Echo WT160S User manual

PARTS MANUAL
PN: 12330
Rev. 092909
Companion to 12331
SN Range: 702577 to A05369
WHEELED
TRIMMER
WT160S 160 cc SELF-PROPELLED
WT160T 160 cc PUSH W/TILT
WT190 190 cc PUSH
WT190S 190 cc SELF-PROPELLED
WT190T 190 cc PUSH W/TILT
WT190SE 190 cc SELF-PROPELLED
ELECTRIC

Before You Begin
DEAR ECHO BEAR CAT CUSTOMER
Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear Cat line is designed, tested, and manufactured
to give years of dependable performance. To keep your machine operating at peak efciency, it is necessary to adjust
it correctly and make regular inspections. The following pages will assist you in the operation and maintenance of your
machine. Please read and understand this manual before operating your machine.
If you have any questions or comments about this manual, please call us toll-free at 1-800-247-7335.
If you have any questions or problems with your machine, please call or write your local authorized ECHO Bear Cat Dealer.
This document is based on information available at the time of its publication. ECHO Bear Cat is continually making
improvements and developing new equipment. In doing so, we reserve the right to make changes or add improvements
to our product without obligation for equipment previously sold.
PLEASE SEND US YOUR WARRANTY CARD
A warranty card is included in your owner's kit packaged with your machine. Please take the time to ll in the information
requested on the card. When you send your completed card to us, we will register your machine and start your
coverage under our limited warranty.
HOW TO CONTACT ECHO BEAR CAT
ADDRESS PHONE E-MAIL HOURS
237 NW 12th Street
P.O. Box 849
West Fargo, ND 58078
800-247-7335
701-282-5520
FAX: [phone]
[e-mail]
[e-mail]
Monday - Friday,
8 am to 5 pm
Central Time
SERIAL NUMBER
MANUFACTURED BY CRARY INDUSTRIES
MANUFACTURED IN U.S.A.
XXXXXX
WEST FARGO, NORTH DAKOTA 58078 U.S.A.
SERIAL NUMBER
© 2009, CRARY INDUSTRIES, ALL RIGHTS RESERVED. PRODUCED AND PRINTED IN THE U.S.A.
SERIAL NUMBER LOCATION
Please record the serial number in the space provided and
on the warranty and registration card.
ORDERING PARTS
Only genuine ECHO Bear Cat replacement parts should
be used to repair the machine. Replacement parts
manufactured by others could present safety hazards,
even though they may t on this machine. Replacement
parts are available from your ECHO Bear Cat dealer.
Provide the following when ordering parts:
The SERIAL NUMBER of your machine.
The PART NUMBER of the part.
The PART DESCRIPTION.
The QUANTITY needed.
FOR MACHINE SERVICE OR PARTS:
For service assistance, contact your nearest authorized
ECHO Bear Cat dealer or the factory. For parts, contact
your authorized dealer. The parts manual for your machine
is available at http://bearcatproducts.com/main/support/
index_html. Your dealer will need to know the serial number
of your machine to provide the most efcient service. See
below for information on how to identify and record the
serial number for your machine.
FOR ENGINE SERVICE OR PARTS:
For engine service or parts, contact your nearest authorized
engine dealer. ECHO Bear Cat does not handle any parts,
repairs or warranties for engines.

TABLE OF CONTENTS
MODEL WT160S ........................................................................................................ 2
MODEL WT160T......................................................................................................... 4
MODEL WT190........................................................................................................... 6
MODEL WT190S ........................................................................................................ 8
MODEL WT190T....................................................................................................... 10
MODEL WT190SE.................................................................................................... 12
DECALS.................................................................................................................... 14
SERVICE PARTS...................................................................................................... 15
DESCRIPTION PAGE

WHEELED TRIMMER
2
MODEL WT160S 9/09
36
38
73
71
9
49
53
27
31
44
25
58
4
19
30
5
62
54
7
31
37
48
1
18
27
23
34
75
55
21
2
56
29
57
2
59
6
52
64
45
31
27 31
27
72
10
31
42
60
69
12
20
63
30 19
16
15
17
70
74
47
27
50
27
31
35
43
13
28
22
11
40
18
29
24 40
65
29
42
61 69
12
39
14
27
31
29
33
31
27 51
26
8
3
67
23
68
31
27
30

