Eaget FU60 User manual

User Manual for Eaget FU60
Fingerprint Encryption USB 3.0 Flash
Drive

Specifications
- Interface: USB 3.0
- Capacity: 32GB
- System compatibility: Windows 10/8/7/Vista/XP; Linux; macOS
- Size: 63,2 x 20,2 x 8,6mm
- Weight: 20g
- Chip: ICE
Fingerprint Management Application
When using FU60 for the first time, please run a built-in application that
comes with it on your computer. This application is designed to set passwords and
enroll fingerprints, manage users whose accounts are registered, and prevent your
data from getting hacked and misused.
To run the fingerprint management application on your computer:
a) Plug the FU60 into an available USB port on your computer, and the device
should be recognized automatically.
b) Click “CD Drive(G): EAGET” in the window of “My computer”.
c) Double click the app icon “Finger Tool_EAGET.exe” to run the application.
Note：Some security software may misunderstand and forbid the operation;
please set to allow the operation.
Registration for Administrators
Only when the registration of the administrator’s account is complete you can
create accounts and enroll fingerprints for general users. To do so, please follow the
instructions below:
1) To set a password for the administrator tap on Register, enter the
Administrator password twice, and tap Next.

2) To enroll fingerprint for administrator tap Next, and enroll your fingerprint
according to the direction. You can enroll again if you want by tapping the
Re-entry at the bottom.
Note: We suggest you slightly change the angle of your finger for every
attempt, allowing the system to store fingerprints of the pad, both sides, and the tip
of your finger. Repeat step for 6 times until the scan of your fingerprint is completed
Usage of the Fingerprint Flash Drive
Attach FU60 to an available USB port on your computer and the device
should be recognized automatically. Place your finger (the one that had been
enrolled) on the fingerprint sensor with light and even pressure. You will see the blue
light flashes. When the fingerprint is authenticated, you can see the secure partition
and access the data stored in this partition.

Partition of the Flash Drive
a) Run the application “Fingertool_EAGET”, and apply the Administrator’s
fingerprint to pass the authentication
b) Click “PARTITION”
c) Scroll the mouse to adjust the capacity of the public partition and the secure
partition, and click “YES” to confirm the adjustment.
d) Please re-attach the flash drive after finish the partition.
Managing administrators and users’ accounts and passwords
Tap + to add the fingerprint. If you want to change the password and the
fingerprint after selecting the target account, tap the Edit button. To delete the
account, tap the basket icon. Bear in mind that you should keep at least one
fingerprint as the administrator.

a) Click “Password Authentication” on the window of fingerprint authentication.
b) Click“Forget Password” on the window of the password authentication.
c) Enter a new password.
d) Click“YES” and apply the administrator’s fingerprint to complete the setting.