PANTONE 072 C
PANTONE 123 C
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Digital Automatic Air Compressor.
Take the guesswork out of inating your tyres with this high-power digital tyre
compressor. It automatically inates and then stops when the correct pressure
is reached. Simply pre-set the required pressure with the digital touch control,
connect to your car cigarette socket, and then connect the hose to your tyre
valve. Its high-speed pump inates all types of tyres in half the time of many
standard mini-compressors. With a long-reach 12ft power cord it’s complete with
adaptors for inating airbeds and footballs. Easy to store, it measures a compact
L22xW14xD7.5cm.
BEFORE USE
The air compressor is a multifunction compressor designed for cars, motorcycles,
bicycles, rafts, air mattresses, and sports balls.
Read the instructions carefully before use and retain for future reference.
Powerrequired:12volts,10ampsDC.(NB–thecigarettelighter/powersourcemust
have a fuse of 15A or more). The compressor is designed for occasional use only.
Operationoveranextendedperiodoftimewilloverheattheunitanddamagethecompressor.Do
not use continuously for more than 10 minutes at a time. If the unit becomes hot or sluggish, stop
immediately and allow to cool for at least 30 minutes.
A 12v battery charger may be used to power the item but it must be rated at least 15 amps or more to
avoid damage. Not for use on high pressure items such as lorry or tractor tyres.
OPERATION
1. Select an adaptor if necessary for your article.
2. Checkthearticlesusermanualforthecorrectpressuretoinateto.
3. Place the hose end valve onto the valve of your item ensuring a good
connection is made. Close the thumb latch.
4. Plug the power cord into the cigarette lighter or power source of your car.
Turn on your car.
Compression will not start to work
ifyourrequiredpressureislower
than the pressure in your tyre
equipment
Unitswitchfor4types:PSI/BAR/KPA/Kg/cm2
Press“-”toloweryourrequiredpressure
Press“+”toincreaseyourrequiredpressure
PARTS DESCRIPTION
Item # Name
1. 12 Volt Plug
2. Valve/TyreChuck
3. Compressor Power Switch
4. Pressure Gauge
5. Mattress Adaptor
6. BallAdaptor
O : OFF
II : ON
OPERATION (continued)
5. Presstheunitbutton(thelefthandbutton–thismaybemarkedM)tochoosethemeasuringunit
required:pressonceforPSI,twiceforBAR,threetimesforKPAandfourtimesforKg.cm2.
6. The LCD display will show the current pressure reading of your article.
7. Pressthe+/-buttonstosettherequiredpressure.
8. Press the on switch of the compressor.
9. The compressor will then activate.
10.Whentherequiredpressureisreached,thecompressorwillcontinueforafewsecondsandthen
stop. Press the off switch and unplug the unit.
Important information:
The Digital Automatic Air Compressor will vibrate vigorously in use.
This is intentional and no cause for concern. The vibration will not damage either the product
itself or your tyres.
Caution:
Compressorwillnotstarttoworkifyourrequiredsettingpressureislowerthaninyourtyre
equipment.
Ifthecompressorhasbeensetsuccessfullythedisplaywillbenotashinganymore.
Anyactivitiesduringashingthecompressorwillnotwork.
Startunitonhighpressureinitiallymaydamagetheunit.Forhighpressurerequireshigher
current to start the motor.
Any short-circuit of product may damage the unit.
To inate sport equipment:
Ball:
1. InserttheBallAdaptor(6)intothevalve/tyrechuck(2)andpushdownthevalvelocklever(2)to
secure connection.
2. Pressadaptor’sneedle(6)intoballcarefully.
3. Follow compressor operation steps.
Bicycle Tyre:
1. Connectvalve/tyrechuck(2)tobicycletyreairvalveandpushdownthevalvelocklever(2)to
secure connection.
2. Follow compressor operation steps.
Mattress/Raft:
1. InserttheMattressAdaptor(5)intothevalve/tyrechuck(2)andpushdownthevalvelocklever(2)
to secure connection.
2. Pressadaptor’sneedle(6)intomattress/raftcarefully.
3. Follow compressor operation steps.
TROUBLE SHOOTING
Compressor does not start or blows fuses
•Pushthepowerplugrmlyintothepowersourceandtwistroundtoensureagoodconnection.
•Checkallpartsfordirtandcleanwherenecessary.
•Checkvehiclelighterfuse.Thisshouldbe15ampsminimum.
Compressor runs but does not inate
•Checkallconnectionsarecleanandsecure.
•Checkhosefordamageorleaks.
Compressor runs slowly
•Overheatedfromexcessiveuse–switchoffandallowtocool.
•Powersourcetoolow.
Automatically
inates to
the desired
pressure
Paper weight 60gsm
1
3
4
5
7
6
2