Aaeon EPIC-BT07 User manual

EPIC Board EPIC- B T07
EPIC-BT07
Onboard Intel®Atom™/Celeron®
Processor SoC
DDR3L 1333 SODIMM
HDMI, VGA, LVDS, DP
5 USB 2.0, 1 USB 3.0, 6 COM
1 SATA, 1 mSATA/MiniCard
EPIC-BT07 Rev. A Manual 1st Ed.
August 5, 2015

EPIC Board EPIC-BT07
Copyright Notice
This document is copyrighted, 2015. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
i

EPIC Board EPIC-BT07
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
AMD®is trademark of Advanced Micro Devices.
Microsoft Windows®is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other product names or trademarks are properties of their
respective owners.
ii

EPIC Board EPIC-BT07
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
•DVD-ROM for manual (in PDF format) and drivers
•EPIC-BT07
If any of these items are missing or damaged, please contact your
distributor or sales representative immediately.
iii

EPIC Board EPIC-BT07
China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
×
○
○
○
○
○
外部信号
连接器及线材
×
○
○
○
○
○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006
标准规定的限量要求以下。
X
：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006
标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。
iv

EPIC Board EPIC-BT07
China RoHS Requirements
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components X O O O O O○
Wires &
Connectors
for External
Connections
X O O O O O
O
：
The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: T
he quantity of poisonous or hazardous substances or elements found in at least one
of the component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is
applicable under normal usage only
v

EPIC Board EPIC-BT07
Contents
Chapter 1 General Information
1.1 Introduction....................................................................1-2
1.2 Features ........................................................................1-3
1.3 Specifications ................................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions........................................................2-2
2.2 Mechanical Drawing......................................................2-3
2.3 Jumpers and Connectors..............................................2-5
2.4 Block Diagram...............................................................2-7
2.5 Setting Jumpers ............................................................2-8
2.6 List of Jumpers..............................................................2-9
2.6.1 Auto Power Button Selection (CN3) ..................2-10
2.6.2 PCI-104 VI/O Voltage Selection (CN4)..............2-10
2.6.3 CMOS RTC Setting (CN5).................................2-10
2.6.4 LVDS/eDP Backlight Voltage Selection (CN17)2-10
2.6.5 LVDS/eDP Backlight Control Selection (CN18).2-11
2.6.6 Touch Screen 4/5/8-wire Mode Selection (CN28)
....................................................................................2-11
2.6.7 COM2 RI/+5/+12V Selection (CN34).................2-11
2.6.8 COM2 RI/+5/+12V Selection (CN36).................2-11
2.6.9 LVDS/eDP Operating Voltage Selection (CN41)
....................................................................................2-12
vi

EPIC Board EPIC-BT07
2.7 List of Connectors .......................................................2-13
2.7.1 Stereo Audio Right Channel (CN1) ...................2-15
2.7.2 RTC Battery Connector (CN2)...........................2-15
2.7.3 4-Pin Power-In Connector (CN3).......................2-15
2.7.4 Stereo Audio Left Channel (CN7)......................2-16
2.7.5 2-Pin Power-In Connector (CN8).......................2-16
2.7.6 PCI-104 Connector (CN9) .................................2-16
2.7.7 Audio Connector (CN10) ...................................2-18
2.7.8 LPT/Digital I/O Connector (CN12).....................2-19
2.7.9 USB 2.0 Port 2 (CN13)......................................2-21
2.7.10 USB 2.0 Port 3 (CN14)....................................2-22
2.7.11 USB 2.0 Port 5 (CN15)....................................2-22
2.7.12 USB 2.0 Port 4 (CN16)....................................2-23
2.7.13 LVDS/eDP Inverter/ Backlight Connector (CN19)
....................................................................................2-23
2.7.14 MicroSD Card Connector (CN20)....................2-24
2.7.15 LCP Expansion Connector (CN21)..................2-24
2.7.16 UIM Socket (CN22)..........................................2-25
2.7.17 +5V Output for SATA HDD (CN23) .................2-26
2.7.18 SATA Port 1 (CN25) ........................................2-26
2.7.19 MiniCard Slot (CN26).......................................2-27
2.7.20 MiniCard/ mSATA Slot (CN27)........................2-29
2.7.21 Touchscreen Connector (CN29)......................2-32
2.7.22 PS/@ Keyboard Mouse Connector (CN30).....2-35
2.7.23 COM Port 6 (CN31).........................................2-35
vii

EPIC Board EPIC-BT07
2.7.24 COM Port 5 (CN32).........................................2-36
2.7.25 SPI Programming Port (CN33)........................2-37
2.7.26 LVDS Port 1/ eDP (CN35)...............................2-37
2.7.27 COM Port 4 (CN37).........................................2-41
2.7.28 COM Port 3 (CN38).........................................2-42
2.7.29 Front Panel Connector (CN39)........................2-45
2.7.30 10M/100M/1G Ethernet Port 1 (CN44)............2-45
2.7.31 10M/100M/1G Ethernet Port 2 (CN45)............2-46
2.7.32 USB Port 0 & 1 (CN47)....................................2-47
2.7.33 DP Port (CN48)................................................2-48
2.7.34 COM Port 1 & 2 (CN49)...................................2-49
2.7.35 HDMI Port (CN50) ...........................................2-51
2.7.36 VGA Port (CN51).............................................2-53
2.7.37 SMBus Connector (CN52)...............................2-54
2.7.38 DDR3L SODIMM (DIMM1)..............................2-54
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. ......................................3-2
3.2 AMI BIOS Setup............................................................3-3
Chapter 4 Driver Installation
4.1 Installation .....................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Watchdog Timer Initial Program ...............................A-2
Appendix B I/O Information
viii

EPIC Board EPIC-BT07
B.1 I/O Address Map.......................................................B-2
B.2 Memory Address Map...............................................B-4
B.3 IRQ Mapping Chart...................................................B-5
Appendix C Mating Connectors
C.1 List of Mating Connectors and Cables......................C-2
Appendix D Electrical Specifications for I/O Ports
D.1 Electrical Specifications for I/O Ports .......................D-2
Appendix E Digital I/O Ports
E.1 Digital I/O Programming............................................E-2
E.2 Digital I/O Register....................................................E-3
E.3 Digital I/O Sample Program......................................E-5
ix