ECOLOCITY Ribbon Star Flex LED Strip Light User manual
Ribbon Star Flex LED Strip Light - 12VDC
SKU: RL-SC-RSF
EcolocityLED.com
info@EcolocityLED.com
775-636-6060
255 Distribution Dr. #104
Sparks, NV 89441, USA
ECOLOCITYLED.COM
775-636-6060
!
12VDC12VDC
3M VHB
3M VHB
3M VHB
3M VHB
3M VHB
3M VHB
3M VHB
3M VHB
120VAC
Use 12VDC Input Only!
DO NOT use AC Input!
WARNING – This product should be
installed, cut and connected only by a
This product is not designed to be
NEVER cut, connect, or join wires while
product is connected to a live power
DO NOT bend or crease the strip in a
manner that will damage the conduc-
BE CERTAIN your 12VDC source and
+
-
+
-+
-
+
-+
-
+
-
12VDC
16.5mm
1.97” (5cm) Cut Lines
0.32”
(8mm)
TOP SMD
LED 3528
Copper Pads
for Connections.
Connections can be made
at any point strip light.
Never cut outside
of cut lines!!
Product SKU :
LED Size :
Input Power :
RL-SC-RSF
3528 SMD
Input Power: 12VDC Constant Voltage
Power supply equa�on
X * 1.46 = Y
X = linear strip light footage
Y = minimum transformer waage
DC +
DC -
22AWG Stranded Wire
EcolocityLED.com
info@EcolocityLED.com
775-636-6060
T0 NEXT 20FT
+
-
+
-+
-
+
-+
-
+
-+
-
+
-+
-
+
-+
-
+
-
118” (3m)
12VDC
POWER SUPPLY T0 110-220VAC
+
-
+
-+
-
+
-+
-
+
-+
-
+
-+
-
+
-+
-
+
-
30 feet +
-
+
-+
-
+
-+
-
+
-
+
-
+
-+
-
+
-+
-
+
-
+
-
+
-+
-
+
-+
-
+
-
+
-
+
-+
-
+
-+
-
+
-
30 feet
12VDC
POWER SUPPLY T0 110-220VAC * Wire Guage must be thick
enough to carry power load *
T0 NEXT 30FT
+
-
+
-+
-
+
-+
-
+
-+
-
+
-+
-
+
-+
-
+
-
DC 12-24V. 8A
OFF ON
DIMMER
IN
V- V+ V+ V-
OUT
118” (3m)
12VDC
POWER SUPPLY T0 110-220VAC
12VDC
PWM LED Dimmer
Ribbon Star Flex LED Strip Light - 12VDC
SKU: RL-SC-RSF
REQUIRED SUPPLIES OPTIONAL SUPPLIES
OR
Stranded Wire and
pg. 2 of 3
1.) Clean Mounting Surface
2.) Connect Transformer
NEUTRALNEUTRAL
LOAD
GROUND
3.) Connect Strip Lights
+
-
+
-
4.) Test and Mount Strip Lights
Always test your strip lights
before adhering the 3M
double sided tape. Never test
the strip light when rolled
inside the plastic reel.
+
-
+
-
EcolocityLED.com
info@EcolocityLED.com
775-636-6060
Ribbon Star Flex LED Strip Light - 12VDC
SKU: RL-SC-RSF
REQUIRED SUPPLIES OPTIONAL SUPPLIES
Electrical Solder
pg. 3 of 3
1.) Strip and Tin Wire
2.) Tin Strip Light Pads
+
-
+
-
3.) Solder Wire to Strip
+
-
+
-
4.) Test and Heat Shrink
+
-
+
-
1.) Gently Pull Tab
2.) Insert Strip Light
+
-
+
-
3.) Push Back Tabs
+
-
+
-
4.) Test your Connection
+
-
+
-
Stranded Wire and
Strip Light
Quick Connectors
12VDC Power Supplies PWM LED Dimmers Aluminum Extrusions
and Covers
12VDC Power Supplies - http://www.ecolocityled.com/category/led_power_supplies_12v
PWM LED Dimmers - http://www.ecolocityled.com/category/pwm_led_light_dimmer
22AWG Connec�on Wire - http://www.ecolocityled.com/product/22_gauge_bonded_pair_dc_wire
Aluminum Extrusions - http://www.ecolocityled.com/category/led_aluminum_extrusions
Strip Light Soldering Guide - http://www.ecolocityled.com/category/led_tutorials_dc_solder
DC-
DC+
Table of contents
Other ECOLOCITY Lighting Equipment manuals
Popular Lighting Equipment manuals by other brands
EUROM
EUROM Sunrise 2500 instruction manual
Black & Decker
Black & Decker LEDUC9-1CCT-ACK user guide
Clas Ohlson
Clas Ohlson 413.360 quick start guide
MJ LED LIGHTNING
MJ LED LIGHTNING MJ-B380 user manual
Larson Electronics
Larson Electronics GAU-EMG-2X2W-8H instruction manual
Spotlight
Spotlight MIDI FRESNEL CDM 250W user manual
