Edge Multi-Slot Card Readers User manual

This Product is backed by a Limited Lifetime Warranty.
For complete warranty information visit
www.edgetechcorp.com/register
3700 Ver3(03-05)
6-in-1 Card Reader
(Ver 1.1 & 2.0)
Installation Guide
Installation on Macintosh Systems
We strongly recommend using Mac OS 9 or greater when operating
the EDGETM USB Reader. Computers running
Mac OS versions between 8.6 and 9.0 must first update their OS with
Apple’s USB Adapter Card Support for Mass Storage
devices before using USB devices. Please do not connect the
reader before you turn your machine on!
For Mac OS 8.6/9.X Users
1. Before connection of the USB Reader, turn on the Macintosh and
boot as normal.
2. Insert the driver CD into the CDROM Drive. Double Click the CD
ROM icon and find “UsbCardReader” and launch it.
3. Check the “Standard Installation” option, then click “Install.” Follow
installation instructions to completion.
After the installer completes, please reboot the system.
4. Once the system reboots, connect the 6-in-1 Reader to the
computer with the supplied cable and insert your digital media
card(s).
5. For each card you insert, your computer will show a new drive icon
on your desktop.
6. The digital media card may now be used as a portable storage
device, accessible through standard file access methods.
For Mac OS X Users
1. To utilize the reader under Mac OS X, you must be using version
10.1.2 or greater. You do not need to use the supplied driver CD.
2. Connect the 6-in-1 Reader to the computer with the supplied cable
and insert your digital media card(s). Your computer will automatically
detect the card(s) as you install them.
3. For each card you insert, your computer will show a new drive icon
on your desktop.
4. The digital media card may now be used as a portable storage
device, accessible through standard file access methods.
Prior to removing the digital media card(s) from the reader, click and
drag the new disk icon(s) to the trash folder on your desktop to
disconnect your card(s). Failure to do so may result in data corruption
and render the card(s) unusable.
Installation on a Windows ME or XP Systems
EDGE Digital Media USB 6in1 Readers use ‘Mass Storage Compliant’
technology. This means that users running Windows ME, 2000 or XP
are not required to install any device drivers to operate the reader.
6-in-1 Usage Diagram
Please do not connect the reader before you turn your machine
on!
1. Connect the Reader’s USB plug to the USB port on your PC or
USB Hub.
2. The Operating System should automatically install all needed
drivers without your aid.
3. The 6-in-1 Reader should now show up in “My Computer” as four
additional removable drives, one for each port on the reader.
4. When inserted into the reader, any digital media card(s) may now
be used as a portable storage device, accessible through standard
file access methods.
5. The digital media card may now be used as a portable storage
device, accessible through standard file access methods.
Prior to removing the digital media card from the reader, the card
must be disconnected. Failure to do so may cause data corruption
and render the card unusable.
To disconnect the card, proceed with either of the following steps:
A. Double-click the “My Computer” icon on the desktop. Right-click
on the appropriate removable disk icon and select the
“Eject” option. Wait for the disconnect confirmation prior to
removing the card.
B. Left-click on the PC card with a green arrow in the system tray.
On the pop-up menu, highlight the appropriate card you wish to
remove, then select “Stop USB Mass Storage Device.” Wait for the
disconnect confirmation prior to removing the card.
Installation on PC Compatible running Windows 98, 98 SE, or 2000.
Please do not connect the reader before you turn your machine
on!
1. Insert the supplied Driver CD into your CD ROM Drive.
2. Double click on the “My Computer” icon on your desktop.
3. Double click on the CD ROM drive icon. Once opened, double
click on the “Setup” icon. It will install the software automatically,
then ask you to reboot your computer.
4. Once your machine has rebooted, connect the Reader’s USB plug
to the USB port on your PC or USB Hub.
5. The 6-in-1 Reader should now show up in “My Computer” as 4
additional removable drives, one for each port on the reader.
6. The digital media card may now be used as a portable storage
device, accessible through standard file access methods.
Prior to removing the digital media card from the reader, the card
must be disconnected. Failure to do so may cause data corruption
and render the card unusable.
To disconnect the card, proceed with either of the following steps:
A. Double-click the “My Computer” icon on the desktop. Right-click
on the appropriate removable disk icon and select the “Eject”
option. Wait for the disconnect confirmation prior to removing the
card.
B. Left-click on the PC card with a green arrow in the system tray.
On the pop-up menu, highlight the appropriate card you want to
remove, then select “Stop USB Mass Storage Device.” Wait for the
disconnect confirmation prior to removing the card.
327 East 14th Street / Ada OK 74820 [phone] / [phone] / www.edgetechcorp.com
EDGETM is a trademark of EDGE Tech Corp. Trademarked words or logos used herein are property of their respective owners.
IMPORTANT
PLEASE CONTACT A QUALIFIED TECHNICIAN FOR ASSISTANCE IN INSTALLING THIS PRODUCT IF YOU
ARE NOT FAMILIAR WITH DOING SO. ANY INSTRUCTIONS INCLUDED WITH THE PRODUCT ARE FOR
CONVENIENCE ONLY AND ARE NOT INTENDED TO BE ALL-INCLUSIVE.
NEED
HELP? TECH SUPPORT
www.edgetechcorp.com/support