Easypix GOXTREME VISION+ User manual

EN
USER GUIDE
Congratulations on your purchase
of the GoXtreme Vision+!

EN
IMPORTANT INFORMATION
To ensure the optimum performance from your camera, please note the
following important information:
MicroSD card:
• Please ensure your memory card is formatted in the camera before first
using the card for the first time (Settings > Format).
• The maximum capacity memory card supported is 64GB.
Use of memory cards exceeding the maximum recommended capacity
may result in file errors.
• For best results, we recommend using high quality Micro SD cards Class
10 with U3 High Speed or higher.
Ensure a U3 rated memory card is used when recording 4K video. Using a
lower rated card may present data transfer speed issues due to the large
file size a 4K video produces.
• The recording time depends on the selected resolution.

EN
WiFi connection:
• Ensure you have downloaded the correct companion app for your
camera model.
• Please note that wireless transfer of files using the app is not possible
for video with resolution higher than 1080p. Files using any resolution
higher then 1080p can only be accessed via your computer using a card
reader.
Safety instructions:
WARNING: The camera is not suitable for children under 36 months
because of choking hazard.
WARNING: Always protect your camera from falls, blows and
bumps.
• Keep a sufficient distance from objects that generate strong magnetic
fields or radio waves, such as electrical appliances to prevent them from
damaging the product or affecting the sound and image quality.
• Store the device cool (at room temperature) in a dry and dust-free
location and never expose the product to high temperatures or
permanently direct sunlight.

EN
• In the unlikely event of overheating, smokes or unpleasant odors coming
out of the unit, disconnect it immediately from the charging cable and
remove the battery to avoid a fire.
WARNING: Before using the camera in the water, make sure that all
lids and closures on the camera and underwater housing are closed and
sealed.
• After using it in salty or chlorinated water, clean the case and let it dry.
• The camera should not be exposed to high temperature and humidity
differences to prevent condensation inside the case or behind the lens.
• After under water use, the housing must be left open to avoid
condensation or rusting.

EN
GOXTREME VISION+
Record / Shutter / OK
Speaker
Power on&off / Back
Up / WiFi on & off
Down
Micro SD Card Slot
USB
HDMI
Touchscreen
Charging LED
Recording LED

EN
CHARGING THE BATTERY
•Ensure the camera is charged completely before first use.
Remove the battery compartment cover and insert the battery.
• Keep the device away from children while charging.
• Ensure the camera is switched off when charging.
If the camera turns on automatically when connected to a power source
please turn it off to complete charging. A camera plugged into power and
switched on will not charge.
• The camera should only be charged via the USB port of a computer or a
USB power adapter with a maximum capacity of 1050mAh.
• Unplug the USB cable connected to the camera before using the camera.
• The battery life is - depending on the settings and outside temperature -
up to 90 minutes under optimal conditions.
Battery compartment

EN
DISPLAY ICONS
Current recording
mode (Video or Photo)
Video / Photo
Mode selection
Playback Mode
Battery
level
Settings Menu
Standby:
Slide to
the right
to unlock
the touch
screen
Memory card installed
Time elapsed
for current
recording
Total time capacity remaining on card (Video)
Number of photo capacity remaining on card

EN
1. SWITCHING BETWEEN PHOTO & VIDEO MODES
There are two ways to switch between video / photo:
1. Short press the power button.
2. Simply swipe to the left or right on the touch screen.
2. SELECT A VIDEO / PHOTO FUNCTION
Swipe up on the screen and choose between the different functions.
Select the
function
Close

EN
3. DETAILED PHOTO / VIDEO SETTINGS
If you are in photo or video mode, click on the settings icon.
The individual settings will then be displayed.
Scroll down to see them all.
Video/Photo
settings
General
settings
Back
Detailed
settings

EN
4. PLAYBACK MODE
Please click on the playback icon to enter the playback mode:
Play media
Back
Slide to next file
Delete
Press to enter
Playback mode

