
Power On
Press the power button about 5 seconds until the Power On/Off lights
green
Charging Your MiniTech Pro BT
Connect the USB charging cable to charging USB socket
The Power On/Off light stays red while charging. The red light will turn
off once it is fully charged.
Noted: The Power On/Off light keeps red when the battery is low.
Pairing Your MiniTech Pro BT
1) Press the power button to On
2) Push up and hold for 4 seconds to pair with Bluetooth until the
connection LED Indication flashes blue quickly.
3) Open the Bluetooth devices within range and select “MiniTech Pro BT”
from the list of devices shown.
4) When the pairing is completed, the LED Indication will flash blue twice
every 3 seconds.
Switch On/ Off Bluetooth
1)Press the Power button to On
2)Push up and hold for 2 seconds to turn the Bluetooth On until the
connection LED indication flashes blue twice every 3 seconds.
3)Push up and hold for 2 seconds to turn the Bluetooth Off again until
the connection LED indication goes off.
T Switch
When push Down for “T” Coil, the LED Indication changes to red.
12
11
11
11
13
13
13
13
13
15
4
4
4
10
Clear the pairing list:
Push up and hold the pairing switch for 10 seconds until the blue LED starts
flashing slowly.
When T-coil, microphone or line input activated then Bluetooth mode will
switch off automatically.
Answering and ending calls:
Push up the pairing switch, for 1 second then let go.