Lifetech mitouch User manual

Getting started
Remove the mitouch device
from the packaging.
Attaching the pads
Attach the adhesive electrode
pads to the press stud connectors
on the treatment lead (x2).
Placement of the pads
Remove the plastic protectors from
the electrode pads and place pads
onto the skin, spanning the desired
treatment area. Pads should be placed
at least 6cm (2.3”) apart, either side of
the affected area. (Examples 1 & 2).
Charging
Plug the USB charging cable into
the charging port of the device.
Charging indicator
Connect the charging cable to
a USB charging source.
Charge until the battery
indicator shows full.
Attaching the leads
Insert treatment lead into Port Awhen
using 2 electrode pads.
Insert treatment leads into Port Aand
Port Bwhen using 4 electrode pads.
6Turning ON
Press and hold ON/OFF button until
device turns on.
7
mitouch
QUICK START GUIDE

Selecting a mode
Using the touchscreen
press an icon to select
the desired mode.
8Selecting a treatment
Press the mode icon again to
move through treatment options
1, 2, 3 & 4. When using mc² mode
there is no need to select a
treatment option.
9Adjust intensity
If using Port A, use the A
intensity button on the left
hand side of the device to
increase or decrease the
intensity of the treatment.
If using Port B, use the B
intensity button on the right.
There are 10 intensity levels.
Intensity defaults to zero at the
start of each treatment and
will not increase unless pads
are connected.
10
Treatment time
Press the timer icon on the touchscreen
to set desired treatment time (10 mins
increments up to 60 mins).
Pausing treatment
Briey press the On/Off button
to pause the treatment.
Press again to resume.
11 12
14 Turning OFF
Press button to manually turn OFF
the mitouch.
Screen lock
To lock the screen during treatment,
press the button to lock and unlock.
13
mitouch
QUICK START GUIDE

MODES PAIN PAIN+ RECOVER PERFORM MICROCURRENT
(mc²)
What does
it do?
Manages pain
signals, and pain
pathway intervention.
Pain mode with
additional benefits
for relief and
management of
painful inflammatory
conditions or where
deeper stimulation
may be required.
Massage sensation
and body activation
designed to relax
muscles, improve
circulation, speed
up recovery &
rehabilitation
processes and
improve muscle
strength & condition.
Stimulate and
strengthen muscles,
maximise muscle
fibre activation during
exercise. Stimulate
nerves and tissue
around joints, and
warm-up specific
muscle groups
before activity.
mc² microcurrent
helps the body’s
repair process
by restoring and
normalising cell
current, which
can be negatively
affected by injury
or inflammation.
Uses Chronic and acute
pain, aches, back
pain, neck pain,
muscle pain, sports
injuries, sprains,
strains and post-
operative pain.
Pain symptoms of
neck, back, joints,
muscle groups etc.
Symptoms of arthritis,
fibromyalgia, sciatica.
Muscle spasm.
Massage, relaxation,
post exercise to
reduce effects of
DOMS (Delayed
Onset Muscle
Soreness), recovery
and rehabilitation.
Getting the most
from your workout -
gain strength, speed,
power and range of
motion. Prevention of
muscle wastage from
aging or inactivity.
Rehabilitation
and coordination
retraining.
Musculoskeletal
injuries, inflammation,
wound healing and
soft tissue injuries,
post exercise relief of
DOMS (Delayed Onset
Muscle Soreness).
Complimentary
or stand alone
treatment to
the other
mitouch modes.
Treatments 4444 1
ON/OFF Button
APort
BPort
AIntensity Button
BIntensity Button
Pause Button
Lock/Unlock Button
Charging Port Micro USB
Treatment Time
Pause Indicator
Screen Lock Indicator
Battery Level Indicator
Treatment Mode (Pain, Pain+, MC² , Perform & Recovery)
Settings (1) (2) (3) (4)
Connectivity Indicator (mc² only)
AIntensity Indicator
BIntensity Indicator
mitouch TREATMENT MODES EXPLAINED
For best results, explore each mode and experiment with what works best for you.
For more information, tutorials, FAQs and more
scan the QR code or visit nurokor.co.uk