ecoStage 4x32W CW-WW LED User manual
Ⅰ.Checking before using
No.
Item
Quantity
Unit
1
32W 4Head Moving Head
1
Piece
2
hanging bracket
2
Piece
3
Power cable
1
Piece
4
User manual
1
Piece
5
Hook
Optional
6
Safe wire
7
DMX cable
★For security reasons and in accordance with the terms,reassemble or modify the
product is not allowed without permission. Please note that due to human damage
caused by improper use of the product,will break the warranty qualification.
Moreover, the unprofessional operation may lead to short circuits, burns or
electric shock, and so on.
★This device has been full inspection before shipping. For your safety, please
operate it according the User Manual.
★If any damage caused by improper operation will result in the termination of the
warranty claims. The manufacturer does not accept any responsibility of property
damage due to improper operation or personal injury due to non-compliance
with the operating instructions.
★Keep the manual in a safe place for future reference as well as after the product
sale,lease,etc..
★Note: Based on product improvements,specification may change without
notice.Changes in product specifications related rights will be reserved.
Ⅱ. Safety Instruction
Ⅸ.Product maintenance and cleaning
Please note the following information when testing this product:
★All the screws and components of the installation must be tightly connected;
★The housing,lens,static parts and installation site can not be deformed;
★Any abrasion on power cable is unacceptable.
★The installation and use of the product must be carried out by a trained
★professional and technical person, must ensure that the exclusion of security
risks.
Notice:Power OFF before maintenance!
It is important to keep the fixture clean, not only to keep the light output at
maximum brightness, but also to extend its service life. It is recommended to use
high-quality professional glass cleaner and a soft cloth to clean, any alcohol or
chemical solvents is not allowed during the cleaning.The inside of the lamp and
the fan should be cleaned by vacuum cleaner at least one time quarterly.
23
000
-
199
No function
200
-
209
Reset(Stay 3 seconds)
210
-
240
No function
241
-
255
Sound control mode
Attached list 4: LED color select details
Value
Function
LED color
000
-
007
No function
008
-
090
WW
091
-
173
CW
174
-
255
WW+CW
Ⅷ.Product specification
Item
Specification
LED color
CW/WW
LED quantity
4 pieces
LED Power
32W
LED Dimmer
0-100% linear dimmer
DMX socket
3pin DMX(DMX+.DMX-.Ground)
DMX address
DMX512
Channel
2Chan/16Chan/23Chan
Function
Show mode,Sound active mode,DMX512 mode,DMX
static color mode,DMX strobe function,easy control
Rotation angle
DMX X axis angle 540°,Y axis 180°
Sound active X axis unlimited rotation
Voltage
AC100-240V/50-60Hz
Fuse
F3AL250V(5×20mm)
Power consumption
100W
Power factor
0.969PF
Currency
0.439A
LED Currency
(1 meter)
WW 20000Lux(2pcs)
CW 38000Lux(2pcs)
1. When opening the packing, take all accessories out, and remove the light to a
horizontal table for good operation. First check whether the accessories are
complete, then check carefully whether the whole light has no damage. If there is
any damage, please contact us as soon as possible.
2. AC Power:Check whether the local power supply is accordance with the
requirements of the product rated voltage.
3. The product is only suitable for indoor working environment. The light should
keep dry, keep away from wet, overheat or dusty environment. Don't come into
contact with water and other liquids to prevent or reduce the risk of electric shock
or fire.
4. Please do not install the light directly on the surface of the combustible
substance.
5. The people who install, operate and maintain of light professional certificate
required.
6. When there are faults of the light, please stop using the light immediately. Don't
try to repair, please contact the nearest authorized technical assistance center, if
the parts damage, always use the same type of parts replaced.
7. Don't touch any electrical wiring in the process of operation to prevent the risk
of electric shock.
8. To make sure the light working environment temperature, the highest do not
exceed 40℃，the lowest do not exceed - 20 ℃.
9. Under the stable cooling working situation, the highest temperature of the
housing of the light can reach 80 ℃, please do not touch.
10. The light is design according to the type of electric shock protection. The light
should be use in good connection grounding power system and the
earth sign port of the light should be connected to the installing fixtures.
11. Do not use the damage of the insulating layer wire and also do not use the
power cord overlap on the other wire. When not in use or clean the light, please
disconnect the power, don't pull the plug in hard or just drag the wires.
12. There are no components inside for maintenance. Before start operation the
light, please check whether all of the shell is installed. In the case of the shell
open used the light is prohibited.
Note: Under any installation, maintenance and clean the light, please confirm that
has cut off the power cord!
Ⅲ. LED Display
Item
No.
Text
Function
Button:
①
MENU
Enter setting menu
②
Next menu
③
Last menu
④
ENTER
Confirm
LED:
⑤
DMX
Flash
DMX mode
⑥
SLAVE
Flash
Slave mode
⑦
MASTER
Flash
Master mode
⑧
SOUND
Flash
Sound control mode
Ⅳ. Menu Instruction
Choose a function, press MENU button, choose the menu. Press
ENTER button enter the chosen function, LED display strobe, then
press UP/DOWN button to choose the function, press ENTER button to
confirm. Or wait for 10 seconds or press the MENU long time, then
could enter the main mode.
