EastPoint Belvidere 32103 User manual

ITEM# 1-1-32103
Olt / 2.441n BILLIARD TABLE
with DARTBOARD and CUE RACK
Assembly Instructions
Model # 32103
www.eastpointsports.com
TWO OR MORE ADULTS REQUIRED FOR ASSEMBLY

IMPORTANT
-
Lay out all parts before you begin
Please review the parts identifier and make sure that you have all parts before beginning assembly.
If any questions or issues, please contact us at 1-973-585-4747 BEFORE returning the product to the original place
of purchase.
Please keep your original sales receipt. Staple it on the adjacent page in the space provided for future reference/use.
it will be required to receive service help or parts under warranty.
CONTACT INFO|
| Hours Technical Support or Replacement Parts
| Monday to Friday Emailusat: [email protected]
(9:00am to 5pm EST) | Visit us at: www.eastpointsports.com
Call: 973-585-4747

BEFORE BUILDING -
Please inspect your playfield
Your Cabinet (Billiard table Playfield) is NOT replaceable. Any damage that exists to your playfield is not
reparable under warranty. If your playfield is damaged, the entire game must be returned to the original
place of purchase for an exchange.
Please attach
It will be required to receive service help or parts under warranty.
i
i
i
RECEIPT HERE ,
i
i

TOOLS
Required
« 1- Phillips Head Screwdriver « Electric Screwdriver or Power Driver
(Standard Size) — Not Included CAUTION - DO NOT OVER TIGHTEN. Over Tightening
will result in irreparable damage to the product. If using,
please make sure that the tool is set to a very low torque
to prevent damage to the product.
¢ 1-Flat Head Screwdriver
(Standard Size) — Not Included
e 1 -Wrench - Included - Socket Wrench Set
How to use the: Instructions Parts ID #
PARTS IDENTIFIER , ore
Part Name-~
_- Part Image
Before you begin assembly, please make sure that 1 g
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Part Quantity
Be sure to work on the assembly on a soft a
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage Item #7
to the table surface during assembly.
*s Step Used In
PARTS IDENTIFIER
Components
Support - Bar Leg Panel - Groove Leg Top
# 32103-O1ES # 32103-O02ES # 32103-03ES
Side Cabinet
# 32103-06ES
Leg Base Corner Brace
LY
# 32103-04ES # 32103-O5ES

Components cont.
End Cabinet
# 32103-07ES
Main Cabinet
# 32103-O08ES
Sa
Shim - Imm
C5
# 32101-11ES
STEP #8
Shim - 2mm
C2
#32101-12ES
STEP #8
Pocket Corner (Pre-Installed)
(5%
660
# 32103-13ES
PRE-INSTALLED
Shim - 3mm
#32101-13ES
STEP #8
——_
Pocket Side (Pre-Installed)
# 32103-12ES
PRE-INSTALLED

Hardware
6.5 x 35mm Allen Key Bolt
=
# 32103-6058
Allen Key
_
# 37003-6258
Ay 44. 5mm Screws
| ooo
#37003-60ES
8x 38mm Bolt
Ee
#32101-65ES
STEP #3,4and7
8 x 19mm Washer
©)
# 32101-6168
STEP #3,4,and7
“L" Bracket - Steel
(Pre-assembled on Part#1)
ra
STEP #5
Wrench
a
# 32101-6968
ee ge ele)
Nut - Hex - 8mm
«o)
# 32101-6668
Surface Leveler
(Pre-assembled on Part#68)
# 32103-69ES
4x18mm Screws
7
# 32103-70ES
6.5x 50mm Allen Key Bolt
=
# 32103-6765

Accessories
Chalk Triangle Brush
# 32103-31ES # 32103-32ES # 37003-27ES
Billiard Balls Cues
OOOC ee
3558 Ss
# 37003-26ES # 32101-32ES

BILLIARD TABLE.- instructions
(BEFORE) NOTE:
BEFORE BUILDING -
Please inspect your playfield
and layout all your parts
Your Cabinet (Billiard Table playfield)
is NOT replaceable. Any damage that
exists to your playfield is not reparable under
warranty. If your playfield is damaged, the entire
game must be returned to the original place of
purchase for an exchange.
Bee) a) lag ous
@)
Leg
Panel
-
Groove
Repeat
for
all
4
legs.
Pas eae
6.5x35mm Allen Key Bolt x32
Allen Key
( STEP2 )
COMPONENTS ee
NOTE:
T
os
(62)
G)
Leg
Top
NOTE:
Top
:Top
e
>
<a
attachment
attachment
Sera
LeaB
a
blocks
and
@
eg
base
piocks
and
te
9
Panel
-
Step
1
Assembly
should
face
roove
should
face
forward
forward
Step
1
Assembly
ees
(e104
va
leos.
NOTES

COMPONENTS
Ps
8x38mm Bolt (use 16 of 32)
8x19mm_ Washer (use 16 of 56)
Wrench
(eae
x4
Ea
(ola:
x16
x16
—
NOTE:
Repeat for all
four corners.
Do not
overtighten.
( STEP4 }
NOTE: Area cut away in
image to show screw holes
Step 3 Assembly
COMPONENTS
Step 2 Assembly
Step 3 Assembly
elas
8x38mm Bolt
8x 19mm Washer
Wrench
ola
x4
xX
|
[s
ae
x16
(2)
x16
—
Oy a
NOTE: Area
cut away in
image to show
screw holes
Repeat for all
four corners.
Do not
overtighten.

( STEP5 }
STEP 5A
Assembly for support bar Ss
STEP 5B
Attaching surface
levelers to backside
of playfield .
COMPONENTS
aes
Allen Key
6.5x 50mm Allen Key Bolt
COMPONENTS
Assembly 5A
elas
“L” Bracket - Steel
(Pre-assembled on Part#1)
(69) Surface Leveler
(Pre-assembled on Part#68)
Cine
xt |
x]
One
One
NOTES
Repeat for
both sides of
support bar.
Repeat for
both surface
levelers .
NOTE: Using two
adults pick up and
flip step 4/5 assemblies.
NOTE: Avoid sideways
pressure to legs when
flipping over
4x18mm Screw s
COMPONENTS eloe NOTES
Step 4 Assembly NOTE: Using
two adults pick
Step 5 Assembly up and flip step 4/5
assemblies.
Then carefully
position the main
cabinet into
position.
NOTE: Avoid
sideways pressure
to legs.