ecobox Ecoboxx 1500 User manual

Solar Portable Generator
User Manual
VDE
SAA
UK
SABS

1
Read this User Manual carefully before use
Safety
1. Follow the instruction to connect the product with battery
2. Never alter or remove the factory plates and identification labels.
3 .Keep children away from the systems.
4. Never open the device. If maintenance on the unit is required, please contact the nearest
service center.
1. INTRODUCTIOIN
ECOBOXX 1500 is a solar portable generator, designed in Italy and assembled in China, by
ProVista Technology Ltd.
This unit allows users to use the power anywhere, for camping, outing, entertainment, lighting, or
emergency use.
Ecoboxx 1500 is with built-in
20Amp MPPT Solar charge controller for maximal capture of clean solar energy
230Vac, 1500W True sine wave inverter to power up home appliances such as fan, TV,
micro oven, refrigerator and electric tools such as electric drill and saw, etc. The inverter is
with 1,500 watt power continuously.
USB5V and DC12V output to power devices, such as phone, tablet and lighting.
Power monitor meter on LCD display to monitor power consumption
Protection:
Overload protection, short circuit protection, under voltage and overvoltage protection and
overcurrent protection are fully implemented

2
1.1 Open the box
ECOBOXX 1500 main unit x 1
Wall Mount System x 1kit
PV connection cable LED lamp
AC/DC Adapter (16V, 5A)
Battery connection cable

3
1.2 Solar portable generator-- ECOBOXX 1500
Front View
Back View
side View
Index
Output Port
C: USB output: 5V, 1500mA (Max.)
D: DC Power output: 12V, 33A (Max.)
E: DC Power output:
C garette Socket: 12V, 10A (Max.)
DC jack (6.0mm): 12V, 6A(Max.)
B: AC output: 230V ac, 1500W
Remark: All type of the sockets available, such
as, Australia, UK, Schuko, US and Universal
socket. Contact your distributor for detail
Input port:
A: Solar nput port
A2: AC/DC adaptor nput port
Battery connection cable port:
Front Panel
Master
Power
A2

4
2. Get Start
2.1 Battery connection
2.1.1 Prepare a 12V 100AH AGM Lead Acid battery (consult your distributor for
battery detail)
2.1.2 Connect to the O-ring of the Battery Connection Cable with battery. Make
sure the Red Cable is connecting to the Positive pole of battery and the Black
Cable is connecting to the negative pole of battery.
2.1.3. Plug in the Battery Connection Cable into the socket on the back of unit.
Back View

5
2.2 Charging
Plug in the AC/DC adaptor into “A2” port to charge the battery overnight until
the battery is fully charged.
The charging LED lamp on the front panel will be ON.
The power “INPUT” indicator and the power meter will be shown on the LCD
display when the master POWER Switch is ON.

6
Or charge by solar panel as below connection guide:
2.3 LCD Display

7
A: Input status: INPUT or NO INPUT
B ： Input charging power meter.(in Watt)
C ： Battery level: “FULL” means the battery is fully charged, and “20” means Battery very low,
please charge the Battery
D ： Battery wrong or dead Alert: Check the battery or change a new battery
E ： Battery is deep-discharged.
F ： The operation temperature is too high, and the unit is under protection.
G ： AC output overload protection is ON
H ： Output power meter ( including the AC and DC load)
2.4 Power Output
A: Master “POWER” Switch: Turn on Master POWER Switch to start. The LCD will be ON.
B: ”DISPLAY” button: Press DISPLAY button to turn on LCD display backlight. It will last 5
minutes.
C: “AC” output Button: Press “AC” button to feed power to AC sockets. Plug in AC device to
power it up.
“AC” output button LED (green) to show AC power available. When AC output is overload or
abnormal, the LED flashes red, it goes off 3 minutes later. Push the AC button again to restart
the AC output power supply.

8
D: ”USB” output Button: Press “USB” button to feed power to USB sockets. Plug in USB device
to power it up.
“USB” output button LED (green) to show USB power available. When USB output is overload or
abnormal, the LED flashes red, it goes off 3 minutes later. Push the USB button again to restart
the USB output power supply.
E: “12V” High power Button: Press “12V” button to feed power to 12V high power sockets. Plug
in 12V device to power it up.
“12V” output button LED (green) to show 12V high power available. When 12V High power
output is overload or abnormal, the LED flashes red, it goes off 3 minutes later. Push the 12V
high power button again to restart the 12V output power supply.
F: ”12V” Low power Button: Press “12V” button to feed power to 12V sockets. Plug in 12V device
to power it up.
“12V” output button LED (green) to show 12V power available. When 12V power output is
overload or abnormal, the LED flashes red, it goes off 3 minutes later. Push the 12V power
button again to restart the 12V output power supply.
G: Charging LED indicator: it flashes green during charging, and solid green after fully charged. It
is off when no input.

9
3. WALL MOUNTING
Please refer to the mounting instruction manual
PRODUCT FEATURES
Power Input
Solar panels
65Wp x 2pcs(10hr to full charge 100Ah battery)
AC adapter 5A power adapter(20hr to full charge 100Ah battery)
Suggested battery 12V dc,100AH, AGM lead Acid battery
Power
Outputs
1)DC
1. 5V USB 1.5A x3
2. 12V DC socket (6.6A) x2
3. Cig. Socket(10A)
4. 12V 33A Anderson port
2)AC
AC socket x 2
for SAA,BS,VDE,Schuko,US,Universal,etc.
Inverter 230V ac，1500W True sine wave inverter
MPPT
20Amp MPPT charge controller with efficiency more
than 99%

Waste electrical products should not be disposed with household waste
Please recycle where facilities exist
Check with your local authority or retailer for recycling advice
Specifications are subject to change without prior notice
Copyright reserved by ProVista Technology Limited
Version of Instruction manual 1.0