ALTEREGOBIKES ADRENALINEKICK X8 User manual

1. Safety Notes…………………………………………………………………………………………………… 3-5
2. Product Introduction ……………………………………………………………………………………… 6-10
3. How to ride……………………………………………………………………………………………………… 11-12
4. Battery Instruction…………………………………………………………………………………………… 13-14
5. Parameter ……………………………………………………………………………………………………… 15
6. Maintenance…………………………………………………………………………………………………… 16
7. Trouble shooting……………………………………………………………………………………………… 17
8. Packing List …………………………………………………………………………………………………… 17
9.Product Quality Certificate ……………………………………………………………………………… 18
About the manual Content
0201
● Thank you for choosing and purchasing an Adrenaline Kick X8 electric scooter!
● The manual introduces the safe operation instructions and precautions of the electric scooter.
Please read them carefully before using them for the first time. If it is not used according to the
manual, it may bring danger. Our company will not bear any responsibility for the personal injury or
property loss caused by it!
● For the safety, please read the manual carefully before use to ensure correct and safe driving!
● If you have any questions in the use process, or can not get the information you need from the
manual, please contact your dealer in time!
Please keep the manual properly for reference at any time!

-04-
wine
It is forbidden add goods on the pedal except the rider.
It is forbidden for many people to ride a scooter at the
same time.
Do not ride after drinking or taking medicine.
Do not ride on rainy days or over water roads
to avoid danger.
Do not ride on Vehicle road.
03
There’s risk for any vehicle, including e-scooter. For your safety, please learn to ride safely and obey the local rules
and enjoy the riding.
● Before riding the scooter, please check whether the fastening screws of the body are loose, and whether there are sharp
edges on the exterior decorations and movable parts, whether the brake, vertical lever folding buckle, front and rear
lights,and tire pressure are normal. If there is any abnormality, please stop riding and contact your dealer for repair!
● Please do not do anything that may harm other people or their properties with e-scooter.
● Any conversion of the e-scooter is prohibited as it will change its performance or damage the structure, which may
bring serious injury.
● Please do not put the electric scooter in the water, which will not only damage the electric scooter, but also cause a
safety accident.
● It is forbidden to attach any load to the handlebar, which will affect the stability of the vehicle.
● Avoid riding in areas with heavy traffic or overcrowded areas. Pay attention to giving way to pedestrians politely.
● Please don't lend the electric scooter to the user who hasn't read the manual to avoid accidents, because you have
the responsibility to ensure the safety of new users!
● Electric scooter is only for users over 14 years old!
● Electric scooter is only for personal use, not for acrobatics or extreme sports!
● Only accessories or spare parts certified by manufacturer can be used
for maintenance. Using spare parts not certified by manufacturer
may damage the vehicle or cause danger!
1.2 Safety Precautions
Please note that you may lose balance, crash or fall
down when you ride an e-scooter. To avoid injury,
you should be familiar with this manual and keep
the e-scooter in good condition.
Safety Notes
1.1 About safety
WARNING!
You must wear a helmet and protective gear before riding.

Lever
Disc brake
Battery cover lock
Brake Accelerator / Throttle
LED Display
Hook
Handle
Headlight
Battery
Folding ring
Folding spanner
Charging port
Motor
Kickstand
Tail lights
Fender
Anti-slip pedal
-06-- 05-
2.1 Overall View
Production Introduction
Do not park in the building foyer,
evacuation corridor or safety exit.
Do not call or listen to music
when you ride the e-scooter.
Be careful of the road with roadblock, sandstone,
ponding, mud, wet, ice and snow, slope (angle >15°)
stairs, dark area when you are riding.
After riding for a long time, the motor hub and disc
brake disc would be possible with high temperature.
Don't touch them directly to avoid scalding!

