Eclipse Z-8082 User manual

Z-8082
On-Counter 2D Image Scanner
Service Guide
Revision History
Changes to the original manual are listed below:
Version Date Description of Version
1.0 June 29, 2017 Initial release
1.1 June 5, 2019 Security code note added

Table of Contents
Table of Contents..........................................................................................................................................................2
Scanner Parts ..........................................................................................................................................................................3
Take Apart ....................................................................................................................................................................4
Before You Start ....................................................................................................................................................4
Important Instructions ..................................................................................................................................................4
Tools to Prepare .....................................................................................................................................................................4

Scanner Parts
The scanner includes the following parts:
NO. P/N Name Quantity
1 866-808200-304 Z-8082 back cover assembly (for repair) 1
2 866-808200-305 Z-8082 bottom cover assembly (repair) 1
3 601-080820-003 Z-8082 trigger rubber 1
4 030-015008-000 FFC cable 1
5 689-100000-036 Z-8082 light guide panel 1
6 866-808200-206 Z-8082 front cover assembly (for repair) 1
7 521-003000-8R0 Self tapping screw, M2-8.0mm 5
8 521-013000-5R0 Self tapping screw,M2-5.0mm 4
9 520-0040R5-010 Screw, M3*0.5-10.0mm 4
10 866-808200-007 Z-8082 speaker assembly (for repair) 1
11 160-001001-301 Z-8082 EAS wire (S-D161122-1) 1
12 531-1302R7-041 Nut, M3*0.5-2.7mm 2
13 564-080720-001 Z-8072 speaker base 1
14 564-080820-003 Z-8082 volume trigger 1
15 564-080820-005 Z-8082 speaker trigger 1
16 866-808200-502 Z-8082optical mirror base assembly 1
17 603-080820-002 Z-8082 front cover rubber 1
18 616-808206-001 Z-8082 LED board assembly 1
19 866-808202-703 Z-8082 engine assembly 1
Note: 866-808202-703 or main board（616-808232-20X）require security code burn-in before shipment.

Take Apart
Before You Start
Important Instructions
Read these instructions completely before you begin.
Follow all instructions.
Heed all warnings.
Tools to Prepare
Philips screwdriver.
Please follow these steps to take apart Z-8082.
1. Slide out the bottom cover (red arrows).
2. Remove the screws and untie the EAS wire.

3. Separate the back cover and remove the front cover rubber.
4. Remove the screws, the speaker, and the EAS wire.
5. Remove the screws and separate the front cover, LED board, trigger, and the light guide panel.

6. Remove the screws and separate the LED board and the optical mirror base (red circles).
7. Remove the nuts.