EARTO K960 User manual

Note: Please note that our keyboard must be charged with
your ipad Pro 11 inch charging cable.
iPad Keyboard Case
USER GUIDE
360 °Rotate
180 °
180 °Flip
K960
Email：[email protected]

Congratulations! Thank you for choosing our iPad 11 inch keyboard case.
Before using it, please read this manual.
1. iPad 11 inch Keyboard Case
2. User Manual
iPad Pro 11 inch Keyboard case 2018 (Model Number: A1980 /A2013/ A1934/A1979)
New iPad Pro 11" 2020 2nd Generation (Model NO.A2068/A2228/A2230/A2231)
Specifically designed for :
Get Start
Package Contents
Keyboard features
02
CAPS

Function key description
Main screen/Esc
Search
PrevTrack Play/pause
NextTrack Mute Volume -
Volume + Lock screen
Brightness- Brightness+
CopyVirtual Keyboard
Paste
=
=
=
=
=
=
=
=
=
=
=
=
=
=
: the first page
: the first line
: turn on the B-tooth paring mode
: adjust 10 tricolor backlight (mix color)
: turn on/off the backlight breathing mode
: change the lightness of backlight color
: adjust 7 backlit's color (pure color)
+
+
+
+
: the last page+
+
+
/
/
: the last line
+
03

How to get the keyboard sync with iPad
1. Power on the keyboard by sliding the On/Off to On position.
Then press ‘fn’ and letter ‘c’ button together, the blue led light flash, the
Bluetooth of the keyboard is opened.
2. Turn on the Bluetooth of your iPad.
3. Open the iPad Bluetooth Search when the Bluetooth pair lights twinkling.
4. Then there will be "Bluetooth Keyboard" comes up in the searching page, select
it, the Bluetooth will be connected.
If a problem persists, please try the following steps:
- Full charge the keyboard
- Update iPad to lastest version
- Delete all the Bluetooth devices on the iPad
- Reboot the iPad
1. No button is pressed within 1 minute, the backlight will go out automatically.
2. Not button is pressed within 10 minutes, the keyboard will be sleep to save
power mode.
3. The backlight function will be turned off automatically with low battery.
4. Breathing adjustment is not supported when the breathing mode is turned
on, and then press will exit the breathing mode and convert to normal
low brightness backlight mode, you can press to adjust the brightness
of the backlit.
04

Keyboard is too sensitive and always mistype.
In your iPad, there are some smart settings and it impacts to the typing experience and
sensitivity of the typing, it sometimes cause the keyboard too sensitive and easily to
mistype, you could toggle off the settings in Keyboard(Auto-Correction, Enable Caps
Lock, Shortcuts, Smart Punctuation, Split, Key repeat...)
The Bluetooth function will turn to sleep if you don't press the keyboard beyond 10
minutes, at this situation, you just need to press any key on the keyboard to wake
up the Bluetooth get it to work again. (Don't need to re-connect the Bluetooth)
- Switch on Bluetooth on the iPad
- Switch the keyboard off and on
- reconnect the keyboard
+
05

Installation and removal
LED indicator
Charging
1) Removing back protective piece: hold iPad on both sides and use
thumbs to gently push off the back cover (see photo.) Cover is held
in place by two tabs.
2) Proceed to “peel” cover away from iPad.
3) Take iPad out.
Blue LED, will flash when searching paring device, will be extinguished
after successful pairing.
Red LED will always be on when charging, and will be off when full of charge.
Green LED will flash when it is powered off, and it will always be on when it
is fully charged.
When you turn on the keyboard, the green and blue LED will shine
about 3 seconds.
1. Please charge the keyboard with your iPad's charging cable.
2.Fully charge your keyboard, or charge it for more than 3 hours, before
you use it for the first time.
The keyboard charging port is TYPE C, the input voltage can not exceed
DC-5V, the keyboard will be broken if the voltage exceed the limit.
06

battery capacity 500mah
charging time 2 hours
8 hours continuous using time when the backlit is on
200 daysStand by time
Working distance 33 feet (10 meters)
Operating Current <5 MA
3.7 V DCOperating Voltage
Standby Current 1.0 MA
Dimensions 9. 7x7x0.6 inches
2 hoursCharging time
60 hours continuous using time when the backlit is off
Specifications
4) Take iPad out upwards.
or
Find out an expired card
Insert the card into the gap and push the card to the cover side a little bit
Slid the card from one side to another
Separate the iPad from the cover easily
07

Pre-use settings
Working environment
1. Stay away from oil, chemical or other organic liquid articles. Note: liquid intake
can lead to a short circuit.
2. Stay away from 2.4G frequency items such as microwave ovens, routers and so
on. Note: it will interfere with Bluetooth.
3. Prevent sunlight exposure and high temperature.
1. Turn on the lock / unlock function
After your iPad is connected the bluetooth with our keyboard , please go to iPad
settings - display and brightness - locking / unlocking function - turn it on.
Remarks: If the locking / unlocking function is not turned on, you can’t wake up the
bluetooth function nor wake up the iPad by pressing any key on the keyboard
after the iPad is in a dormant state.
08
( 1 ） ( 2 ）

2. Turn off the mouse key function
Go to iPad settings - Accessibility - Touch - Assistive touch - Mouse key
- turn it off.
Remarks: If the mouse key function is not turn off, it will cause the number
key‘7. 8. 9’and letter key ‘U. I. O. J. K. L. M’ can’t be entered.
09
( 1 ） ( 2 ）
( 3 )
( 5 )
( 4 )

10
If you have any questions about your order, or any other matter, please contact us by email.