated hardware monitor chip to monitor
Voltages, temperatures and FAN speed.
Temperature Monitor: One sensor close to CPU socket for
CPU temperature detection. One sensor close to 83627HF
chip for board temperature detection.
One CPU FAN for CPU cooler, one SYS FAN for chassis FAN.
All FAN speeds are monitored.

6 PI-P5BVLL User`s Manual
Watchdog Timer:
The WatchDog timer can be disable/enable through BIOS
setup.
The timeout interval 1~255 seconds can be programmed
through I/O address 842h/843h. The timeout event will
generate the RESET.
CMOS:
On-board RTC with 242 bytes of Battery-back CMOS RAM.
One 3-pins Jumper to clear CMOS data.
BIOS:
Phoenix-Award Standard PnP BIOS 6.2.
8Mbit FlashROM with BootBlock for Fail-safe.
Enhanced ACPI and DMI2.0 compliant.
BIOS utility for field update.
VBIOS and LAN remote Boot Agent integrated.
Power Connector:
Support both AT mode and ATX mode operation. Selectable
by jumper.
One Standard 4-pins power connector for standalone
operation.
One ATX-12V 4-pins connector for CPU power input.
Cooling:
One CPU cooling FAN connector nearby CPU socket.
One System cooling FAN connectors on board for Chassis or
PSU cooling.
Digital Input and Output::
Support 8-bits Digital I/O.
Software programmable to configure as 4-IN/4-OUT or 8-IN
or 8-OUT.
Others:
One Buzzer (9mm) on-board for beep message.
Operating Temperature:
0~60°C Operation Range.
-40C to 70C storage.
Relative Humility: 5~95%, non-condensing.
Dimensions:
13.3” (L) x 4.8” (W); or 338mm (L) x 124mm (W).
PICMG 1.0 Standard Form Factor.

PI-P5BVLL User`s Manual 7
Chapter 2
Jumper setting & Connectors
2.1 JUMPERS ON THE PI-P5BVLL.............................................................. 8
2.2 CONNECTORS ON THE PI-P5BVLL...................................................... 13

PI-P5BVLL User`s Manual 8
2.1 Jumpers on the PI-P5BVLL
The jumpers on the PI-P5BVLL allow you to configure your Single
Board Computer card according to the needs of your applications.
If you have doubts about the best jumper configuration for your
needs, contact your dealer or sales representative.
The following table lists the jumpers on PI-P5BVLL and their
respective functions.
Jumper Locations on the PI-P5BVLL................................................9
JP1: Clear CMOS RAM Data ..........................................................10
JP2, JP3, JP4: Front Side Bus Selection ..........................................11
AT_MODE: Power Supply Mode Selection ....................................11
COM2MODE: RS232/RS422/RS485 ..............................................12
LCDPWR: LCD PANEL Power Selection..........................................12

PI-P5BVLL User`s Manual 9
Jumper Locations on the PI-P5BVLL

10 PI-P5BVLL User`s Manual
JP1: Clear CMOS RAM Data
This 3-pin Jumper allows the user to disconnect the built-in 3V
battery power to clear the information stored in the CMOS RAM.
To clear the CMOS data:
(1) Turn off the system power.
(2) Remove Jumper cap from pin1&2.
(3) Short the pin2 and pin3 for three seconds.
(4) Put Jumper cap back to pin1 & 2.
(5) Turn on your computer.
(6) Hold Down <Delete> during boot up and enter BIOS setup to
enter your preferences.
Clear CMOS
Content
Normal Operation
(default)
1
1

PI-P5BVLL User`s Manual 11
JP2, JP3, JP4: Front Side Bus Selection
JP2 and JP3 and JP4 allow users to select the FSB speed. It can be 800
MHz, 1066 MHz or 1333 MHz.
User should select the correct FSB speed to make their CPU run on
correct speed and ensure the system runs stably.
JP2~JP4
Setting
Speed
1 1 1
JP4JP3 JP2
JP2: Pin 1-2 short
JP4: Pin 1-2 short
800Mhz FSB
(default)
1 1 1
JP4JP3 JP2
JP2: Pin 1-2 short
JP3: Pin 1-2 short
JP4: Pin 1-2 short
1066Mhz FSB
1 1 1
JP4 JP3 JP2
JP2: Pin 1-2 short
JP3: Pin 1-2 short
1333Mhz FSB
AT_MODE: Power Supply Mode Selection
AT mode
(default)
ATX mode
1
AT_MODE
1
AT_MODE

12 PI-P5BVLL User`s Manual
COM2MODE: RS232/RS422/RS485
COM2 support multi-protocols include RS232, RS422 and RS485.
The Protocols of COM2 can be set up through jumpers.
COM2MODE: COM2 Protocols selection.
The pin-out for each mode is illustrated on next chapter.
COM2MODE
I/F TYPE
17 1
18 2
RS-232
(default)
17 1
18 2
RS-422
17 1
18 2
RS-485
LCDPWR: LCD PANEL Power Selection
LCDPWR can be used to select the Panel LCD supple power: +3.3V or
+5V.The default setting is on +3.3V.User need to check the LCD panel
spec and adjust this jumper to make Panel work in specified power
rail. This Jumper serves LVDS LCD connector.
+5V
+3.3V(default)
1
1