Main Function as follows:
Attached list 3: 23CH mode
CH
Value
Function
1
000
-
255
Pan 540°adjust
2
000
-
255
Pan rotation speed, fast to slow
3
000
-
255
Pan fine
4
000
-
049
Pan no function
050
-
149
Pan anticlockwise rotation, fast to slow
150
-
155
Pan stop
156
-
255
Pan clockwise rotation, slow to fast
5
000
-
255
Dimmer, 0-100%
6
000
-
007
LED on
008
-
015
LED off
016
-
131
LED Strobe,slow to fast
132
-
139
LED shutter open
140
-
181
Slow off,quick on, effect speed slow to fast
182
-
189
LED shutter open
190
-
231
Quick off,slow on,effect speed slow to fast
232
-
239
LED shutter open
240
-
247
Random strobe
248
-
255
LED on
7
000
-
255
Y1 axis 180°adjust
8
000
-
255
Y1 axis fine adjust
9
000
-
255
Y1motor speed, fast to slow
10
000
-
255
LED1 color select
11
000
-
255
Y2 axis 180°adjust
12
000
-
255
Y2 axis fine adjust
13
000
-
255
Y2 motor speed, fast to slow
14
000
-
255
LED2 color select
15
000
-
255
Y3 axis 180°adjust
16
000
-
255
Y3 axis fine adjust
17
000
-
255
Y3 motor speed, fast to slow
18
000
255
LED3 color select
19
000
-
255
Y4 axis adjust
20
000
-
255
Y4 axis fine adjust
21
000
-
255
Y4 motor speed, fast to slow
22
000
-
255
LED4 color select
Attached list 2: 16CH mode
CH
Value
Function
1
000
-
255
Pan 540°adjust
2
000
-
255
Pan rotation speed, fast to slow
3
000
-
255
Pan fine
4
000
-
049
Pan no function
050
-
149
Pan anticlockwise ration, fast to slow
150
-
155
Pan stop running
156
-
255
Pan clockwise ration, slow to fast
5
000
-
255
LED dimmer, 0-100%
6
000
-
007
LED on
008
-
015
LED off
016
-
131
LED strobe,slow to fast
132
-
139
LED shutter open
140
-
181
Slow off,quick on, effect speed slow to fast
182
-
189
LED shutter open
190
-
231
Quick off,slow on,effect speed slow to fast
232
-
239
LED shutter open
240
-
247
LED Random strobe
248
-
255
LED on
7
000
-
255
Y1 axis 180°adjust
8
000
-
255
LED1 color select
9
000
-
255
Y2 axis 180°adjust
10
000
-
255
LED2 color select
11
000
-
255
Y3 axis adjust
12
000
-
255
LED3 color select
13
000
-
255
Y4 axis 180°adjust
14
000
-
255
LED4 color select
15
000
-
007
No function
008
-
247
Show mode 1-16
248
-
255
Sound control mode
16
000
-
199
Show speed, slow to fast
200
-
209
Reset
210
-
240
Keep fastest speed
241
-
255
Sound control mode
Menu
Submenu
Detail
DMX Address
001--512
DMX address
Channel Mode
DMX 2Ch
Channel mode
DMX 16Ch
DMX 23Ch
Ⅴ. How to operation
1. Master/slave mode to control.
Slave Mode
Master
Master mode
Slave 1
Slave 1
Slave 2
Slave 2
Show Mode
Show 0
Random show mode
Show 1
show mode 1
↓
↓
Show 16
show mode 16
Sound State
On
Sound active on
Off
Sound active off
Sound Sense
0-100
Sound sensitivity
Back Light
On
Display on
Off
Display off
Pan Inverse
No
Pan direction
Under DMX
mode
Yes
Pan reverse direction
Tilt Inverse
No
Tilt direction
Yes
Tilt reverse direction
Auto Test
Test
Self test
Fixture Time
0-99999
Working time
Firmware Version
CPUA Ver 010
Software Version
CPUB Ver 010
CPUC Ver 010
Reset
MS-MF4-FC
Reset
2. DMX controller
Master/slave mode to control
Connect the lights in series, the first way, the lights are automatically
as the master and slave lights.After that, master-slave lights will work.
In the second way, the first light control the other light auto show and
sound control show and so on. This function is suitable for instant performance
mode. The first light must be set to master mode, through press "Slave Mode"
to enter, select "Master" and select "Show Mode" same time. Now show mode,
0-16 can be arbitrarily selected. The second light and the above programs
choose to press "Slave Mode" to enter, select "Slave 1" (as the master light) or
"Slave 2" (as the master light) mode.
Ⅵ. How to DMX control
If control by DMX controller, then you need to set the address code to control
the light, the address code value is 1-512, the light could receive the signal
accordingly.
Press MENU button，select menu, press ENTER button，address will
strobe. Use UP /DOWN to select DMX512 address. After address ensure，press
ENTER button，until address stop strobe, After 8 seconds will return the menu. If
return the former but not change, press the menu button. If want to control many
light at the same time, please link them by DMX cable one by one. Picture as
below.
During the installation, if the signal line is too long, or in relatively noisy
electrical environments, such as dance halls, we recommend using DMX
terminator (circuit connection). It can avoided the control signal turbidity due to
electrical noise. DMX terminal is connected by a simple XLR head (2-pin and
3-pin) connecting a 120Ω resistor,please set the terminal into the final device
output port, please refer to the diagram.
Ⅶ. Chanel mode instruction(choose default
address code)
Attached list 1: 2CH mode
2CH
Value
Function
1
000
-
007
No function
008
-
022
1
Show mode
023
-
037
2
038
-
052
3
053
-
067
4
068
-
082
5
083
-
097
6
098
-
112
7
113
-
127
8
128
-
142
9
143
-
157
10
158
-
172
11
173
-
187
12
188
-
202
13
203
-
217
14
218
-
232
15
233
-
247
16
248
-
255
Random mode
2
000
-
199
Show mode, slow to fast
200
-
209
Reset
210
-
240
Keep fastest speed
241
-
255
Sound mode
This manual suits for next models
1
Other ecoStage Dj Equipment manuals
