Earth BRICK E.BR.01 Instruction manual

BRICK Quick User Guide

EARTH Lighting meets all the requirements of standard EN 60598-2-13 regarding vehicle
and pedestrian use and are therefore ideal for lighting all the areas provided for by the
regulations, such as car, parks, pedestrian zones and other designated areas.
No Cabling.
No connection to
electricity source required.
Minimum maintenance
requirements.
Zero Co2 emmissions.Independent and
self-sufcient light source.
Smart energy
management.
Long lasting product.
Manufactured with top
quality materials.
Why using BRICK Solar lamp?
Product features
BRICK
General Dimensions
Hi efciency
Solar Panel
100mm
200mm
High quality anodized
aluminum body
Hi efciency
LED light
Low iron temperated
glass
38mm

Drainage base
Drainage
holes
100mm
22mm
200mm
Lamp elements
Drainage base
(Included)
Connect the lamp and the drainage base, by screwing together
BRICK
LED solar lamp

Installation in exible pavings Installation in exible pavings
In existing pavings, extract the
selected paving block.
Draining sublayer ( ex. sand )
Connect the lamp and the
drainage base by screwing
together. ( screws are included
in the packaging ).
2
1
Insert the lamp using the
suction cup, in order to hold
the product correctly and avoid
possible damages.
Once the lamp is correctly
located in the pavement, the
protective plastic lm can be
removed from the glass surface.
4
3

Insert the lamp using the
suction cup, in order to hold
the product correctly and avoid
possible damages.
Once the lamp is installed,
remove the protective plastic
lm from the glass surface.
4
3
Installation in solid pavings Installation in solid pavings
Reserve the space in the
ground in which BRICK Solar
lamp will be installed
at least: 100x200mm
Depth:6cm
Drainage tube (Not provided)
1
Connect the lamp and the
drainage base by screwing
together. ( screws are included
in the packaging ).
2

General Analisis
Functions and efciency
For maximum efciency we recommend you to Install BRICK solar lamp where it can get
direct sunshine, free from cover or shade.
BRICK Solar lamp can
work more than 3 days
without a favorable
weather when fully
charged
Automatic Operation
Photovoltaic-photosensitive
Solar Panel.
Light Temperature:
3.500 Kelvin (warm white)
4.500 Kelvin (light yellow)
Turn ON the lamp
Once the lamp is in contact with
light is activated and automatically
turns on in the night.

Long lasting product.
Manufactured with top
quality materials.
Product specications
Model No E.BR.01
Material and Colour
Weight
Dark grey Anodized Aluminum and glass
0.950 Kg
LiFe PO4
Every 5 years
1 X 1.500mAh, 3.2V
15kN
< 30 ºC
Vesta S.r.l
Battery type
Battery replacement
Battery capacity
Max. static load
Max. Temp
Manufacturer
Min. charging time
Duration
Aprox. 4 to 6 hours
Aprox. 13 hours
100mm x 200mm x 60mm (with Drainage base)
1 Watt
Dimensions
Solar panel output
LED power 0.08 watt
10m
Lighting colour 3.500 K ( warm white ), 4.500 K ( light yellow )
Battery Oper. Temp -20°C ~ 80°C
Lamp spacing
We recommend you to install the lamp with a
distance from each other of approximately: 1.10 mts.
Other compositions
The lamp could also be installed in pairs or
groups, in order to have a stronger and more
focused light.

Art direction and Graphic design by Mandalaki
Product’s architectural aspect coordination by Background and OLA
BRICK model produced by Earth lighitng Limited. All intellectual property rights and
copyrights are reserved. Nothing contained in this brochure may be reproduced without
written permission. All rights reserved. Made in Italy.
Designed, developed and engineered by Mandalaki
This document was printed from recycled FSC-certied paper.
MADE IN ITALY
If your solar charged lamp does not come on at dusk despite the observance of all the
instructions please try the following steps:
Trouble shooting
Make sure that the lamp is not being affected by any other light source.
Ensure the lamp does not stand in the shade during the day.
Check that the battery is installed correctly.
1.
2.
3.
Clear the solar module regularly with a damp towel to guarantee optimum performance of the
solar panel.
Maintenance
This product must be installed by qualied personnel in paving installations. Earth lighitng is
not responsable if its xtures are not installed according to local safety standards.
Important
Electronic devices do not belong to your household waste. Compilant with European
Guideline 2002/96/EG for electric and electronic devices, used electronic devices must be
collected separately and taken in for environmentally sound re-cycling. Options for disposing
of used devices may be obtained from your township, city or municipal government.
Incorrect disposal of batteries can harm the environment!
Batteries can contain poisonous heavy metals and are subject to treatment as hazardous
wastes. Take your used batteries to a municipal collection site.
Battery to be replaced by experienced personnel only.
The light source of the luminaire is not replaceable. When the light source reaches its end of
life the whole luminaire shall be replaced.
Disposal

www.earthsolarsolution.com