WIN Enterprises PL-80910 User manual

1
teadpUetaDesaeleR.reV
2 Released0.51020.1
User Manual
PL-80910
3.5”Fanless Embedded System, 3.5” SBC Embedded Control Board
3.5”SBC with 2nd Gen. AMD® Embedded G-Series SOC, Steppe Eagle, with AMD
Radeon™ HD Graphics, DDR3 up to 8GB, 1 x Intel® GbE LAN, Onboard VGA, 24-bit
LVDS, HDMI, audio, SATA, USB3.0, 4 x COM, 8-bit GPIO, 2 x Mini-PCIe, LPC, DC 8V
~ 32V input

WIN Enterprises, Inc. PL-80910 User Manual
2
C pyright
Trademark
Limitati n f liability
The content of this document and software with this product are copyrighted by WIN
Enterprises, Inc.
This document contains proprietary information protected by copyright. All rights are
reserved; no part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable. The original
manufacturer assumes no responsibility for any inaccuracies that may be contained in
this manual. The original manufacturer reserves the right to make improvements to the
products described in this manual at any time without prior notice.
All other product names mentioned herein are used for identification purpose only and
may be trademarks and/or registered trademarks of their respective companies.
While reasonable efforts have been made to ensure the accuracy of this document,
the manufacturer and distributor assume no liability resulting from errors or omissions
in this document or from the use of the information contained herein.
For more information or other WIN Enterprises products visit our website:
http://www.win-ent.com.
For technical supports, please send your inquiry to c[email protected]m.

WIN Enterprises, Inc. PL-80910 User Manual
3
Packing list
Before use this product, please make sure that the following materials have been shipped.
1 x MB-80910 3.5” SBC
1 x CPU cooling Fan (* Note )
1 x SATA cable, L/ 200mm
1 x 12V/5V SATA power cable , L/ 150mm
1 x COM port, DB9 type, L/ 180mm, without bracket
1 x dual USB 2.0 cable, L/ 245mm, without bracket
1 x CD Utility
( P/N: CB-F0056-00 )
( P/N: CB-SATA11-00 )
( P/N: CB-IPOW41-00 )
( P/N: CB-ICOM34-01 )
( P/N: CB-IUSB03-00 )
Model Name Description
MB-8091A AMD® Embedded GX-212JC SOC (D/C 1.2 GHz), HDMI, VGA, LVDS,
GbE, COM, USB, SATA, Mini-PCIe, DC 8V ~ 32V input
MB-8091B AMD® Embedded GX-412HC SOC (Q/C 1.2 GHz), HDMI, VGA, LVDS,
GbE, COM, USB, SATA, Mini-PCIe, DC 8V ~ 32V input
MB-8091C AMD® Embedded GX-424CC SOC (Q/C 2.4 GHz), HDMI, VGA, LVDS,
GbE, COM, USB, SATA, Mini-PCIe, DC 8V ~ 32V input
CB-F0056-00 CB-SATA11-00 CB-IPOW41-00 CB-ICOM34-01 CB-IUSB03-00
Note: Customer needs to change high performance CPU cooling Fan when using MB-8091A.

WIN Enterprises, Inc. PL-80910 User Manual
4
* If any items are missing or damaged contact your sales representative or distributor.
Optional Accessories
Photo Model Name
P/N: CB-ICOM34-01
Single COM port, DB9 type, L/ 180mm, without bracket
P/N: CB-IUSB03-00
Dual USB cable, L/ 245mm, without bracket
P/N: CB-IAUD15-01
Line-out , Line-In , Mic-In audio cable, L/ 180mm, without
bracket
P/N: CB-F00077-00 ( 39L-ZMAA000024A to work with)
CPU cooling Fan for EM-6338A-Q24
P/N: 39L-ZMAA000024A
Bracket for CB-F00077-00 CPU cooling Fan

WIN Enterprises, Inc. PL-80910 User Manual
5
Safety Inf rmati n
Operati n Safety
To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected. If
possible, disconnect all power cables from the existing system before you add a
device.
Before connecting or removing signal cables from the motherboard ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These
devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using, contact
your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
Before installing the motherboard and adding devices to it carefully read all the
manuals that came with the package(s).
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage contact your dealer
immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any
area where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.

