EarthQuake M5 Supplement

www.earthquakesound.com
The Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the specifications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545 • Phone: [phone] Fax: [phone]
The Sound That Will Move You.
MC5
5” MATCHED COMPONENT SET
2-WAY 5” COAXIAL SPEAKER
M5
Owner’s Manual & Warranty
EARTHQUAKE MARINE SPEAKERS
6” MATCHED COMPONENT SET
2-WAY 6” COAXIAL SPEAKER
M6
MC6

Five (5) year limited warranty:
Earthquake warrants the original purchaser that all Factory Sealed New Audio Products be free from defects in
material and workmanship under normal and proper use for a period of five (5) years from the date of purchase (as shown on
the original bill of sale with serial number affixed/written on it). The five (5) year warranty period is valid only if an authorized
Earthquakedealerproperlyinstallsthe productand thewarranty registrationcardis properlyfilled outand senttoEarthquake
SoundCorporation.Ifanon-authorizedpartyinstalls theproductaninety(90)daywarrantyperiodwillbeapplied.
(A) Five (5) years limited warranty plan coverage guidelines:
• First year: Earthquake pays for labor, parts, and return ground freight (only in US mainland, not including Alaska and
Hawaii).
• Second year: Earthquake pays for labor and parts only, customer must pay freight both ways.
• Third, fourth & fifth year: Earthquake pays for labor only. Customer must pay for parts and freight both ways.
(B) Warning:
Products (sent for repair) that are tested by Earthquake technicians and deemed to have no problem(s) will not be
covered by the five (5) year limited warranty. Customer will be charged a minimum of one (1) hour of labor (ongoing rates)
plusshippingchargesbacktocustomer.
(C) Earthquake will repair or replace - at our option - all defective products/parts subject to the following
provisions:
• Defective products/parts have not been altered or repaired by other than an Earthquake factory approved technician.
• Products/parts are not subjected to negligence, misuse, improper use, or accident, damaged by improper line voltage,
used with incompatible products, or have its serial number or any part of it altered, defaced or removed, or have been
used in any way that is contrary to Earthquake's written instructions.
(D) Warranty Limitations:
Warranty does not cover products that have been modified or abused. Including but not limited to the following:
• Damages to speaker cabinet and cabinet finish due to misuse, abuse, or use of improper use of cleaning
materials/methods.
• Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & dust cap, burnt speaker voice coil.
• Fading, deterioration of speaker components & finish due to improper exposure to elements.
• Bent amplifier casing, damaged finish on the casing due to abuse, misuse, or improper use of cleaning material.
• Burnt traces on PCB.
• Product/part damaged due to poor packaging or abusive shipping conditions.
• Subsequent damage to other products.
warranty claim will not be valid if the warranty registration card is not properly filled out & returned to
Earthquake with a copy of the sales invoice.
A
(E) Service Request:
To receive product/s service, contact Earthquake's service department at [phone] and request an RMA
number(Return MaterialAuthorization);itemsshipped withouta validRMAnumber willberefused. Makesure youprovide us
with your complete/correct shipping address, a valid phone number, and a brief description of the problem you are
experiencing with the product. In most cases, our technicians might be able to resolve the problem over the phone, thus
eliminatingtheneedtoshiptheproduct.
(F) Shipping Instructions:
Product/s must be packaged in its original protective box(s) to minimize transport damage. Shipping claims
regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse
any products improperly packed. Original bill of sale must accompany product returned for service. We encourage you to
include with the package a written description of the problem. Ship product to: Earthquake Sound Corp. 2727 Mc Cone
Avenue, Hayward, CA 94545. Ph [phone]. You are responsible for the cost of shipping the product to Earthquake
SoundCorporation.
(G) Disputes Resolution:
All disputes - between clients and Earthquake Sound Corporation - resulting from the five (5) years limited
warrantypolicymustberesolvedaccordingto thelaws&regulationsofthecountyofAlameda-California.
Page# 3……Warranty guidelines
Page# 4……Components set dimensions
Page# 5……Coaxial dimensions / Coaxial and component specs
Page# 6 & 7……Instalation
Table of Content
EARTHQUAKE SOUND
2EARTHQUAKE SOUND • 5-YEAR WARRANTY 3
Thank you for choosing Earthquake Sound’s line of Earthquake Marine coaxial and component sets for superior
enhancement of your water craft audio system. With proper installation and responsible listening, your marine speakers will
giveyouyearsofnearperfectsound reproduction.
We strongly recommend you to have your new marine speakers installed by an authorized Earthquake Sound dealer:
Installation professionals employed by your dealer have the correct tools and knowledge to install your speakers neatly and
successfully. Also, when your new products are installed by an authorized dealer, your product will include a FIVE YEAR
LIMITED WARRANTY. If you choose to perform your own installation, your warranty will be subject to limitations. Dealer
policies on handling warranty requests may vary from one dealer to the next. Please read the warranty information in its
entiretyandusegoodjudgmentwhenmaking thesevitaldecisions.
Please keep this warranty information in your files for
future reference if necessary. It is recommended that
you stick your serial number here for future reference. SERIAL NUMBER
High-Performance, Protection and Sound Quality

