EastPoint PRESLEY 1-1-35633 User manual

PRESLEY™
54 in (1.37m) Table Soccer Game
Assembly Instructions
Model 1-1-35633
CONTACT INFO
Hours
Monday to Friday
(9am to 5pm EST)
Technical Support
Email us at: [email protected]
Visit us at: www.eastpointsports.com
Call: 973-585-4747
www.eastpointsports.com
Small balls.
N ot for children under 3 years.
WARNING:
CHOKING HAZARD -
TWO OR MORE ADULTS
REQUIRED FOR ASSEMBLY

1
CONTACT INFO
Hours
Monday to Friday
(9am to 5pm EST)
Technical Support
Email us at: [email protected]
Visit us at: www.eastpointsports.com
Call: 973-585-4747
IMPORTANT -
Lay out all parts before you begin
• Please review the parts identier and make sure that you have all parts before beginning assembly.
• If any questions or issues, please contact us at 1-973-585-4747 BEFORE returning the product to the original place
of purchase.
• Please keep your original sales receipt. Staple it on the adjacent page in the space provided for future reference/use.
It will be required to receive service help or parts under warranty.

2
BEFORE BUILDING -
Please inspect your playeld
Your Table Game Playeld is NOT replaceable. Any damage that exists to your playeld is not reparable under warranty. If
your playeld is damaged, the entire game must be returned to the original place of purchase for an exchange.
Please attach
RECEIPT HERE
It will be required to receive service help or parts under warranty.

Recommended (Not Required):Required
TOOLS
• Phillips Head Screwdriver
(Standard Size) – Not Included
• Flat Head Screwdriver
(Standard Size) – Not Included
• Allen Wrench - Included
• Electric Screwdriver or Power Driver
CAUTION: DO NOT OVER TIGHTEN. If using Electric Screwdriver or
Power Driver, please make sure that the tool is set to a very low torque to
prevent damage to the product.
• Socket Wrench Set
• Level
How to use the PARTS IDENTIFIER
Before you begin assembly, please make sure that
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Be sure to work on the assembly on a soft
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage
to the table surface during assembly.
1
STEP 1
Part Name
35500-01234 x2
Instructions Parts ID #
Part #
Part Name
Part Image
Part Quantity
Step
Used In
PARTS IDENTIFIER
x2
Panel - Goal End
35633-01477
STEP 1
1
x2
Rail - Top End
35633-02477
STEP 1
2
x2
Apron - Side
35633-03477
STEP 2
3
x1
Playfield
NOT REPLACEABLE
STEP 3
4
x2
Apron - End
35633-05477
STEP 4
5
x4
Leg
35533-06477
STEP 4
6
x4
Leg Leveler
35633-07477
STEP 4
7
x2
Playfield - Support Brace
35533-08477
STEP 7
8
x2
Playfield - Support Rod
35533-09477
STEP 7
9
x2
Goal Box
35533-10477
STEP 8
10
x2
Entry Cup - Inside
35633-11477
STEP 10
11
x2
Entry Cup - Outside
35633-12477
STEP 10
12
3

PARTS IDENTIFIER
x2
Rod - 2 Player
35533-13477
STEP 11
13
x4
Rod - 3 Player
35533-14477
STEP 11
14
x2
Rod - 5 Player
35533-15477
STEP 11
15
x16
Rod - Bumper
35533-16477
STEP 11
16
x16
Rod - Washer - Molded
35533-17477
STEP 11
17
x13
Player - Black
35633-18477
STEP 11, 12
18
x13
Player - White
35633-19477
STEP 11, 12
19
x2
F - Channel
35633-20477
STEP 10
20
x8
Rod - End Cap
35533-21477
STEP 13
21
x8
Rod - Handle - Molded
35533-22477
STEP 13
22
x1
Scorer - Bead - Black
35633-23477
STEP 13
23
x1
Scorer - Bead - White
35633-24477
STEP 13
24
PRE-INSTALLED PARTS
x2
Ball Return Cover
35633-37477
PRE-INSTALLED
37
x16
Rod - Outside Bushing
35633-38477
PRE-INSTALLED
38
x16
Rod - Inside Bushing
35633-39477
PRE-INSTALLED
39
x2
Goal Cover
35633-40477
PRE-INSTALLED
40
x10
Bracket - L
35533-41477
PRE-INSTALLED
41
4

HARDWARE
x20
Screw - Medium
35533-60477
STEP 1, 6
60
x24
Screw - Large
35533-61477
STEP 2, 3
61
x16
Bolt - Medium
35533-62477
STEP 4, 5
62
x4
T - Nut
35533-63477
STEP 7
63
x8
Screw - Small
35533-64477
STEP 8
64
x2
Allen Key
35533-68477
68
x4
Screw - XL
35533-65477
STEP 13
65
x26
Bolt - Small
35533-66477
STEP 12
66
x26
Nut
35533-67477
STEP 12
67
ACCESSORIES
x2
Foosball
35533-80477
80
5
BEFORE BUILDING - Please inspect and layout all your PARTS
START
Please review
the Parts
Identier and
make sure that
you have all
parts before
beginning
assembly.
All parts are listed in the Parts
Identier and Accessories.
Your Cabinet (Table Game Playeld)
is NOT REPLACEABLE. Any damage
that exists to your playeld is not
reparable under warranty. If your
playeld is damaged, the entire
game must be returned to the
original place of purchase for an
exchange.
Game Construction
ASSEMBLY INSTRUCTIONS