WIN Enterprises, Inc. PL-80910 User Manual
6
Contents
1.1 I NTRODUCTION ................................................................................................................................................................................... 8
1.2 S PECIFICATION OF BOARD ...................................................................................................................................................................... 9
1.3 B LOCK D IAGRAM ............................................................................................................................................................................... 11
1.4 B OARD AND S YSTEM L AYOUT / D IMENSIONS ........................................................................................................................................... 12
1.5 IO PORTS ......................................................................................................................................................................................... 15
2. HARDWARE INSTALLATION ...................................................................................................................................................... 17
2.1 T HE LOCATION OF ONBOARD CONNECTORS .............................................................................................................................................. 17
2.2 T HE LOCATION OF ONBOARD UMPERS ................................................................................................................................................... 19
2.3 T HE FUNCTION LIST OF ONBOARD UMPERS SETTING ................................................................................................................................. 20
2.3.1 : JP1 for AT/ATX mode select ................................................................................................................................................. 20
2.3.2 : JP2 for DDR3 voltage select ................................................................................................................................................ 21
2.3.3 : JP3 for Clear CMO ............................................................................................................................................................. 22
2.3.4 : JP4 for LVD panel backlight control mode select............................................................................................................... 23
2.3.5 : JP5 for LVD panel power level select ................................................................................................................................. 24
2.4 T HE PIN DEFINE OF ONBOARD PIN HEADER .............................................................................................................................................. 25
2.4.1 : CN1 for 3-pin Fan connector ............................................................................................................................................... 25
2.4.2 : CN2 for Full-size Mini-PCIe socket....................................................................................................................................... 26
2.4.3 : CN3 & CN4 for ATA 3.0 connector and ATA power connector.......................................................................................... 27
2.4.4 : CN5 for IM card socket...................................................................................................................................................... 28
2.4.5 : CN6 for U B2.0 port pin header.......................................................................................................................................... 29
2.4.6 : CN8 for Mbus pin header .................................................................................................................................................. 30
2.4.7 : CN9 for Low Pin Count pin header ...................................................................................................................................... 32
2.4.8 : CN10 for GPIO pin header................................................................................................................................................... 33
2.4.9 : CN11 for WLAN LED connector for Half-size Mini-PCIe socket ........................................................................................... 34
2.4.10 : CN13 for WLAN LED connector for Full-size Mini-PCIe socket .......................................................................................... 35
2.4.11 : CN14 for COM 2 , R 232/422/485 ..................................................................................................................................... 36
2.4.12 : CN15 for LVD panel backlight adjustment connector...................................................................................................... 37
2.4.13 : CN16 for LVD panel inverter power connector................................................................................................................ 38
2.4.14 : CN17 for COM 3 , R 232 ................................................................................................................................................... 39
2.4.15 : CN18 for LVD connector .................................................................................................................................................. 40