All specifications are subject to change without notice. EARTHQUAKE SOUND
4EARTHQUAKE SOUND • MARINE COMPONENT & COAXIAL SPECIFICATIONS 5
MC, Tweeter Dimensions
Trim Ring Diameter
A
Cut Out Hole Diameter B
2.15", 54.7mm
1.79”, 45.6mm
This diagram displays only the raw tweeter.
Mounting components vary in size.
Total Depth
C
Mounting Depth D
.925", 23.5mm
.71”, 18.2tmm
A
CD
A
B
MC Crossover Dimensions
Height
A
Width a
B
.97" • 24.7mm
1.64" • 41.8mm
This diagram displays only the crossover.
Mounting components vary in size.
Width
B
Depth D
2.08" • 53mm
.94" • 24mm
A
C
MC5 WOOFER DIMENSIONS
Grille tray outer
diameter
A166.5mm • 6.55”
Mounting depth
C
Magnet width
D
Cut out hole
E
Grille protrusion
B
61mm • 2.40”
20mm • .78”
129.0mm • 5.07”
87mm • 3.42”
+ 20mm • .78” for x-over
a Magnet width
D+ crossover
E
A
Da
D
C
B
MC6 WOOFER DIMENSIONS
Grille tray outer
diameter
A190.5mm • 7.5”
Mounting depth
C
Magnet width
D
Cut out hole
E
Grille protrusion
B
59mm • 2.32”
29.5mm • 1.16”
147mm • 5.78”
90mm •3.54 ”
+ 20mm • .78” for x-over
a Magnet width
D+ crossover
E
A
Da
D
C
B
M5 COAXIAL DIMENSIONS
Grille tray outer
diameter
A165.5mm • 6.51”
Mounting depth
C
Magnet width
D
Cut out hole
E
Grille protrusion
B
62mm • 2.44”
21mm • .82”
130.0mm • 5.11”
87mm • 3.42”
M6 COAXIAL DIMENSIONS
Grille tray outer
diameter
A190.2mm • 7.48 ”
Mounting depth
C
Cut out hole
E
Grille protrusion
B
59mm • 2.32”
26mm • 1.02”
147mm • 5.78”
Magnet width
D90mm • 3.54”
A
B
C
D
E
A
B
C
D
E
MARINE MATCHED COMPONENT SPECIFICATIONS
Tweeter
Crossover Networks
Woofer
Nominal Impedance 4 ohm 4 ohm
Sensitivity 89 dB @ 1W/1M 89 dB @ 1W/1M
• 2-way network
• Completely sealed
• 20mm • .78" PEI dome
• 5” UV treated poly injection cone body
• 25mm (over 1”) ASV voice coil
• Butyl rubber surround
75 watts RMS • 145 watts max
MC5 (2-way)
Model • 6.5” UV treated poly injection cone body
• 30mm (almost 1.25”) ASV voice coil
• Butyl rubber surround
• 20mm • .78" PEI dome
• 2-way network
• Completely sealed
85 watts RMS • 165 watts max
MC6 (2-way)
Rec. Amp power 50Hz-22kHz 45Hz-22kHz
Frequency Response
MARINE COAXIAL SPECIFICATIONS
Woofer
Model
Tweeter
Frequency Response
Nominal Impedance
M5 (2-way)
• 5” UV treated poly injection cone body
• Sealed motor structure
• 25mm (over 1”) VC
• Butyl rubber surround
• 20mm • .78" mylar dome
65Hz - 20kHz (±3dB)
89 dB @ 1W/1M
50-130 Watts RMS
4 ohm
M6 (2-way)
• 6” UV treated poly injection cone body
• Sealed motor structure
• 25mm (over 1”) VC
• Butyl rubber surround
• 20mm • .78" mylar dome
55Hz to 20kHz (±3dB)
90 dB @ 1W/1M
60-180 Watts RMS
4 ohm
B
BaB
Sensitivity
Rec. Amp power

All specifications are subject to change without notice. EARTHQUAKE SOUND
6EARTHQUAKE SOUND • INSTALLATION
CROSSOVER
TWEETER
WOOFER
7
GRILLE 4 S H E E T M E TA L
SCREWS PER SPEAKER GRILLE TRAY
CUSTOM SPEAKER INSTALLATION
4 S H E E T M E T A L
SCREWS PER SPEAKER SPEAKER
FACTORY REPLACEMENT INSTALLATION
MOUNTING CLIPSFACTORY CUTOUT
NOTE:
Hand tighten the screws
in a crisscross pattern to
avoid bending the speaker
basket or stripping screws.
INSTALLATION APPLIES
TO BOTH COMPONENT
AND COAXIAL SPEAKERS
NOTE:
INSTALLATION APPLIES
TO BOTH COMPONENT
AND COAXIAL SPEAKERS
NOTE:
SURFACE MOUNT FLUSH MOUNT COMPLETE ASSEMBLY
Push assembled tweeter through cut out hole
Cut diameter: EQM-T=2.15” (54.7mm)
Twist on nut
until the
tweeter is
secured
Fasten the panel
clamp down from
behind the panel.
Panel
Panel Clamp
Cup Mount
First pre-wire
your water craft
if not using stock
p l a c e m e n t .
Mount cup in
desired place.
T h e n p u s h
tweeter inside
cup until you
hear the snap.
This indicates
a secure fit.
COMPONENT SET WIRING DIAGRAM
AMPLIFIER