Fomei FY3119 User manual

CONTINUOUS LIGHT
LED RING WIFI SMD 32W
USER MANUAL
FY3119

WWW.FOMEI.COM
LED RING WIFI SMD 32W
Welcome to the Fomei products
owners family!
Before first use, read this manual first.
If you have any questions, fell free to contact us:
E-mail: [email protected]
Website: www.fomei.com
Warning before use:
1. Make sure that the product is intact and that there are no missing parts.
2. In case of damage, contact a professional service FOMEI.
3. Keep the environment dry and ventilated when using the product.
4. For the best performance of the product, keep the product clean by clean.
5. Do not scratch or apply pressure to the product.
Safety warning:
1. Keep this product out of reach the rain or humidity to avoid damage or injury.
2. Do not disassemble the product. In case of damage contact a service FOMEI or contractual
service with trained professionals.
3. If the product is disassembled, you will not be covered under warranty.
4. Do not use the product in extreme temperatures (+ 50C).
5. The product is not suitable for children.
6. Do not plug/unplug when the power is still connected.
7. Do not burden light more than necessary.
RECYCLING
This product contains electronic parts. Do not throw it into the rubbish bin, take it to the electro-
nic recyclation facility. Please, protect our planet.

WWW.FOMEI.COM
LED RING WIFI SMD 32W
TABLE OF CONTENT
A. PRODUCT OVERVIEW
B. ABOUT PRODUCT
C. FIRST STEPS WITH PRODUCT
D. TECHNICAL INFORMATIONS
E. OTHER FOMEI PRODUCTS

WWW.FOMEI.COM
LED RING WIFI SMD 32W
7.
7. Power connector
8. Power button (Battery-O-AC)
9. INFO display
10. Reset
11. Control knob
A. PRODUCT OVERVIEW
1. Battery lock
2. Battery slot
3. Camera fixation knob
4. Fixation knob
5. Camera holder
6. Control panel
3. 2.
1.
4.
5.
6.
8.
9.
10.
11.

WWW.FOMEI.COM
LED RING WIFI SMD 32W
B. ABOUT PRODUCT
The LED Ring is great in situations where you want to capture the subject in a beautiful,
natural way. It can be used as a light for portraits, beautyshoots, product photography and
food. When capturing portraits, this ring creates a beautiful circular reflection in the eyes. It is
compatible with all types of tripods, thanks to 1/4“ and 3/8“ screw thread. It also could be used
wherever you want, because of two NP batteries.
Package contains
FY3419 Fomei LED RING WIFI SMD 32W
Transportation bag
AC adapter
Camera holder
DOES NOT CONTAIN BATTERY.
Recommended accessories:
2x FY4325 NP-750 Battery / 2x FY3573 NP-960 Battery
FY4324 Charger for NP-750/NP-960
C. FIRST STEPS
Battery installation
Insert the batery into the holder. If you hear „click“, battery is fixed in position. For battery remo-
val, press the battery lock and remove the battery from holder.
Power ON/OFF
Before turning it on, be sure that the light is o.
If you want use battery, switch controler to „BATTERY“. If you want to use ac adapter, swithc to
the „CABLE“. For power o switch to the „OFF“ position.
Brightness adjustment
Brightness is being adjusted by pressing control knob twice.
Color adjustment
Color temperature is being adjusted by pressing control knob once.
WIFI connection
Single Light mode: Search the WiFi network “LEDSxxxx” on your mobile phone and enter password:
candlehome to connect. Enter the WiFi app and the connected light should appear on the control screen.
Multi light mode: A router is needed for multi-lights connection. Enter WiFi connection of the smartphone
and connect to a password protected router. Enter app and then to enter router setting and type pass-
word for your wifi. Then press the control knob at the back of the LED light for 3 seconds. LED indicating
light will twinkle rapidly and please release the button now. (Please also do the same procedure for other
LED lights). After 5 - 20 seconds, the indicating light stops twinkling. After that, light is connected. Please
start from the begining if connection fails.
iOS app: Android app:

WWW.FOMEI.COM
LED RING WIFI SMD 32W
LED WIFI 210B
FY3473
LED WIFI 750F
FY3479
LED WIFI 150D
FY3468

WWW.FOMEI.COM
LED RING WIFI SMD 32W
D. TECHNICAL INFORMATION
Power 32W
LUX (5600K) 0,5/1320, 1m/429, 2m/121
CRI 95
Light angle 45O
Power adjustment 0-100%
LED Diods 160x
Flicker free Yes
Color temperature 3000K - 5600K
RF receiver Yes, WIFI
AC adaptor Yes
Weight 1,5 kg
E. OTHER FOMEI PRODUCTS
LED WIFI 100B
FY3494
LED WIFI 160FB
FY3415
LED WIFI 240 RGBW
FY3569

FOMEI s.r.o.
Machkova 587
500 11 Hradec Králové
[email protected]
www.fomei.com
FOMEI Slovakia s.r.o
Za Kasárňou 1
831 03 Bratislava
[email protected]
www.fomei.sk
FOMEI Servis
Tel.: [phone]
E-mail: ser[email protected]