WHEELED TRIMMER 3
9/09 MODEL WT160S
ITEM PART
NUMBER DESCRIPTION
1 12254 DECAL, CUTTER DANGER
2 12314 BEARING, 3/4” BALL
3 12319 PULLEY, 5.0 X 7/8 AB
4 12324 CABLE, BRAKE CONTROL
5 12326 PAD, FOAM HANDLEBAR
6 12348 STRING, 0.155 X 20-1/2 RND
7 12512 ENGINE, 5.5 HP HONDA GCV
8 12568 PULLEY, 7.5 OD X 12MM BORE
9 12571 SPROCKET, 35A60
10 12572 CHAIN, #35 X 68 PITHC W/CLINK
11 12573 BELT, 3L 52 INCH
12 12574 BEARING, 1/2 FLANGE
13 12755 DECAL, 5.5 HP INFORMATION
14 12834 TRANSMISSION 3-SPEED
TRIMMER
15 12842 CABLE, TRANSMISSION
CONTROL
16 12849 DECAL, 3 SPEED
17 12856 CABLE, SP CONTROL
18 15003 BOLT, 5/16 X 3/4” HEX HD
19 15030 WASHER, 1/4” FLAT
20 15093 BOLT, 1/4 X 2” HEX HD
21 15098 WASHER, 3/4” FLAT
22 15131 SCREW, 5/16-18 X 5/8” SQ HD
SET
23 15176 SCREW, 11/32 X 7/8” HWH AB
THREAD
24 15180 SCREW, 1/4 X 5/8” SQ HD SET
25 15197 BOLT, 1/4 X 2-1/4” HEX HD
26 15238 BOLT, 1/4 X 3/4” CRG
27 15250 WASHER, 5/16” FLAT
28 15282 BOLT, 5/16 X 1-1/2” HEX
29 15349 BOLT, 5/16 X 7/8” CRG
30 15355 NUT, 1/4” NYLOCK
31 15356 NUT, 5/16” NYLOCK
32 15372 KEY, 3/16 X 1” SQ
33 15397 NUT, #10 X 24 NYLOCK
34 15402 NUT, 5/16 X 18 TINNERMAN U-
TYPE
35 15403 BOLT, 5/16 X 1-3/4” HEX
36 15406 PUSHNUT, 5/8 IN
37 15416 WASHER, 5/16” SAE FLAT
38 15560 BOLT, 5/16 NC X 2-3/4” GR5 HCPS
ZP
39 15594 SCREW, #10 X 24 X 1-1/2 PAN
PHP ZP
40 15598 KEY, 4MM SQ X 20MM
41 15680-00 SCREW, 8-32 X 3/16 KNR CUP PT
42 15683-00 CLIP, E
43 16155 DECAL, SERIAL NUMBER
44 16239 CONTROL, THROTTLE
45 16900 STRAP, 4 INCH TIE
47 18008-00 CONTAINER, MANUAL
48 18949-00 DECAL, MANUAL/SAFETY INFO.
49 18950-00 RIVET, PLASTIC 1/4 X 7/8
50 18955-00 CAP, PLASTIC 3/4 X 1-1/2 TUBE
51 69126 SPACER, IDLER PIVOT
52 72705-12 DISK, TRIMMER HEAD
53 72723 FLAP, TRIMMER
54 72732-12 BAIL, TRIMMER
55 72754 WELDMENT, TRIMMER PULLEY
56 72755-12 WELDMENT, SPINDLE HUB
57 72759 SPACER, SPINDLE
58 72760 HANDLEBAR, TRIMMER
59 72781-12 SPACER, TRIMMER HEAD
60 72989 WELDMENT, WHEEL CLUTCH
61 72990 WELDMENT, WHEEL CLUTCH
62 72995-12 WELDMENT, SP BAIL
63 72999-12 ANCHOR, SP CABLE
64 73116-12 WELDMENT, TRIMMER HEAD
65 73264-12 BOTTOM, TRIMMER FRAME
66 73266-12 PAN, TRIMMER BOTTOM
67 73267-12 SUPPORT, TRANSMISSION
68 73630-35 BODY, TRIMMER
69 74836-00 SHRINK TUBE, 1.5 X 2.125” HEAT
70 74964-12 TUBE, CONTAINER HOLDER
71
73003
WHEEL, 16 INCH W/HOLES
(SN: 0-702576) (REPLACE WITH
PN 75884-00)
75417-00
WHEEL, TRIMMER WITH HOLES
(SN: 702577-705736) (REPLACE
WITH PN 75884-00)
75534-00 ASSEMBLY, TRIMMER WHEEL
(SN: 705737-CURRENT)
72 75501-12 WELDMENT, TRIMMER AXLE
73 75512-12 SHEET, CAP WHEEL
74 75518-12 CHANNEL, HANDLE SUPPORT
75 75519-35 COVER, FRONT COVER

