E-TRENDS FLY User manual
How to:
Unbox and
Assemble
fly
Welcome to your new E-Trends Fly Electric
Bike. Let’s get started.
Carefully unpack the components and remove all of the transit packaging.
Take your time to read the manual and keep it for future reference.
You should have all the parts you see here.
Fold out the frame and secure with the clamp as shown here.
Insert the steering stem into the head tube making sure the tapered nut is on
the end of the bolt.
Straighten handlebars and tighten bolt with the tool supplied.
Fold up the handlebars and secure with the clamp.
Attach the pedals, noting that these are left and right-handed. These must be
fitted on the correct side. Fasten the pedals securely with the spanner
provided.
Remove the keys from the seat clamp.
Insert the seat post, adjust the height and secure it. Make sure the clamp is
tight.
Adjust the height of the handlebars. Secure them with the clamp.
Use the hand-pump supplied to inflate front and rear tyres. Attach the hose
to the tyre valve as shown. Inflate until each tyre is very firm to press.
How to:
Charge
fly
Here’s how to charge your Fly e-bike
battery.
With the battery turned off insert the socket into the battery and plug into the
mains.
Charge time is approximately 4-5 hours.
The battery can also be charged without being in the bike.
Press the button to see how much the battery is charged. This row of lights
indicates the charge level.
The battery should be charged up at least every 3 months to ensure it works
correctly, even if the e-bike has not been used.
fly
How to:
Ride your e-
bike
fly
You are ready to ride your Fly e-bike!
Insert and turn the key to switch on.
Press buttons to turn on lights on & off and operate the horn.
Use the twist grip to provide up to 3.75 miles or 6km/hr assistance, either
when walking alongside the bike or when starting off.
Otherwise, pedal to start the bike. Power assistance is provided for speeds
up to 15.5mph or 25kmh.
Other E-TRENDS Scooter manuals
