Ecler essentials eWAMPBT User manual

eWAMPBT
COMPACT AMPLIFIERS
Stereo wall amplifier with media player and Bluetooth
USER MANUAL

1
INDEX
Important note 2
Key features 3
Front Panel 3
Startup 4
FM 4
SD 4
USB 4
Bluetooth connection 5
AUX 5
Mechanical diagrams 5
Remote control 6
Technical specifications 7
Rear panel 8
Installation 9
Packing list 9

2
IMPORTANT NOTE
Congratulations! You are the owner of a carefully designed and manufactured
piece of equipment. We thank you for trusting in us and choosing our
eWAMPBT in-wall amplifier. In order to get the optimum operation and
efficiency from this unit, it is VERY IMPORTANT - before you plug anything in -
to read this document very carefully and bear in mind all considerations
specified within. We strongly recommend that maintenance be carried out by
our Authorized Technical services. Keep this document for future references.
PRECAUTIONS
•Never use this unit in proximity to water or fire
•Do not expose the unit to water splashing
•Avoid placing the unit next to heat sources such as spotlights or heaters
•The use of high voltage may cause electric shock or fire, take safety
precautions and use appropriate equipment when installing the device
•Install the device following manufacturer’s indications. An incorrect
installation may lead the device to fall down, causing a personal injury or
property damage
•The device must be installed in solid surface
•Do not manipulate the device with wet hands
•Do not pull the wires of an electric installation, it may cause fire or an
electric shock
•Do not remove the device when it is connected to the electric installation.
Before it, unplug the loudspeaker
•Do not install the device on vent covers
Warning: an inappropriate usage of the device could cause
injury, death or damage the apparatus.

Play/pause
Volume down
Previous
Mode (source selection)
Volume up
Next
Infrared receiver
Display
Micro SD
USB
Power ON
3
KEY FEATURES
•Built-in 2x10 WRMS high efficient amplifier @ 8 ohm
•Standard 86 box, luxurious appearance design with LED screen
•Multiple music connection modes, including FM, micro SD, USB, Bluetooth,
AUX1 and AUX2.
•Supports MP3, WMA, WAV, FLAC and other audio formats.
•Adjustable sensitivity of auxiliary input
•Can store up to 20 FM radio channels. Support automatic and manual search
•Wide voltage input, suitable for 100~240VAC, 50/60Hz
•Remote control included
•Surface-mount installation box included
FRONT PANEL
WARNING: connect the AC terminals to electrical mains supply
before powering ON the device.

4
STARTUP
FM
Press Mkey to choose FM mode.
Automatic Search: long press to start the automatic channel search and the
system will automatically save the available radio stations.
Manual tuning mode: long press or to enter the manual tuning mode; and then
short press or to adjust the current channel. If no key operation within 5
seconds, it will save the current channel and leave manual tuning mode.
Mute: short press for mute FM playback.
Channel selection: short press or to navigate through saved channels.
Volume control: short press + or - to increase or reduce the current volume.
SD
Press Mkey to choose SD mode. If there is no SD card, the display will show “NO” and
flicker. If files are not supported or there are no files, the display will show “----“.
Play control: to play/pause. Short press or to navigate through songs.
Long press to fast forward or fast reverse.
Volume control: short press + or -to increase or reduce the current volume.
USB
Press Mkey to choose USB mode. If there is no USB device, the display will show
“NO” and flicker. If files are not supported or there are no files, the display will show
“----“.
Play control: to play/pause. Short press or to navigate through songs.
Long press to fast forward or fast reverse.
Volume control: short press + or -to increase or reduce the current volume.

86mm
86mm
38mm
10mm
5
BLUETOOTH CONNECTION
Press Mkey to choose Bluetooth mode. If there is no connection, the display will
show “BT” and flicker. When the device is connected successfully, “BT” will be
always on. eWAMPBT is displayed in other devices as ECLERXXXXXXXXX, where
the last 9 digit numbers is the device’s serial number. The password can be found
in the rear side label.
Play control: to play/pause. Short press or to navigate through songs.
Long press to fast forward or fast reverse.
Volume control: short press + or -to increase or reduce the current
volume.
AUX
Press Mkey to choose AUX1 (or AUX2) mode.
Play control: to play/mute. When it is muted, the display will flicker.
Sensitivity adjustment: long press or to select S1 or S2 sensitivity
adjustment. S1: input and output 500mV; S2: input 1000mV, output 500mV)
Volume control: short press + or -to increase or reduce the current
volume.
MECHANICAL DIAGRAMS

1
4
6
2
3
5
7
8
6
REMOTE CONTROL
1. Standby
2. Mode selection (source selection)
3. Mute
4. Equalization mode selection
5. Menu (not available)
6. Transport & volume control
7. Play mode selection
8. Number keys. In SD mode allows to select a track number. In FM mode
allows write the FM frequency.

7
TECHNICAL SPECIFICATIONS
eWAMPBT
Power input
100-240V
Output power
2x10 WRMS
Rated impedance
8 ohm
THD
≤0.03% (1KHz, 1W, 8Ω)
S/N ratio
>81dB
Frequency response
20Hz~20kHz
Sensitivity Aux input (adjustable)
AUX1: 1V/500mV; AUX2: 1V/500mV
Audio formats
MP3, WMA, WAV, FLAC, etc.
Bluetooth
BT2.1+EDR
Storage
Support TF card up to 32GB
Dimensions
86×86×38mm
Remote Control
Angle of effective emitter region
60°
Effective remote-controlled distance
10m
Battery of remote control
CR2032

FM
AUX1
AUX2
SPEAKER 8 Ω
~100 -240V
1 2 3 4 5 6
8
REAR PANEL
1. Power input: 100-240V (2xRV 1.0mm² multistranded copper core
flexible wire)
2. FM antenna
3. Signal ground
4. Audio input 1 (2×0.3mm² double-shielded audio cable)
5. Audio input 2 (2×0.3mm² double-shielded audio cable)
6. Power amplifier output (2×0.3mm² double-shielded audio cable)
IMPORTANT NOTE: all wire connections shall not be naked
Function
Symbol
Name
Power input
N
Null line
L
Live wire
FM
ANT
FM antenna
GND
Signal ground
AUX1
R
Audio input right
L
Audio input left
AUX2
R
Audio input right
L
Audio input left
Power amplifier output 8
ohm
OUTL+
Left speaker + terminal
OUTL-
Left speaker - terminal
OUTR-
Right speaker - terminal
OUTR+
Right speaker + terminal

9
INSTALLATION
1. Install the surface-mount box in the desired location.
2. Connect the wiring to the rear panel of eWAMPBT, and fix it with two
screws to the installation box.
3. Insert the eWAMPBT's front panel.
PACKING LIST
•Front panel
•Rear panel
•Remote control
•Mounting screws
•Surface-mount box
•User manual
•Warranty card

Serial number:
Bluetooth password:
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or
improvements in the design or manufacturing that may affect these product specifications.
Motors, 166‐168 08038 Barcelona ‐ Spain ‐ ([phone] [e-mail] www.ecler.com