WHEELED TRIMMER
4
MODEL WT160T 9/09
31
45
18
54
60
39
47
10
56
49
27
23
59
55
4
42
53
19
6
5
21
61
23
27
22
43
27
9
51
23
23 27
62
29
23
14
21
41
17
4
25
2
27
32
11
14
38
24
34
13
58
44
30 23
33
12
21
27
23
1
8
40
14
54
50
52
23
27
20
22
38
27
23
27
18
28
46 57
26 15
16
7
35
15

WHEELED TRIMMER 5
9/09 MODEL WT160T
ITEM PART
NUMBER DESCRIPTION
1 12177 SPRING, COMPRESSION
2 12254 DECAL, CUTTER DANGER
3 12275 FITTING, 1/4 SELF-TAP
GREASE
4 12314 BEARING, 3/4” BALL
5 12317 BELT, 4L X 53
6 12319 PULLEY, 5.0 X 7/8 AB
7 12324 CABLE, BRAKE CONTROL
8 12325 GRIP, ADJUST HANDLE
9 12326 PAD, FOAM HANDLEBAR
10 12348 STRING, 0.155 X 20-1/2 RND
11 12512 ENGINE, 5.5 HP HONDA GCV
12 12520 DEFLECTOR, EXHAUST
13 12755 DECAL, 5.5 HP INFORMATION
14 15003 BOLT, 5/16 X 3/4” HEX HD
15 15030 WASHER, 1/4” FLAT
16 15197 BOLT, 1/4 X 2-1/4” HEX HD
17 15098 WASHER, 3/4” FLAT
18 15129 WASHER, 5/8” SAE FLAT
19 15131 SCREW, 5/16-18 X 5/8” SQ HD
SET
20 15154 BOLT, 5/16 X 2-1/2” HEX
21 15176 SCREW, 11/32 X 7/8” HWH AB
THREAD
22 15219 BOLT, 5/16 X 1” HEX HD
23 15250 WASHER, 5/16” FLAT
24 15282 BOLT, 5/16 X 1-1/2” HEX
25 15349 BOLT, 5/16 X 7/8” CRG
26 15355 NUT, 1/4” NYLOCK
27 15356 NUT, 5/16” NYLOCK
28 15375 PIN, 1/8 X 1” COTTER
29 15402 NUT, 5/16 X 18 TINNERMAN
U-TYPE
30 15403 BOLT, 5/16 X 1-3/4” HEX
31 15406 PUSHNUT, 5/8 IN
32 15416 WASHER, 5/16” SAE FLAT
33 15434 KEY, 3/16 X 1-1/2” SQ.
34 16155 DECAL, SERIAL NUMBER
35 16239 CONTROL, THROTTLE
36 16740 DECAL, THROTTLE
CONTROL
38 17897 BEARING, 5/8” FLANGE
39 72723 FLAP, TRIMMER
40 72724 HANDLE, HEIGHT
ADJUSTMENT
41 72754 WELDMENT, TRIMMER
PULLEY
42 72759 SPACER, SPINDLE
43 72760 HANDLEBAR, TRIMMER
44 18008-00 CONTAINER, MANUAL
45
12316
WHEEL, 16” (SN: 0-702576)
(REPLACE WITH PN 75883-
00)
18903-00
WHEEL, 15” TRIMMER
(SN: 702577-705736)
(REPLACE WITH PN 75883-
00)
18957-00
WHEEL, 15” TRIMMER
(BLACK) (SN:705737-
CURRENT)
46 18949-00 DECAL, MANUAL/SAFETY
47 18950-00 RIVET, PLASTIC 1/4 X 7/8”
48 18955-00 CAP, PLASTIC 3/4 X 1-1/2”
TUBE
49 72705-12 DISK ,TRIMMER HEAD
50 72710-12 WELDMENT, AXLE PIVOT
51 72732-12 BAIL, TRIMMER
52 72736-12 ANGLE, HANDLE LOCK
53 72755-12 WELDMENT, SPINDLE HUB
54 72762-12 SPACER, 7/8 X 0.281
55 72781-12 SPACER, TRIMMER HEAD
56 73116-12 WELDMENT, TRIMMER HEAD
57 73298-35 WELDMENT, TRIMMER BODY
58 74964-12 TUBE, CONTAINER HOLDER
59 75504-12 BOTTOM, TRIMMER FRAME
60 75505-12 WELDMENT, TRIMMER AXLE
61 75518-12 CHANNEL, HANDLE
SUPPORT
62 75519-35 COVER, FRONT COVER

