
AUX IN
1. The speaker has a "LINE IN" jack (3.5 mm AUX jack) for
connecting non-Bluetooth devices.
2. One end of the cable is plugged into the "LINE IN" jack, and the
other end is connected to the audio output port of the device, such
as a computer, mobile phone and amplifier.
3. The speaker will automatically switch to LINE IN mode.
Alternatively, you can switch to the LINE IN mode by pressing the
"MODE" button. .
MIC IN
1. The speaker has a "MIC IN" jack (6.35mm AUX jack) for a
second microphone.
2. If connected to a wired microphone, simply connect via the "MIC
IN" jack.
3. If connected to a wireless microphone, simply connect the
wireless receiver via the "MIC IN" jack.
4. Please note that the frequency of the wireless microphone cannot
be 261.8MHz, otherwise it will interfere with the original
microphone.
5. The original microphone requires 2 AA batteries (not included).
USB
1. Insert a USB flash drive and the speaker will automatically play
existing music. The display shows "U / TF" in the upper left corner.