EN
5. SHORT CUTS
Swipe down the screen to enter the short cuts menu.
Audio recording
on/off
WiFi On/Off
Touch screen lock
Switch the
camera off

EN
WiFi FUNCTION
Before using the WiFi function, please go to the App Store or GooglePlay
and install the XDV PRO app on your mobile phone or tablet PC.
There are 2 options to activate the camera WiFi:
1 - Press and hold the UP/ WiFi button for about 3-5 seconds to activate
the camera’s WiFi. The WiFi indicator LED will flash yellow to confirm that
the WiFi has been successfully activated and is ready to be connected.
2 - Swipe down on the camera screen and click the WiFi icon to open the
WiFi function.
When the WiFi has been activated the screen will display:
Wi-Fi ID: GoXtreme Vision_xxxx Wi-Fi PWD: 12345678
To connect the camera to your smartphone:
Open the WiFi settings on your mobile phone to search for the camera
device GoXtremeVision-XXXXfrom the available wireless networks.
(The password to complete the connection is 12345678).
When the connection has been confirmed on your smartphone, exit the
WiFi settings on your phone and open the XDV Pro app and select your
camera from the list. The app will complete the connection and display a
live view from your camera.

EN
Please note that it is not possible to wirelessly playback or transfer any
files exceeding 1080p resolution using the app.
Files using any resolution higher than 1080p can only be accessed via your
computer using a card reader.
When using the app for live view the camera screen will only display the
WiFi network info.
When you have finished using the WiFi function, please deactivate it as
this will extend the battery life.
Turning off the WiFi function on the camera:
Please short press the UP/ WiFi button to turn off the WiFi. The WiFi
indicator light will switch off to confirm the WiFi has been deactivated.
RECORDING VIDEO
•Choose your video recording mode by tapping on the
Video/Photo Mode Selection
•Press the record button to start filming.
•The video icon in the top right hand corner of the screen will
turn red to indicate that the camera is actively recording
while the elapsed recording time displays beside the red icon.
•Press the record button again to stop filming.

EN
Using the Remote
You can also use the remote control to start recording.
•Press the Record/OK button to start recording.
•Press the Record/OK button again to stop recording.
NOTE: Pressing the video recording button on the remote while in photo
mode will automatically switch the camera to video recording mode and
start the recording.
VIDEO RECORDING MODES
Choose your video recording mode by tapping on the Video/Photo Mode
Selection.
After adjusting a specific setting, press the ‘Back’ icon to return to the
recording screen.
VIDEO: Press the ‘Settings Menu’ icon to choose your recording resolution
and additional recording options.
SLO-MO: Records a slow motion video.
Press the ‘Settings Menu’ icon to choose your recording resolution, slow
motion speed and additional recording options.

EN
LOOP: When the 'Loop Recording' option is activated the camera will
record a video for the duration of time chosen and when the time has
elapsed the camera will start recording a new file for the same period of
time.
Each time a new recording is started it automatically overwrites the last
recording.
Press the ‘Settings Menu’ icon to choose your recording resolution, loop
video time duration and additional recording options.
LAPSE: Lapse mode allows a video recording taken over a long duration to
be compressed into a video with just a few minutes playing time, thus
creating a time lapsed effect.
Press the ‘Settings Menu’ icon to choose your recording resolution, lapse
settings and additional recording options.
TAKING A PHOTO
•Choose your photo mode by tapping the Video/Photo Mode
Selection
•Press the OK / Shutter button to take a photo.
•The photo icon in the top right hand corner of the display will
momentarily flash red to indicate that a photo has been
captured while the counter displays how many additional
photos can be saved on the card assuming that the memory is
not used for any additional video recordings etc.

