ECR 4 Kids ELR-0730 User manual

40mm
35mm
A Easel Frame (1)
Acrylic Sheet (2)
Easel Tray (2)
Wire Basket (1)
Wire Shelf (1)
Easel Clip (4)
Wheel Caster (4)
Parts List
Apron Screw (2)
M
B
C
D
E
F
G
Nut (12)I
Apron Hook (2)
L
Screw (10)H
Plastic Washer (20)K
BEFORE ASSEMBLING, MAKE SURE YOU HAVE ALL THE PARTS
Metal Washer (18)J
2-Station See-Thru Art Easel
with Storage & Drying Racks
Model# ELR-0730
Adult Assembly Required.
Two adults recommended.
- Contains small parts, sharp points and
edges.
- Do not stand, sit, kneel, climb, lean or
pull on unit for support.
- Never leave children unattended.
- Do not place unit near high heat or
moisture.
- Adult supervision recommended.
WARNING:
- Do not allow children to climb on art easel.
- Do not use as a ladder or step.
CAUTION:
San Diego, CA 92110 USA
www.ecr4kids.com
TOOLS NEEDED
Screwdriver
10mm Wrench
14mm Wrench
Batch ID Sticker
located on underside

1Install Casters
3
2Install Wire Basket & Wire Shelf
Unfold the frame until the
side hinges are in the
straight, locked position.
Screw Wheel Casters (L)
into Easel Frame (A).
Tighten using 14mm Wrench.
To ease installation of
wheel casters, lay frame
on side.
Place the Wire Basket (D) & Wire Shelf (E) onto the bottom rungs of the frame.
The Wire Basket & Wire Shelf should rest on the crossbars.

Attach Easel Trays
Attach Easel Trays (C) to the
Easel Frame (A) with a Screw (H),
2 Metal Washers (J), a Plastic
Washer (K) & a Nut (I).
3
Attach the Acrylic Sheets
Carefully remove protective paper from
Acrylic Sheet (B). Attach the Acrylic
Sheets (B) to the Easel Frame (A)
using the 10mm Wrench & the Phillips
Head Screwdriver. Use a Screw (H),
2 Plastic Washers (K), a Metal
Washer (J) & a Nut (I).
Tip #1: Connect the screws
& nuts loosely at first. Once
all screws have been installed
correctly, tighten securely.
Tip #2: For the nuts to function
properly, the plastic ends should
face away from the frame.
Tip #3: Decide where the Apron
Hooks (M) will be positioned and
use the Apron Screws (G) to attach.
Tip #4: Using the wrench,
hold the nut in place while
tightening the screw with a
screwdriver.
Attach Apron Hooks
Attach the Apron Hooks (M)
to the Easel Frame (A) with a
Screw (G), 2Plastic Washers (K),
2 Metal Washers (J) & a Nut (I).

©2011 ECR LLC Version: ELR-0730.2011.03.17
We appreciate your purchase of the 2-Station See-Thru Art Easel
with Storage & Drying Racks. Early Childhood Resources®has made
every effort to supply a quality product, that with proper use and care,
will bring you many years of trouble free use!
“Early Childhood Resources®guarantees the quality of all of our products. You can
trust the quality and safety of our furniture and materials, along with the peace of mind
that our products are made to last. If for any reason, you are not satisfied with the
quality and workmanship of our products, we will replace the item or refund the sale.”
Record the manufacture date here.
Information is located on the Batch ID
sticker and on the shipping carton.
Save this sheet in an accessible place.
Model Number: ELR-0730
Factory Code: F
Manufacture Date:
Batch ID Number:
(Located on Part A)
Part A
If you experience any difficulties with this product, please email us at
[e-mail] or call toll-free at [phone]
(Monday - Friday, 7:00am - 4:00pm Pacific Standard Time)
Please do not return to place of purchase as Early Childhood Resources
will replace defective part(s) and/or product.
4Attach Easel Clips
Care and Cleaning
Clean unit with a soft cloth or sponge using
mild soap and water.
Always clean thoroughly and do not allow
solution to remain on the acrylic for an
extended period of time.
Do not use abrasive, ammonia, or other
harsh chemicals to clean.
If unsure, always test a small area before
applying to the entire acrylic surface.
Do not place near heat, moisture or
vaporizer which may cause easel to warp.
Check for loose or worn parts periodically
and tighten or replace as necessary.
Attach the Easel Clips (F)
to the top edge of the
Acrylic Sheet (B).
The Art Easel is now
ready for use!
Batch ID Sticker
located on underside