Regulatory Guide
Limited Warranty for EcoQube Pro Lease Program
Overview
This Limited Warranty is provided by Ecosense ("the Company") and
covers certain aspects of the EcoQube Pro (“Product” or “product”)
leased under EcoQube Pro Lease Program ("the Program"). This
warranty is only valid for the original lessee ("the Lessee") of the
Product(s) or Property leased (“the Leased Product)
Coverage Period
This Limited Warranty covers the Leased Product for a period of [e.g.,
12 months] from the date of the commencement of the lease agree-
ment, unless otherwise stated in the individual lease contract.
What is Covered
This Limited Warranty covers all mechanical and electrical faults of the
Leased Product occurring through normal use of the product. The
Company, at its sole discretion, will repair or replace the faulty product
or component at no charge to the Lessee.
What is Not Covered
This Limited Warranty does not cover damage to the Leased Product
resulting from misuse, abuse, accidents, unauthorized repair, modifica-
tions, natural disasters, etc., or any issues related to wear and tear,
aesthetics, or cosmetic damages.
Claim Process
To make a warranty claim, the Lessee should contact the Company's
customer service department via email or phone within the coverage
period and provide a detailed explanation and evidence of the fault or
issue.
Disclaimer
This Limited Warranty gives the Lessee specific legal rights, and the
Lessee may also have other rights which vary from state to state. The
Company does not assume any liability for consequential or incidental
damages, so the above limitations or exclusions may not apply to the
Lessee. This Limited Warranty is in lieu of all other express warranties.
Any warranty of merchantability or fitness for a particular purpose is
limited to the duration of this Limited Warranty.
Safety and Maintenance
The Ecosense EcoQube Pro (‘Product’ or ‘product’) is intended for
indoor use only. Avoid direct exposure to sunlight for long periods of
time. Avoid exposure to direct heat sources. For correct usage, make
sure the Product is operating in the specified temperature range (see
technical specifications in the User Guide or visit www.ecosense.io).
Exposure to high humidity might permanently alter the product
sensitivity or damage the Product. Do not disassemble. If the Product
does not work as specified, please contact your local dealer or visit us
at www.ecosense.io.
Use a dry cloth to clean the Product.
Disposal: electronic equipment.
Regulatory Compliance USA
Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the
Product.
This Product complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This Product may not cause
harmful interference, and (2) this Product must accept any interference
received, including interference that may cause undesired operation.
This Product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This Product generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this Product does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the Product and receiver.
—Connect the Product into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Safety
This Product is a radio transmitter and receiver.
It is designed not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the USA Federal Communications
Commission.
The antenna must be installed and operated with a minimum distance
of 8 inches (20 cm) between the radiator and your body.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Power Supply
The Product (Model EQ200) contains a power supply tested according
to the following standards: UL62368-1(for US adapter)
Model Description
EcoQube Pro (Model: EQ200)
FCC ID: 2AC7Z-ESP32WROOM32E
Model EQ200 includes Bluetooth and 802.11b/g/n (2.4GHz) Wi-Fi
ISM Frequency Bands and Output Power
Frequency Range:
2412MHz – 2462MHz (HT20) (Wi-Fi 802.11b/g/n)
2422MHz – 2452MHz (HT40) (Wi-Fi 802.11n)
2402MHz – 2480MHz (Bluetooth)
Output power:
<100mW (Wi-Fi)
<8mW (BLE)