EN
PHOTO MODES
PHOTO: Press the ‘Settings Menu’ icon to choose your photo resolution
and additional settings options.
After adjusting a specific setting, press the ‘Back’ icon to return to the
recording screen.
AUTO: With the Auto-Shoot function activated the camera automatically
takes a series of timed photos in repetition until the shutter button is
pressed to stop the sequence.
Press the ‘Settings Menu’ icon to choose the time interval between each
photo, the photo resolution and additional settings options.
BURST: The Burst Photo function allows you to take multiple photos in
rapid succession with just a single press of the shutter button.
Press the ‘Settings Menu’ icon to choose the number of photos taken per
second (Photo Frequency), photo resolution and additional settings
options.
TIMER: With the Self-Timer function activated, the camera automatically
takes a single photo after a set time delay e.g 3, 5, 10 or 20 seconds.
Press the ‘Settings Menu’ icon to choose the ‚count down’ duration, photo
resolution and additional settings options.

EN
PLAYBACK
Tap the ‘Playback’ icon on the touchscreen.
The counter on the top of the screen will display the current file number
and the total number of files available to view.
Tap the left (<) and right (>) icons to navigate through the various files.
When a video file is selected the ‘Play’button will appear.
Tap the play button to start video playback.
Tap anywhere on the screen to pause playback
DEVICE SETTINGS
To change the settings on your camera enter the device settings menu.
•Tap the settings icon
•On the next screen tap the settings icon again.
When the icon turns blue you are in the main device settings
menu.
IMAGE ROTATION: If you need to mount your camera upside down, turn
on image rotation to ensure videos are recorded ‘right way up’.
Wi-Fi: Tap to activate the WiFi function. Press the ‘Up’ button to
deactivate WiFi.

EN
WiFi INFORMATION:
•WiFi ID - Displays the device network ID –this is the network
you should search for in your smartphone WiFi settings
screen when connecting to the camera.
•Wi-Fi pwd –This is the password required to complete the
connection between your camera and your smartphone.
•Tap the screen to return to the settings menu.
RESET WIFI: In case you forget your WiFi password (which can be changed
inside the WiFi app), you can use the “Reset WiFi” function to reset it and
to restore the default WiFi settings.
LIGHT SOURCE FREQUENCY: Choose the power frequency of the
electricity network in your country. An incorrect setting may result in your
videos having a flickering effect if they have been recorded in artificial or
fluorescent light.
LED INDICATOR: Turns the blue LED indicator on or off.
When turned ‚On’ the LED indicator is illuminated when the camera is
powered on and blinks to confirm when a video recording is in progress.
AUTO SCREEN SAVER: To help prolong battery life, the camera screen can
be set to turn off after a preset period of time. If your screen turns off
while recording this will not affect the recording, simply press the shutter
button to turn the screen on again.

EN
AUTO POWER OFF: To help prolong battery life the camera can be set to
power off after a preset period of time.
BUTTON PROMPT: Adjusts the volume of the ‚beep’
TIME FORMAT: Choose your preferred option of how the date is displayed
on screen and in recordings and photos.
Note: You can choose to remove the time and date stamp from your
videos and recordings in the ‚Time Watermark’ option in the ‚Video
Settings’ and ‚Photo Settings’ menus.
FORMAT: To ensure maximum compatibility between your memory card and
camera, your memory card should always be format in your camera before first
use.
Tap ‚FORMAT’ to execute the format process.
WARNING: The format process will erase all files stored on the card. Please
ensure any important files are backed up before performing a format.
DEVICE INFO: Displays important information regarding the cameras current
firmware version.
Tap the screen to return to the settings menu.
FACTORY RESET: Restores all camera and menu settings to the factory default
settings.

EN
All product specifications are correct at time of print and are subject to change
without prior notice.
Easypix GmbH reserve the right for errors or omissions.
For technical help please visit our support area on www.easypix.eu.
CONFORMITY
The manufacturer hereby declares that the CE marking was applied to the product
GoXtreme Vision+ in accordance with the basic requirements and other relevant
provisions of the following CE Directives:
2014/53/EU
2011/65/EC RoHs
2014/30/EU EMV
2012/19/EC WEEE
The EC Declaration of Conformity can be downloaded here:
http://www.easypix.info/download/pdf/doc_goxtreme_vision_plus.pdf