WIN Enterprises, Inc. PL-80910 User Manual
7
2.4.16 : CN19 for Audio pin header................................................................................................................................................ 41
2.4.17 : CN20 for front Panel pin header ....................................................................................................................................... 42
2.4.18 : CN21 for COM 1 , R 232 ................................................................................................................................................... 43
2.4.19 : CN25 for COM 3 , R 232 ................................................................................................................................................... 44
2.4.20 : CN30 for half-size Mini-PCIe socket .................................................................................................................................. 45
2.4.21 : CN31 for Battery connector .............................................................................................................................................. 46
3. BIOS SETTING MENU ............................................................................................................................................................... 47
3.1 M AIN M ENU .................................................................................................................................................................................... 48
3.2 A DVANCED M ENU ............................................................................................................................................................................. 49
3.2.1 PCI ubsystem ettings ......................................................................................................................................................... 50
3.2.2 ACPI ettings......................................................................................................................................................................... 52
3.2.3 Trsuted Computing ............................................................................................................................................................... 53
3.2.4 CPU Configuration ................................................................................................................................................................ 54
3.2.4.1 CPU Information ................................................................................................................................................................ 55
3.2.5 IDE Configuration.................................................................................................................................................................. 56
3.2.6 U B Configuration ................................................................................................................................................................ 57
3.2.7 Platform Function ................................................................................................................................................................. 58
3.2.8 F81866 uper IO Configuration............................................................................................................................................. 59
3.2.8.1 erial Port 0, 1, 2, 3 Configuration..................................................................................................................................... 60
3.2.9 F81866 H/W Monitor............................................................................................................................................................ 61
3.2.10 erial Port Console Redirection ........................................................................................................................................... 62
3.2.10.1 COM0, COM1 etting....................................................................................................................................................... 63
3.3 C HIPSET M ENU ................................................................................................................................................................................. 64
3.3.1 GFX Configuration................................................................................................................................................................. 65
3.3.2 outh Bridge ......................................................................................................................................................................... 66
3.3.2.1 B ATA Configuration ....................................................................................................................................................... 67
3.3.2.2 B U B Configuration......................................................................................................................................................... 68
3.3.3 North Bridge Configuration .................................................................................................................................................. 69
3.4 B OOT M ENU .................................................................................................................................................................................... 70
3.4.1 C M16 Parameters ............................................................................................................................................................... 71
3.5 S ECURITY M ENU ............................................................................................................................................................................... 72
3.6 S AVE & E XIT M ENU ........................................................................................................................................................................... 73
4. DESIGN RESOURCES(AWAIT UPDATE ....................................................................................................................................... 74
4.1 S YSTEM R ESOURCES ........................................................................................................................................................................... 74

WIN Enterprises, Inc. PL-80910 User Manual
8
General Information
1.1 Introduction
MB-80910 is a 3.5” SBC with onboard 2
nd
Gen. AMD® Embedded G-Series SOC, Steppe Eagle,
with AMD Radeon™ HD Graphics. Integrated graphics for three display options include HDMI, VGA
and 24-bit dual-channel LVDS. One DDR3 SO-DIMM supports a maximum of 8GB DDR3 1600 of
system memory.
There are two flexible Mini-PCIe sockets for expansion. One is the Full-size type and the other one is
Half-size type. Both of them support standard Mini-PCIe cards for PCIe & USB signal-base, such as
Wi-Fi. Besides that, A SIM card holder is included that can accept a SIM card when you install a
Full-size Mini-PCIe 3G module for wireless connection. The Half-size Mini-PCIe socket also supports a
mSATA SSD as a storage device.
Regarding I/O ports, MB-80910 provides plenty of connectivity, such as 1 x Intel® GbE Ethernet
provided by Intel® i211AT controller, 1 x RS232/422/485 & 3 x RS232, 6 x USB, Audio, 1 x SATA 6Gb/s,
1 x LPC pin-header that could support WIN’s TPM module if customer needs to better protect
information.MB-80910 can accept a wide electrical range: DC 8V ~ 32V input, an feature an external
DC locking power jack or a 4-pin internal power connector for easier power integration.
MB-80910 is a small form-factor embedded platform equip with AMD® high performance
Radeon™ HD Graphics and also rich IO ports, make MB-80910 suitable for a wide range of
applications in digital signage, POS, kiosks, and factory automation. Fanless design are allowed for
high temperature and dusty environments.
WIN offers reliable and solid products which are produced under Management System Standards:
ISO9001-2000 Certificate. The certificate keeps us focused on our quality objectives of management
and environmental production. Its willingness to customize standard products for meet unique customer
needs makes WIN different. All ODM projects are welcome. Years of experiences enables WIN to fulfill
the customer’s vision, by delivering products to exact specifications. WIN R&D team is proud of its
strong engineering background. R&D professionals account for 25% of the WIN workforce. We focus
on developing new products for both emerging and established markets. For more information about
OEM/ODM projects contact us :
Email: mailto:[e-mail] TEL: [phone].

