Eachine TXC23 VTX User manual

EACHINE TXC23 VTX
Product specifications
Model:EACHINE TXC23 VTX
Input voltage:DC 6-36V
Output voltage:5V/1A
12V/PIT@30mA
12V/25mW@140mA/16dBm
12V/200mW@1 90mA/24.5dBm
12V/600mW@280mA/28dBm
12V/800mW@330mA/30dBm
Antenna interface:MMCX
Output power:PIT / 25mW / 200mW / 600mW / 800mW switchable
Frequency:5.8GHz 6 bands, 48 channels
Size:VTX（28mm x 28mm x 1.6mm）
Externai Expansion Board（36mm x 36mm x 1.6mm）
Product dimensions:
2

4
1. Make sure the antenna is already installed at output before
powering up, to avoid damaging the internal components.
2. Please note that the input voltage is within the specified range
and wiring is correct, to avoid damaging the internal components.
3. Under high-power work, the temperature of VTX surface is high.
No touching to avoid burning your fingers.
EACHINE TXC23 VTX

Power button settings:
1. Click the button to switch power. The power of this VTX is switched and
cycled in the order of PIT→25mw→200mw→600mw→800mw.
2. Press and hold the button for more than 2 seconds to switch directly to PIT
from the current transmit power;
CH/FR button settings:
1. Click the button to switch channels, and the channel switches and cycles in
the order of CH1, CH2, CH3...CH8 on the basis of the current channel;
2. Press and hold the button for over 2 seconds , and the band switches and
cycles in the order of A→B→E→F→R→L on the basis of the current band;
3
EACHINE TXC23 VTX
A
r
F
E
b
L

8
EACHINE TXC23 VTX
1