2.Fasten the folding spanner
and use the folder fixing ring
to fix the folder wrench.
Power
Fault display Multifunction
Speed
Gear
LED display
The unit display
LED Display Throttle button
Power switch
Function key
Brake handbar
-08-- 07-
Instructions of Buttons
1. Power Switch:Long press the power button to turn on/off.
2. Function key:
A: Short press the function key once: Cycle to switch gears.
Pedestrian mode: Gear indicator is not displayed. The pedestrian indicator flashes in breathing state.
Normal mode: Gear indicator shows white.
Sports mode: Gear indicator shows red.
B: Short press the function key twice: turn on / off the front and rear lights. When the front lights are on, the taillights
are always on.
3. Accelerator: Press the acceleration button to start and accelerate.
4. Brake:Hold the brake handle to brake. Lightly step on the rear fender to assist the brakes.
5. Cruise mode: after the constant speed cruise function is turned on, maintain the current vehicle speed for 6
seconds (vehicle speed ≥ 6km / h).Enter the cruise mode automatically, and exit the cruise mode when pressing
the acceleration dial again or holding the brake firmly.
2.2 Pre-assembly instructions
1.Pull up the lever while pressing
down the rear wheel fender.
3.Fix the brake lever with M5
hex wrench.
4.Tighten handlebars(Pay
attention to the direction of
rotation when tighten).
5.During riding , the fixed buckle
may be loose. At this time, just
need to adjust the screw with
clockwise.

1.Loosen the folder fixing ring.
2.Open the folder wrench.
-10-- 09-
2.4 How to uninstall / install the battery2.3 Folding chart
Install
Disassembly
1.Pull the lock on the
battery case.
2.Push the battery up
from the bottom.
3.After pushing the
battery up, then pull it
out horizontally.
2. Push down until the lock
latch of the battery box is
tightened.
1. Insert the battery
horizontally into the pole.
4.Align the hook with the hole of
the rear fender and press down.
3.Open the folder wrench and
lower the pole.

-12-- 11-
3.When the electric scooter starts to slide, the
other foot needs step on the pedal to keep stable riding.
How to ride the scooter
Please wear helmet, kneecap,
elbow-pad when you learn to ride the scooter.
1.Long-press the power button for 2seconds.
2.Stand on the pedal with single foot, press the
acceleration dial, and push the other foot backward.
7.Before getting familiar with the performance of the scooter,
please do not ride at high speed to avoid accidents and dangers.
6.When the scooter slows down and stops, put down
one foot and get off the scooter normally.
4.Continue to press the thumb shifter to speed
up, turn the grip to adjust the direction.
5.Hold the brake handle tightly to slow down and stop.
1.When riding in rainy and snowy days, the braking distance will be extended, so it is necessary to slow down;
2.When riding, please keep a proper speed and try not to brake in an emergency. When braking in an emergency, the
grip of the tire will be weakened, and the car may slip swing, and other dangerous situations, which will cause serious
injury to the rider!
Note