WIN Enterprises, Inc. PL-80910 User Manual
9
1.2 MB-80910 Specifications
System
From Factor 3.5" SBC
CPU AMD Embedded GX-212JC SOC with AMD Radeon™ Graphics, 6W (MB-8091A)
AMD Embedded GX-412HC SOC with AMD Radeon™ Graphics, 7W (MB-8091B)
AMD Embedded GX-422CC SOC with AMD Radeon™ Graphics, 25W (MB-8091C)
Chipset Integrated
Memory 1 x DDR3 SO-DIMM / 1600 MHz up to 8GB, without ECC support
BIOS AMI SPI BIOS
SSD 1 x Half-size Mini-PCIe socket support mSATA
Watchdog timer 255 levels, 1 ~ 255 sec
Expansion 1 x Full-size Mini-PCIe socket w/SIM slot. With PCIe X1 & USB signal
1 x Half-size Mini-PCIe socket. With PCIe X1 / SATA signal & USB single
Board Size 146mm x 101mm
Operating Temp.
MB-80910Board : 0°C~60°C (32°F~140°F)
PL-80910 System : 0°C~40°C (32°F~104°F)
Storage Temp. -20°C~80°C (-4°F~176°F)
Operating Hum. 10%~90% (non-condensing)
Display
Chipset 2
nd
Gen. AMD Embedded G-series SOC integrated
Display interface
1 x external VGA
1 x external HDMI 1.4a w/ lockable connector
1 x internal 18/24-bit Dual Channel LVDS
I/O
Series Port Internal : 1 x RS232/422/485 ( COM2 ), 3 x RS232 ( COM 1/3/4 )
SATA 1 x SATAIII-600MB/s
USB
External : 2 x USB3.0 ( compatible with USB 2.0 )
Internal : 4 x USB2.0
Ethernet External : 1 x Intel I211AT Gigabit Ethernet

WIN Enterprises, Inc. PL-80910 User Manual
10
Audio External : 1 x Line-
out
Internal : Line-in/out , Mic-in
Digital I/O 8-bit GPIO interface
LPC 1 x LPC header for Optional TPM module
Others 1 x 3-pin PWM Fan header
1 x Front Panel header for power on/off, reset, HDD/power LED indicator
1 x 2-pin header for battery, 1 x 4-pin 12V/5V DC out for SATA HDD
1 x LVDS Backlight/inverter pin-
header, LVDS voltage select.
2 x 2-pin for Full-size/Half-size Mini-PCIe LED indicator header
Power
Power in DC 8V - 32V input ( AT/ATX mode jumper selectable )
Power connector
1 x external DC Jack connector with lockable (Optional for P4 4-pin internal header)
Note: All specifications and photos are subject to change without notice.

WIN Enterprises, Inc. PL-80910 User Manual
11
1.3 Block Diagram
24-bit Dual-ch LVDS
DP1
1 x D 15 VGA
PCIe
1 x Intel i211AT
Full-Size Mini-PCIe socket
w/ SIM holder
US 2.0
4 x Internal US 2.0
Half-size
Mini-PCIe
1 x SATAIII
SATA0
SATA1
2 x External US 3.0/2.0
US 3.0
IOS
SPI
Audio
HDA
CH7511
Switch
PCIe
PCIe
2.4G / QC , 25W
1.2G / QC , 7W
1.2G / DC , 6W
HDMI 1.4a
LPC header
F81866A
3 x RS232
F81438
1 x RS232/422/485
8-bit GPIO
WDT, H/W Monitor
VGA
1 x DDR3 1600 MHZ
SO-DIMM0, w/o ECC
1 channel
DC 8V ~ 32V input
( AT/ATX mode )
DP0

