Ecler VEO-XPT44 User manual

VEO-XPT24
4K HDBaseT EXTENDER
HDMI 2.0 HDBaseT Extender Kit 18GBPS
USER MANUAL

2
INDEX
1. IMPORTANT REMARK ..........................................................................................................3
2. IMPORTANT SAFETY INSTRUCTIONS .............................................................................3
3. IMPORTANT NOTE ................................................................................................................5
4. INTRODUCTION ..................................................................................................................... 5
5. PACKAGE CONTENTS ..........................................................................................................6
6. PANEL DESCRIPTIONS......................................................................................................... 6
6.1. Transmitter Frontal Panel and Rear Panel ......................................................................... 6
6.2. Receiver Frontal and Rear Panel ........................................................................................... 7
7. CONNECTION AND INSTALLATION .................................................................................7
8. APPLICATION DIAGRAM .....................................................................................................8
9. TECHNICAL SPECIFICATIONS............................................................................................9

3
1. IMPORTANT REMARK
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING (If applicable): The terminals marked with symbol of “ ” may be of
sufficient magnitude to constitute a risk of electric shock. The external wiring connected
to the terminals requires installation by an instructed person or the use of ready-made
leads or cords.
WARNING:To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
WARNING:An apparatus with Class I construction shall be connected to a mains
socket-outlet with a protective earthing connection.
2. IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

4
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightening sorts or when unused for long periods of
time.
13. Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
14. Disconnecting from mains: Switching off the POWER switch all the functions
and light indicators of the amplifier will be stopped, but fully disconnecting the
device from mains is done unplugging the power cord from the mains input
socket. For this reason, it always shall remain readily operable.
15. Equipment is connected to a socket-outlet with earthing connection by means of
a power cord.
16. The marking information is located at the bottom of apparatus.
17. The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on apparatus.
NOTE: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
WARNING:This product must not be discarded, under any circumstance, as
unsorted urban waste. Take to the nearest electrical and electronic waste
treatment centre.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be
caused to people, animal or objects due to failure to comply with the warnings above.

5
3. IMPORTANT NOTE
Thank you for choosing our VEO-XPT44 4K HDBaseT EXTENDER. It is VERY
IMPORTANT to carefully read this manual and to fully understand its contents before
any connection in order to maximize your use and get the best performance from this
equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance
be carried out by our authorised Technical Services.
The VEO-XPT44 comes with a 3-year warranty.
4. INTRODUCTION
The Ecler VEO-XPT44 is a professional HDbaseT transmitter/receiver kit for HDMI 2.0a
extension of High Dynamic Range (HDR) formats. It supports video signals at resolution
up to 4K/UHD at 60Hz with 4:4:4 chroma sampling and any other HDMI data rate up to
18 Gbps. The VEO-XPT44 supports bidirectional PoH (Power Over HDbaseT) that
allows to use only one power supply connected to the Transmitter or the Receiver,
accordingly with the installation needs. The extender kit includes bidirectional IR and
RS232 pass-through. It represents the ideal solution for residential and commercial
applications that include the latest 4K/UHD and HDR sources and displays.
Features:
Complete extender kit, no settings needed
Bandwidth up to 18Gbps, resolution up to 4k @60hz YUV 4:4:4
HDR10 and 3D supported
Transmission distance reaches up to 70 meters under 1080p and 40 meters under
4K
Bi-directional IR and RS232 pass-through
Bidirectional POH (RX powered by TX or TX powered by RX)
1x looping HDMI out on Transmitter and 2 x HDMI out at Receiver for daisy
chaining or local monitoring purposes
Use single UTP/STP category cable (CAT-5E/6/7) to substitute HDMI cable to
achieve long distance transmission
HDCP2.2/1.4 compliant
ESD protection

6
5. PACKAGE CONTENTS
1 x Transmitter Unit
1 x Receiver Unit
1 x 24VDC International Power Supply (One PSU for both units)
1 x IR Blaster unit
1 x IR Receiver unit
2 x Phoenix plugs for RS232 cable termination
6. PANEL DESCRIPTIONS
6.1. Transmitter Frontal Panel and Rear Panel
1. HDMI Input Port
2. HDMI Looping Output Port
3. IR Receiver Port
4. IR Transmitter Port
5. 24V DC Plug Connector
6. USB port (Reserved for firmware updating)
7. CAT5e/6/7 Output
8. EDID Function Selector:
oAuto: default 4K@60Hz
oLocal: copy EDID data from the display connected to the transmitter
oRemote: copy EDID data from the display connected to the receiver
9. RS232 Port

7
6.2. Receiver Frontal and Rear Panel
1. HDMI Out1 Port
2. HDMI Out2 Port
3. IR Transmitter Port
4. IR Receiver Port
5. 24V DC Plug Connector
6. USB port (Reserved for firmware updating)
7. CAT5e/6/7 Input
8. RS232 Port
7. CONNECTION AND INSTALLATION
1. Connect a HDMI signal source (such as Blue Ray Player, STB etc) into the HDMI
input of VEO-XPT44.
2. Connect a CAT. 5e/6a/7 cable from RJ45 output of TX to RJ45 input of RX.
3. Connect a HDMI display device (such as a 4K or Full HD display) to the HDMI
output of VEO-XPT44
4. Connect the IR Blaser UNIT into IR-Out port of the Transmitter; Connect the IR
Receiver UNIT into IR-In port of the Receiver.

8
5. Phoenix RS232 Ports can be connected to DTE-DCE devices for pass-through
RS232 transmission.
6. Connect the 24VDC power supply to the VEO-XPT44 Transmitter.
8. APPLICATION DIAGRAM

9
9. TECHNICAL SPECIFICATIONS
Resolutions
Video 4096x2160@24/25/30/50/60Hz,
3840x2160@24/25/30/50/60Hz (UHD),2048x1080p,
[email protected]/24/25/29.97/30/50/59.94/60Hz,
1080i@50/59.94/60Hz,720p@50/59.94/60Hz,576p,576i,
480p, 480i
VESA 2560x2048, 2560x1600, 2048x1536, 1920x1200,
1680x1050, 1600x1200, 1600x900, 1440x900,
1400x1050, 1366x768, 1360x768, 1280x1024,
1280x800, 1280x768, 1152x864, 1024x768, 800x600,
640x480
Colorspace YCbCr, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color depth 8-bit, 10-bit, 12-bit, 16-bit only @4K30
HDR HDR10
Signal Bandwidth 18 Gbps
HDCP 2.2 Compliant
Audio Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS
5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD
Master Audio
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz, 192kHz
Bit rate up to 24-bit
Distance
CAT.5e/6 @ 4K up to 35 meters up to 115 feet
CAT.6a/7 @ 4K up to 40 meters up to 130 feet
CAT.5e/6 @ 1080p up to 60 meters up to 197 feet
CAT.6a/7 @ 1080p up to 70 meters up to 230 feet
Distance HDMI up to 10 meters with Ecler VEO cables

10
Temperature Operating -10 to +50°C (14 to +122 °F)
Humidity 5 to 90 % RH (no condensation)
Power Consumption 12 W (Max, TX+RX)
Supply Input: AC100~240V 50/60Hz Output: DC 24VDC 1A
Dimension H x W x D 140 × 67 × 20 (mm)
Weight 0.7Kg / 1.54lb (Pairs)

11
All product characteristics are subject to variation due to production tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or
manufacturing that may affect these product specifications.
Motors, 166‐168 08038 Barcelona ‐ Spain ‐ ([phone] | [e-mail] | www.ecler.com