Easy EASYindustry Wall User manual

EASYindustry Wall
Installation manual

The wall panels are made of stone wool membrane and aluminium frame.
The wall brackets are made of galvanised steel.
The application of the wall panels is to absorb sound in order to reduce
reverberation in indoor spaces and thereby improve the acoustics. The
panels can be placed by means of wall brackets on, for example, sheet
piling and sandwich panels.
For more information about this material, please visit our website or
contact us by telephone.
Points of attention
• Do not put any additional weight on the wall brackets, they are desig-
ned to carry the product alone;
• The wall panels are intended for use in dry indoor environments.
General
Need help?
Contact us!
[phone]
[e-mail]

Necessities
Components
Wall bracket A/B/C
Square nut M8 (in frame)
Set screw M8x16 (in frame)
Wing nut M8
Wall bracket
Optional:
Coupling plate A/B/C
Square nut M* (in frame)
Set screw M8x16 (in frame)
Wing nut M8
4x /2x per 1200 x 1200 panel
2x (max 2) 1200 x 1200 panel
4x
4x
4x
Power drill
Cross line laser
Spirit level
Screws and plugs
Tape measure

Determine attachment points
01
Draw the position of the wall brackets on the wall.
See dimension drawings at the back of the assembly
instructions.
Tip: Use the spirit level to mark off straight.

Screw the wall brackets onto the wall.
Please note! The lower wall brackets are mounted the
other way round.
02 Attach the wall
brackets

03
Hang the wall panel in the wall brackets and
secure it by tightening the wing nuts on the
set screws.
Attach the wall panel

04
Maak het koppelplaatje vast aan de
onderkant van het bovenste paneel door
de vleugelmoeren op de stelschroeven
te draaien. Hang het onderste paneel
in het koppelplaatje en de onderste
wandbeugels.
Connecting plate

EN22.1
#weareacoustics
This text has been compiled with the utmost care. The same applies to the test results and further certicates.
However, no rights may be derived from this text and modications are subject to change. It is not possible to
guarantee certain properties or the suitability of our products for a specic application. Please refer to our additional
conditions