WIN Enterprises, Inc. PL-80910 User Manual
12
1.4 Board and System Layout Dimensions

WIN Enterprises, Inc. PL-80910 User Manual
13

WIN Enterprises, Inc. PL-80910 User Manual
14

WIN Enterprises, Inc. PL-80910 User Manual
15
1.5 IO ports
DDR3 SO-DIMM
VGA DC Jack input
Fan connector
24-bit LVDS
Mini-PCIe
2
nd
Gen. AMD®
Embedded
G-series SOC
HDMI
US 3.0 GLAN
Line-out
LVDS inverter
Mini-PCIe SATA
SATA power
4 x US 2.0
GPIO
4 x COM
Low Pin Count
LVDS backlight
SMbus
WLAN LED
SIM socket
Front Panel
Audio pin header

WIN Enterprises, Inc. PL-80910 User Manual
16
Line-Out
Gigabit Ethernet VGA
Dual US 3.0 HDMI with lockable
DC input with Lockable

WIN Enterprises, Inc. PL-80910 User Manual
17
2. Hardware installation
2.1 Location of onboard connectors
CN28
SO-DIMM
CN10
CN3
CN1
CN2
CN24
CN22
CN7
CN19
CN18
CN9
CN14
CN17
CN25
CN21
CN27
CN6
CN16
CN23
CN29 CN26
CN4
CN20
CN5
CN15
CN13
CN11
CN8

WIN Enterprises, Inc. PL-80910 User Manual
18
Label Function
CN1 3-pin Fan connector
CN2 Full-size Mini-PCIe socket
CN3 SATA connector
CN4 SATA power connector
CN5 SIM card socket
CN6 USB2.0 port 4/5 pin header
CN7 USB2.0 port 2/3 pin header
CN8 5-pin SMbus pin header
CN9 Low Pin Count pin header
CN10 GPIO pin header
CN11 WLAN LED connector for Half-size
CN12 N/A
CN13 WLAN LED connector for Full-size
CN14 COM2 / RS232/422/485 Pin header
CN15 LVDS backlight adjustment connector
CN16 LVDS inverter connector
Label Function
CN17 COM4 / RS232 Pin header
CN18 24-bit LVDS connector
CN19 Audio pin header
CN20 Front panel Pin header
CN21 COM1 / RS232 Pin header
CN22 Dual USB3.0 connector
CN23 P4 4-pin power connector ( Optional )
CN24 RJ45 LAN connector
CN25 COM3 / RS232 Pin header
CN26 HDMI connector
CN27 Line-out connector
CN28 VGA connector
CN29 DC Jack power input connector
CN30 Half-size Mini-PCIe socket
CN31 Battery connector
N/A
CN30

WIN Enterprises, Inc. PL-80910 User Manual
19
2.2 The location of onboard jumpers
Label Function
JP1 AT/ATX mode select
( 1-2 short : *AT mode , 2-3 short : ATX mode )
JP2 DDR3 Voltage Select
( 1-2 short : *1.5V , 2-3 short : 1.35V )
JP3 Clear CMOS
( 1-2 short : *Normal , 2-3 short : Clear CMOS )
JP4 LVDS Panel backlight control mode select
( 1-2 short : PWM mode , *2-3 short : DC mode )
JP5 LVDS Panel power level select
( 1-2 short : *3.3V , 3-4 short : 5V , 5-6 short : 12V )
* Default setting
JP5
JP2
JP3
JP5
JP4
JP1

WIN Enterprises, Inc. PL-80910 User Manual
20
2.3 The function list for onboard jumpers settings
2.3.1 : JP1 for AT/ATX mode select
JP1 : 1 x 3 header , pitch 2.0 mm
Closed Pin Result
1-2 * AT mode
2-3 ATX mode
* Default setting
3
1
JP1