4.1 Battery Parameters
ParameterName
3 months (full charge)
7.8Ah/10Ah
2A
Store Time（-10℃-40℃）
Initial Volume
Max Charging Current
0℃-35℃
0℃-35℃
42V
Working Temperature
Charging Temperature
Max Charging Voltage
Li-ion battery
5-7 hours
36V
Parameter
Type
Charging Time
Voltage
Name ParameterName
Charging port
Battery interface
Battery Instruction
This is about how consumers charge and maintenance , also hereby listed the detailed spec of battery for your info,
please refer to this manual well and follow so as to keep long lifespan, performance for the battery.
4.2 Warning for battery
1.The battery must be charged and used within the temperature range required by the battery specification to make the electric scooter work
stably and efficiently.
2.Please make sure you take off the charger when you install the battery to prevent any danger from happening.
3.It is never allowed to dissolve or impale the battery, also make sure NO metal stuff go contact with the battery pin electrode, otherwise it might
break the battery .
4.It is forbidden to disassemble or pierce the battery pack casing to avoid short circuit caused by metal objects contacting the battery contacts,
otherwise it may cause battery damage or personal injury.
5.It is potentially causing fire or explosion if water entering battery circuit, thus stop using the battery in case this happening and go to the after
sale immediately.
6.You are only allowed to charge the battery with the original adaptor packed, otherwise it will be causing any unexpected consequence.
7.If finding the battery broken and smells bad or felt hot, you need to stop using and keep the battery away from other stuffs.
8.It helps prolong the lifespan if storing battery after 100% fully charged
9.It is not allowed to store the battery under -20°C or higher 50°C condition.
10.You have to charge it to at least 80% capacity if battery not used more than 30 days. Better to charge it 100% full every 90 days to protect the
battery function.
11.It will help prolong the battery lifespan significantly that you charge well accordingly to the manuals after every driving instead of running it out.
At room temperature, the battery can play a higher range and performance. But battery life and performance will degrade if used at
temperatures below 0℃. Typically, the range may be half or less than at room temperature at -10°C.
12.Do not charge and park electric scooters in residential buildings. Keep away from combustibles when charging, and the charging time should
not be too long.
1413
13.Improper disposal of used batteries may seriously pollute the environment. Please abide by local regulations when disposing of this battery.
When the internal temperature of the battery exceeds 50°C, the battery is in a protected state and cannot be charged.
After fully charged, the electric scooter exhausts its stored power after about 90-120 days of standby. If it is not charged in time, it may
cause damage to the battery due to excessive discharge. This damage is unrecoverable and it is beyond of our warranty.
Charging method:
4.3 Charging step
● Open the charging port cover, Make sure the charging port is clean and dry.
● Connect the charger with the battery and the other end with power(100V-240V;50/60Hz), make sure the charging indicator is on.
● When the indicator light on the charger changes, indicating that the charging process is normal, otherwise check if the line connection is good.
● When the indicator on the charger has color change, it indicates that the battery has been filled to 99%, Please stop charging; long time over
charge will affect the battery life.
Tips:
Remove the battery to open the silicone charging port, plug the charger DC plug into the battery charging port; plug the power cord into
the charger, then connect the other port to the socket (100V-240V; 50/60Hz), and confirm the charger indicator is on normally.
Cover the charging port with the anti-dust cap in case some metal may touch the charging port and bring
short-circuit after charging finished.

-16-- 15-
10 inch
1083*401*1186mm
1083*401*460mm
115mm
15kg
36V/7.8Ah or 10Ah
36V/350W
30-45km
25km/h
100kg
15°
100-240V
50-60Hz
42V
2A
-10℃-35℃
Input voltage
Frequency
Output voltage
Output current
Store temperature
Capacity
Moto power
Mileage per charge
Max speed
Max loading
Climbing angle
Unfolded size
Folded size
Height from pedal to ground
Net weight
Item
Product
Maintenance
Specification
Maintenance considerations：
● Make sure the electric scooter charger and charging line are disconnected and ensure that the electric scooter is off.
● Wipe the shell with a soft cloth to clean the electric scooter. Please don’t put more lubricating oil on bearing when you
do the maintenance for it.
● It is recommended to check the tire pressure before driving to ensure driving safety.
Tire pressure standard: 320kpa ~ 340kpa.
● Please check the brake system and tire are vulnerable parts at least once a month. When the brake performance and
tire grip are reduced, please contact the dealer to replace the corresponding parts.
● Please do not replace the accessories which not provided by manufacturer without permission, to avoid the safety
hazard caused by the inconsistency for accessories with the scooter.
● It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause permanent damage
of the electronic devices in the host.
● In order to protect the user's safety, the user can not take apart the electric scooter, otherwise, the user will give up the
maintenance warranty rights of the product automatically.
Storage
● Please charge your electric scooter before storage, for preventing the battery from discharging too long time.
Please ensure charge at least once every three months.
● If the storage environment temperature is lower than 0 ℃, please don't charge electric scooter. Please put it in inside
environment temperature (above 10 ℃) and then charge, storage temperature is - 10 ℃ to 35 ℃.
● Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You can mask the electric
scooter to prevent from the dust.

-17-
Electric scooter packing list：
X8 E-scooter: 1PC
Charger: 1PC
Manual: 1PC
Screws & Wrench: 1set
Solution
Check to see if the battery is powered
Check the bluetooth switch whether turn on.
Description of adverse phenomena
unable starting up
No horn、no blue tooth signal
Trouble shooting
Please contact the sales office or the dealer with no hesitate for repair when the electric scooter fails to ride normally.
Packing List
1. Check whether the plugboard has electricity;
2. Check the charger whether connect AC plug (the light whether is on);
3. Check the plug of the charger and the charging port of the
whole scooter have been inserted correctly.
can not charge