WHEELED TRIMMER
6
MODEL WT190 9/09
25
22 17
17
36
48
45
37
7
22
17
49
44
2
42
41
51
40
12
2
23
19
16
34
38
15
50
18
14
4
27
13
3
20
43
5
11
10
21
6
39
17
22
47
35
17
30
24
22
26
22
26
32
33
1
9
17
15
15
8
28
46
31

WHEELED TRIMMER 7
9/09 MODEL WT190
ITEM PART
NUMBER DESCRIPTION
1 12254 DECAL, CUTTER DANGER
2 12314 BEARING, 3/4” BALL
3 12317 BELT, 4L X 53
4 12319 PULLEY, 5.0 X 7/8 AB
5 12324 CABLE, BRAKE CONTROL
6 12326 PAD, FOAM HANDLEBAR
7 12348 STRING, 0.155 X 20-1/2 RND
8 14560-00 DECAL, 6.5 HP
INFORMATION
9 15003 BOLT, 5/16 X 3/4” HEX HD
10 15030 WASHER, 1/4” FLAT
11 15094 BOLT, 1/4 X 1-3/4” HEX HD
12 15098 WASHER, 3/4” FLAT
13 15131 SCREW, 5/16-18 X 5/8” SQ
HD SET
14 15154 BOLT, 5/16 X 2-1/2” HEX
15 15176 SCREW, 11/32 X 7/8” HWH AB
THREAD
16 15219 BOLT, 5/16 X 1” HEX HD
17 15250 WASHER, 5/16” FLAT
18 15282 BOLT, 5/16 X 1-1/2” HEX
19 15301 BOLT, 5/16 X 1” CRG
20 15349 BOLT, 5/16 X 7/8” CRG
21 15355 NUT, 1/4” NYLOCK
22 15356 NUT, 5/16” NYLOCK
23 15402 NUT, 5/16 X 18 TINNERMAN
U-TYPE
24 15403 BOLT, 5/16 X 1-3/4” HEX
25 15406 PUSHNUT, 5/8 IN
26 15416 WASHER, 5/16” SAE FLAT
27 15434 KEY, 3/16 X 1-1/2” SQ.
28 16155 DECAL, SERIAL NUMBER
30 18008-00 CONTAINER, MANUAL
31
12334
WHEEL, 14-1/2” (SN:
0-702576) (REPLACE WITH
PN 75883-00)
18903-00
WHEEL, 15” TRIMMER
(SN: 702577-705736)
(REPLACE WITH PN 75883-
00)
18957-00
WHEEL, 15” TRIMMER
(BLACK) (SN:
705737-CURRENT)
32
18945-00 ENGINE, 6.5 HP QUANTUM
(49 STATE)
14535-00 ENGINE, 6.5 HP QUANTUM
(G MODEL)
33 18949-00 DECAL, MANUAL/SAFETY
INFO.
34 18950-00 RIVET, PLASTIC 1/4 X 7/8
35 18955-00 CAP, PLASTIC 3/4 X 1-1/2
TUBE
36 69126 SPACER, IDLER PIVOT
37 72705-12 DISK, TRIMMER HEAD
38 72723 FLAP, TRIMMER
39 72732-12 BAIL, TRIMMER
40 72754 WELDMENT, TRIMMER
PULLEY
41 72755-12 WELDMENT, SPINDLE HUB
42 72759 SPACER, SPINDLE
43 72760 HANDLEBAR, TRIMMER
44 72781-12 SPACER, TRIMMER HEAD
45 73116-12 WELDMENT, TRIMMER HEAD
46 73630-35 BODY, TRIMMER
47 74964-12 TUBE, CONTAINER HOLDER
48 75503-12 WELDMENT, TRIMMER AXLE
49 75504-12 BOTTOM, TRIMMER FRAME
50 75518-12 CHANNEL, HANDLE
SUPPORT
51 75519-35 COVER, FRONT COVER

WHEELED TRIMMER
8
MODEL WT190S 9/09
35
33
71
69
8
42
54
28
28
24
62
56
6
28
24
9
28
34
52
15
24
1
53
21
31
73 43
18
2
58
44
2
59
63
24
28
28
17
45
5
60
4
16
27
25 20
28
34
64
70
50
47
67
11 36 50
46
67
27
11
28 24
41
23
17
61
1627
24
32 24
68
55
51
14
13
38 48
24
28
21
72
26
29
10 19 3
26
28
24
26
37
21
15 26
26
22 7
30
57
65
66
74