6
Repeat for both
ends.
DO NOT
overtighten
Screws.
NOTE:
STEP 2 COMPONENTS QTY.
HARDWARE QTY.
Step 1 Assembly
x2
Apron - Side
x2
3
Screw - Large
x8
61
Repeat for both
sides.
DO NOT
overtighten
Screws.
NOTE:
STEP 1 COMPONENTS QTY.
HARDWARE QTY.
Panel - Goal End
x2
1
Rail - Top End
x2
2
Screw - Medium
x12
60
Playeld must
be ush with
outer edge of
Goal Board
before inserting
Screws.
NOTE:
STEP 3 COMPONENTS QTY.
HARDWARE QTY.
Step 2 Assembly
x1
Playfield
x1
4
Screw - Large
x16
61
3
Step 1 Assembly
Step 1 Assembly
61
2
60
1
NOTE:
Brackets go
on Black
Laminate Side.
61
4
Step 2 Assembly

7
Repeat for both
sides.
DO NOT
overtighten
Bolts.
NOTE:
STEP 5 COMPONENTS QTY.
HARDWARE QTY.
Step 3 Assembly
x1
Step 4 Assembly
x2
Bolt - Medium
x8
62
Allen Key
x1
68
Attach Legs to
End Aprons.
DO NOT
overtighten
Bolts.
Install all 4 Leg
Levelers.
NOTE:
STEP 4 COMPONENTS QTY.
HARDWARE QTY.
Apron - End
x2
5
Leg
x4
6
Leg Leveler
x4
7
Bolt - Medium
x8
62
Allen Key
x1
68
Repeat for both
sides.
DO NOT
overtighten
Screws.
NOTE:
STEP 6 COMPONENTS QTY.
HARDWARE QTY.
Step 5 Assembly
x1
Screw - Medium
x8
60
68
6
62
5
7
NOTE: Make sure
L-Brackets are on the
inside of the End Aprons.
68
62
Step 4 Assembly
Step 3 Assembly
Step 4 Assembly
60
Step 5 Assembly

8
Repeat for both
Goal Boxes.
DO NOT
overtighten
Screws.
NOTE:
STEP 8 COMPONENTS QTY.
HARDWARE QTY.
Step 7 Assembly
x1
Goal Box
x2
10
Screw - Small
x8
64
Lay Support
Brace on the
Playeld.
Slide Support
Rod through
the Apron and
into the
channel
on the Support
Brace.
Then attach the
T-Nuts to the
Rod by using
the Allen Key.
NOTE:
STEP 7 COMPONENTS QTY.
HARDWARE QTY.
Step 6 Assembly
x1
Playfield - Support Brace
x2
8
Playfield - Support Rod
x2
9
T - Nut
x4
63
Allen Key
x2
68
Using at least 2
STRONG ADULTS,
pick up & ip
table over.
Lift table & turn it
in the air.
To avoid damage,
DO NOT lean
table on its Legs.
Place on all 4 Leg
Levelers on the
oor at once.
NOTE:
STEP 9 COMPONENTS QTY.
Step 8 Assembly
x1
68
68
63
63
9
8
Step 6 Assembly
CHANNEL
10
64
Step 7 Assembly
DO NOT
lean table on Legs!
Step 8 Assembly

9
Peel and stick F- Channel ush to
side apron.
F - Channel should be angled
inwards towards the center of the
playeld.
Repeat for both sides.
Then insert the Entry Cup by
twisting the two halves together.
DO NOT overtighten Screws.
STEP 10 COMPONENTS QTY.
NOTE:
Step 9 Assembly
x1
Entry Cup - Inside
x2
11
Entry Cup - Outside
x2
12
F - Channel
x2
20
Your Goalie is always in your left
hand.
The screw side is the Player front
and the nut side is the Player back.
Hole in the end of Rod is where the
Handle goes.
STEP 11 COMPONENTS QTY.
NOTE:
Step 10 Assembly
x1
Rod - 2 Player
x2
13
Rod - 3 Player
x4
14
Rod - 5 Player
x2
15
Rod - Bumper
x16
16
Rod - Washer - Molded
x16
17
Player - Black
x13
18
Player - White
x13
19
NOTE:
Circular (Bolt)
side of Player
faces opponent’s
goal.
NUT SIDE
BOLT SIDE
14 1413 15
14 1315 14
18
19
16
17
Step 10 Assembly
NOTE:
Peel o adhesive
backing and apply
to both sides of the table.
20
11
12
Step 9 Assembly
NOTE: Hole at the end of Rod designates
handle location. See Arrow Location Below