EastPoint Springfield User manual

ITEM# 1-1-32101
JIL, 2.29 12 BILLIARD [TABLE
and CUE RACK
Assembly Instructions
Model # 32101
www.eastpointsports.com
TWO OR MORE ADULTS REQUIRED FOR ASSEMBLY

EASTPOINT
IMPORTANT -
« Table components are stored in the bottom of the cabinet .
« Remove carton containing lower aprons.
« Replace carton top and turn table over.
Note: Use at least 2 adults to pick up and flip table.
. Remove lower carton.
Lay out all parts before you begin
+ Please review the parts identifier and make sure that you have all parts before beginning assembly.
« — If any questions or issues, please contact us at 1-973-585-4747 BEFORE returning the product to the original place
of purchase.
+ Please keep your original sales receipt. Staple it on the adjacent page in the space provided for future reference/use.
It will be required to receive service help or parts under warranty.
CONTACT INFO
Hours _ Technical Support or Replacement Parts
Monday to Friday Emailusat: [email protected]
(9:00am to 5pm EST) Visit us at: www.eastpointsports.com
Call: 973-585-4747

BEFORE BUILDING -
Please inspect your playfield
Your Cabinet (Billiard table Playfield) is NOT replaceable. Any damage that exists to your playfield is not
reparable under warranty. If your playfield is damaged, the entire game must be returned to the original
place of purchase for an exchange.
Please attach
It will be required to receive service help or parts under warranty.
i
i
i
RECEIPT HERE ,
i
i

¢ Electric Screwdriver or Power Driver
Req uired CAUTION - DO NOT OVER TIGHTEN. Over Tightening
- 1-Phillips Head Screwdriver will result in irreparable damage to the product. If using,
(Standard Size) — Not Included please make sure that the tool is set to a very low torque
to prevent damage to the product.
« 1 - Flat Head Screwdriver
(Standard Size) — Not Included » Socket Wrench Set
e 1 -Wrench - Included ¢ Level
How to use the: Instructions Parts ID #
PARTS IDENTIFIER aor
cv
. Part Name | -Part Image
Before you begin assembly, please make sure that
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Part Quantity
Be sure to work on the assembly on a soft a
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage
to the table surface during assembly.
*s Step Used In
PARTS IDENTIFIER
Components
Leg Top Panel Leg Support Plastic Leg-A
COS
SZ
#32101-O1ES #32101-O2ES #32101-03ES ©
FOR USE WITHSTEP #2
Plastic Leg - B_ Plastic Leg -C Plastic Leg - D
# 32101-04ES. #32101-05ES # 32101-O6ES
FOR USE WITH STEP #2 FOR USE WITH STEP #2 FOR USE WITH STEP #2

Components cont.
Connect Board
# 32101-07ES
FOR USE WITHSTEP #6
Lower Side Apron
# 32101-O8ES
FOR USE WITHSTEP #6
Lower End Apron
# 32101-O9ES
FOR USE WITHSTEP #6
Main Frame
# 32101-10ES
FOR USE WITHSTEP #8
Imm Shim
Co
#32101-11ES
FOR USE WITH STEP #10
2mm Shim
Co
# 32101-12ES
FOR USE WITH STEP #10
3mm Shim
Co
# 32101-13ES
FOR USE WITH STEP #10
Cue Rack - Left Side
# 32101-14ES
FOR USE WITH STEP #A
Cue Rack - Right Side
# 32101-15ES
FOR USE WITH STEP #A
Cue Rack - Middle Shelf
# 32101-16ES
FOR USE WITHSTEP #A
Cue Rack - Top Panel
# 32101-17ES
FOR USE WITH STEP #B
Cue Rack - Base Panel
a,
# 32101-18ES
FOR USE WITH STEP #B
Cue Rack Hook
# 32101-19ES
FOR USE WITH STEP #B
Cue Holder
# 32101-20ES
FOR USE WITH STEP #B
Triangle Holder
u
XQ
# 32101-21ES
FOR USE WITH STEP #B

Hardware
8 x76mm Hex Bolt
Or yy»
# 32101-6058
8x19mm Washer
# 32101-6168
Cee ee
8mm- Barrel Nut
SO
#32101-62ES
4x 12mm Screw
(ea
#32101-63ES
STEP #3&B
3xi2mm Screws
Cama
# 32101-6458
8x38mm Hex Bolt
m=
# 32101-6568
SIEP #6,7,&9
3x12mm Flat Head Screw
Pyaar
# 32101-6858
STEP #B
Wrench
=
# 32101-6968
STEP #5,6,7,&9
#32101-66ES
4x44 5mm Flat Head Screw
Syme
#37003-60ES
STEP #A&B

Accessories
Brush
a
# 32101-30ES
Cue Chalk
Ye
# 37003-27ES
Pool Balls
# 37003-26ES
Triangle
YY
# 37003-25ES
57” Pool Cue
0
oT _ b=
# 32101-32ES

BILLIARD TABLE. instructions
( BEFORE )})
BEFORE BUILDING -
eis
Please inspect your playfield
and layout all your parts
Your Cabinet (Billiard Table playfield) is NOT replaceable.
Any damage that exists to your playfield is not reparable under
warranty. If your playfield is damaged, the entire game must be
returned to the original place of purchase for an exchange.
Visit www.eastpointsports.com to view video that
shows how to assemble billiard table legs .
Pieces must align
COMPONENTS QTY.
CG) Leg Top Panel
@) Leg Support
HARDWARE ola e
x76mm Hex Bolt
61) ax19mm Washer (use 8 ofthe 64)
8mm - Barrel Nut
NOTE:
Repeat for
all 4 legs.
NOTE: Finger
tighten bolt
(#60) only.
( STEP2 }
Back of Leg Front of Leg
Listen for “click” sound when
snapping legs together. This
will indicate that the legs are
locked firmly in place.
eee) aS
G) Plastic Leg-A 4
(4) Plastic Leg -B 4
G) Plastic Leg -C 4
(6) Plastic Leg - D 4
SEE
EE
Nees
«Repeat for
all 4 legs.
Look for letters
(A,B,C,D) on the
inside of the
leg panels.
@Make sure leg
panels Snap
and Lock
together.

Step 2
Assembly - AB
COMPONENTS ele NOTE:
Step 1 Assembly Repeat for all
four legs.
Step 2 Assembly - AB
Do not
overtighten
screws.
ales
4x 12mm Screw (use 8 of 13)
Step 1
Assembly
( STEP4 }
——____/ COMPONENTS Cine) | elas
Repeat for all
- 4
Step 2 Step 3 Assembly Step 2 Assembly - CD four legs.
Assembly - CD Step 3 Assembly
Do not
overtighten
Screws.
Side view leg
COMPONENTS QTY. NOTES
Step 4 Assembly Repeat for all
four legs.
Do not
STEP 5A overtighten
Screws.
NS e]0¢
3x12mm Screws x16

COMPONENTS ef NOTE:
@) Connect Board Repeat for all
four corners.
Lower Side Apron
(9) Lower End Apron
HARDWARE Cle
661) 8x19mm Washer
(65) 838mm Hex Bolt
COMPONENTS les NOTE:
Step 5 Assembly Repeat for all
four legs.
Step 6 Assembly
Do not
overtighten
Screws.
Aes Ole
adults pick up and
flip Step 7 Assembly.
pressure to legs when
flipping over
eee aS
Main Frame
Step 7 Assembly
NOTES
Using at least
two adults
pick up and flip Step
7 Assembly.
Pick table up flip
over and place
straight down.
NOTE: Avoid
sideways pressure
to legs