Eco-Flying H100 User manual

User Manual
Foldable Electric Scooter
Thanks for choosing our product.Have fun with this electric scooter.
H100

Contents
1.
2. Warning.................................................................................. 08
Product Description...............................................................03
Tyre Installation....................................................................... 04
Folding..................................................................................... 05
Handlebar Installation............................................................. 06
Product Specification/Product Packing List........................... 07
3. Safety Precautions..................................................................09
5. Maintenance........................................................................... 10
6.After Sale Service.................................................................... 11
7. Safety Recommendations....................................................... 12
8.Daily Maintenance and storage................................................ 13

01 Product Description
Product Structure
User Manual
Foldable Electric Scooter
Thanks forchoosing our product.Have fun with this electric scooter.
H100
ClassicTrot pro User Manual Charger &
Charger cable Fender
14
03
/Brake Handle
Horn
LCD Display
Grip
Power Switch
Folding Mechanism
Front Light
Fork
Front Disc Brake
Tire
Front Fender
Rear Fender
Motor
Rear Light
Rear Disc Brake
Battery

14
04
/01
Install the quick release parts in turn to the
front wheel.
Loosen the nut and put the front wheel in the
middle of the fork.
Slightly minor force launching, quitting fast
speed leisurely fitting, fitting before wheelchair,
finished inexpensive hard rocking, jumping one
piece swinging dynamic phenomenon.
For your safety, please check regularly to see if
the quick release is loosen, install the wrench in
the proper direction at 10 o'clock on the quick
release wrench.
Tyre Installation
02
03 04

14
05
/Lift the pole into a vertical position
Lock the lever Insert the hook through the special ring
Folding
01
02 03

14
06
/01
Loosen the quick release part The screw is knocked down and the lid is removed
Handlebar Installation
02
01
Put the handlebars in the slots Cover the lid, tighten the screw and install
the quick release part
02
01
Adjust the handlebars are in the proper position
and then lock the lever

Product Specification
Product Packing List
H100 includes the following:(please inspect and contact authorized
dealers or post sales support department to replace any missing items.)Model name H100
Product size Unfold:1660*600*1120MM,Fold: 1660*140*760cm
Max load 120kg
Top Speed 25km/h
Motor 36V*350W motor
Battery Lithium (36V/10Ah)
Tire
Front wheel 20” Pneumatic tire
Rear wheel 16” Pneumatic tire
Charging time 5-6 Hours
1
2
3
4
5
6
7
8
Specification Details
Charger Owner’s Manual
Installation tool &Screws
Scooter body Fender
14
07
/

02 Warning!
14
08
/Handle bar (Check to make sure the handle bar screws are not loose).
Front and rear brake (Be sure brakes are fully engaging).
Fender (Does not interfere with the tire).
Battery (Check to make sure battery is charged).
Tire (Check tires for damage, ensure properly inflated).
Front and rear wheels (Securely astened).
Motor (Operating roperly).

03 Safety Precautions!
14
09
/1.
2. Do notride with more than oneperson at any time.
3. Do not immerse scooter in water.
4.
5. Do not ride up or down stairs.
6.
7. Do not ride the scooter at night.
8. Wear proper footwear.
9. Do not use mobile phones while riding.
10.Be aware of your surroundings when riding the scooter.
11.
medicinal.

05 Maintenance!
·After using the tire for a long time, please replace the tire,which will
prolong the use of the bicycle.
14
10
/Your Electric Scooter should be regularly maintained.
1. Operating System: Some parts need to be lubricated.
·Brake rod (front rear)
·ire movement part brake material: refined steel
·Wire loop section
·Movable parts of accelerator
2. Brake: often for tear. f you find rust or
, or it is
3. Shaft: ubricate properly to the front wheel, gear crank and rear
wheel move smoothly.
4. Wire:
.
Tires
·Do not over-inflate
·

06 After Sale Service!
Summer is a season that makes it easy to puncture tires. Please be careful.
It is necessary to check the tires before putting the air in the tire.
Please check whether the tip gap is removed.
About Configurations
Due to mass production and different batches, please understand that the item
may not be the same as the
pictures in the brochure, but we guarantee that the changed parts will be
updated.
14
11
/Assembly
85% assembled, but
For safe , please check and test everything before . After
inspection and adjustment f there any , please contact your
.
Damage and Scratches
To avoid damage, foam and cardboard. If some
parts broken, please take some photos and
It is necessary to check the tires before putting the air in the tire.
··
·

07 Safety Recommendations
14
12
/
1.
your safety follow
in .
2.
isk of injury, to of unit .
cause loss of
balance.
3.
, an appropriate
4.
Always follow local laws. of rules
result in personal injury. We are not responsible for any injuries.
5.
, or

08 Daily Maintenance and storage
14
13
/.
a short circuit. he
battery may malfunction or can
ispose of batteries in accordance with local laws.
harge the battery after each use to prolong battery life.
Clean and Store Electric Scooter
If you find any stains on electric scooter housing, use a soft, damp
cloth to wipe the vehicle.
Warning: Do not use alcohol, gasoline, kerosene or other corrosive
solutions, volatile chemical solvents to clean the scooter. It will
cause serious damage to the scooter body. Do not wash electric
scooter with high pressure. Make sure the scooter is off before
washing and the plug cover is in the charging port otherwise you may
get an electric shock or cause serious damage.
When you are not using the scooter, store it in a cool, dry place. Leaving
the device in sun or in extremely high or low temperatures can cause a
reduced battery life.
Maintenance of Electric Scooter Battery

14
14
/within the scooter is not used, charge the and
in a cool, need to charge the
otherwise there is the of its failure, which is not
subject to
it will reduce the
charge scooter runs about of
a that stores about its charging-
discharging. are not charging the for a it can
cause serious for which it decreases the to charge
the again. of is not included
not the
as there is a of electric or as result
of a short circuit.
the , using a loosen
re-
feel the loose, loosen screw, the
tighten and increase a length of its tail. Re-tighten
screws.
Adjusting handle bars
Use loosen and tighten two screws near the folding
to adjust handle bars to desired setting.
not store the in with that
- degrees . the to deteriorate.
Do not leave the battery near fire.As a result of these actions may
deteriorate the battery,overheating and can even causeinflammation.
Table of contents