UniFlow MiCard PLUS-2 V2 User manual

MiCard PLUS-2 V2
Installation Manual

Versioning
Document
Versioning
Version
Date
Author(s)
Reviewer(s)
1.0
23-Dec-2016
Felix Schlick
Holger Bauszus, Thomas Lemmer
1.1
31-May-2017
Thomas
Lemmer
Claudia Kleinekemper
1.2
18-Sep-2017
Thomas
Lemmer
Thomas Lemmer
Document Name
MiCard PLUS-2 V2 - Installation Manual
Knowledgebase
MOMKB-899 (https://web.nt-ware.net/its/browse/MOMKB-899)
File Name
MiCard PLUS-2 V2 - Installation Manual - V1.2.pdf
Technologies
Concerned
MiCard PLUS-2 V2
Short Summary
Installation Manual for the NT-ware MiCard PLUS-2 V2.
Document
Changes
Version
Topic(s)
Changes
1.0
All
Initial version.
1.1
Compatibility (on page 2), Specifications
(on page 4)
Added device support and a note.
1.2
Specifications (on page 4)
Updated cable length.

Disclaimer
NT-ware Systemprogrammierungs-GmbH, all its affiliates, partners and licensors disclaim all warranties,
including, but not limited to, warranties about the accuracy or completeness of statements of this
site's/document's content or the content of any site or external sites for a particular purpose. This
site/document and the materials, information, services, and products at this site/document, including,
without limitation, text, graphics, and links, are provided 'as is' and without warranties of any kind, whether
expressed or implied.
All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic,
electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval
systems - without the prior written permission of NT-ware Systemprogrammierungs-GmbH (hereinafter
also referred to as NT-ware).
Company and product names mentioned herein are registered or unregistered trademarks of their
respective companies. Mention of third-party products is for information purposes only and constitutes
neither an endorsement nor a recommendation. NT-ware assumes no responsibility with regard to the
performance or use of these products. Also, NT-ware makes no claim to these trademarks. Any use of
trademarks, logo, service marks, trade names, and product names is prohibited without the written
permission of the respective owners.
Adlib, Express and Express Server are either registered trademarks or trademarks of Adlib Publishing
Systems Inc.; Adobe®, Adobe® Reader®, Acrobat®, Distiller®, PostScript® and products of the CREATIVE
SUITE(S) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries; Android is a trademark of Google Inc.; Apple®, the Apple® logo, Mac®, Mac
OS®, Macintosh®, iPhone®, iPad® and AirPrint® are trademarks of Apple Inc. registered in the U.S. and other
countries; Box of Box Inc.; Blackboard Transact™ of Blackboard Inc.; CANON, imageRUNNER, imageRUNNER
ADVANCE, MEAP, CPCA, AMS, iW AMS, iW Desktop, iSend, iW SAM are trademarks or registered
trademarks of Canon Inc.; CardSmith® is a trademark of CardSmith LLC; CBORD CS Gold® of the CBORD
Group Inc.; Crystal Reports and other Business Objects products and services mentioned herein as well as
their respective logos are trademarks or registered trademarks of Business Objects Software Ltd. Business
Objects is an SAP company; Dropbox of Dropbox Inc.; eCopy™, eCopy ShareScan® and eCopy ScanStation™
are marks or trademarks of Nuance Communications, Inc.; Evernote® of Evernote Corporation; FileNet® of
IBM Corporation; Foxit®SDK and Foxit® Reader of Foxit Corporation; Google Docs of Google Inc.; Google
Cloud Print™ web printing service is a trademark of Google Inc.; Helix™ Production Workflow is a trademark
of NT-ware Systemprogrammierungs-GmbH; HP, HEWLETT-PACKARD, PCL and LASERJET are registered
trademarks that belong to Hewlett-Packard Development Company; KONICA MINOLTA is a registered
trademark of KONICA MINOLTA Inc.; iOS® of Cisco Technology Inc.; iDRS™ SDK and IRISConnect™ are
unregistered trademarks of I.R.I.S. Group S.A.; JAWS pdf courier™ are trademarks of Global Graphics SA.;
Microsoft®, Windows®, Windows Server®, Internet Explorer®, Internet Information Services, Microsoft®
Word, Microsoft® Excel, Microsoft SharePoint®, Microsoft SharePoint® Online, OneDrive®, One Drive® for
Business, SQL Server®, Active Directory®, Hyper-V® are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries of Microsoft Corporation; Neevia
Document Converter Pro™ of Neevia Technology; NetWare®, Novell®, Novell eDirectory™ of Novell Inc. are
registered/unregistered trademarks of Novell Inc. in the United States and other countries; MobileIron® of
Mobile Iron Inc., Océ, Océ PlotWave®, Océ ColorWave® and PRISMA are trademarks or registered
trademarks of Océ-Technologies B.V. Océ is a Canon company, OpenOffice.org™ of Oracle Corporation;
PAS™ is a trademark of Equitrac Corp.; PosterJet is copyrighted and an internationally registered trademark
of Eisfeld Datentechnik GmbH & Co. KG; RedTitan EscapeE of RedTitan Limited; NETAPHOR®, SiteAudit™ are

trademarks of NETAPHOR SOFTWARE Inc.; SAMSUNG is a trademark of SAMSUNG in the United States or
other countries; Therefore™, Therefore™ Online of Therefore; UNIX® is a registered trademark of The Open
Group; uniFLOW®, uniFLOW Serverless Secure Printing®, Helix Production Workflow®, MIND®,
microMIND®, MiCard® and uniFLOW Service for AirPrint® are registered trademarks of NT-ware
Systemprogrammierungs-GmbH; pcProx®, AIR ID® are registered trademarks of RFIdeas Inc.Readers;
CASI-RUSCO® is a registered trademark of ID Card Group; Radio Key® is a registered trademark of Secura
Key; GProx™ II is an unregistered trademark of Guardall; HID® ProxHID is a registered trademark of HID
Global Corporation; Indala® is a registered trademark of Motorola; ioProx™ is an unregistered trademark of
Kantech; VMware vSphere® and VMware vSphere® Motion® are registered trademarks of VMware; Xerox,
Xerox and Design, as well as Fuji Xerox and Design are registered trademarks or trademarks of Xerox
Corporation in Japan and/or other countries.
All other trademarks, trade names, product names, service marks are property of their respective owners
and are hereby acknowledged.
While every precaution has been taken in the preparation of this document, NT-ware assumes no
responsibility for errors or omissions, or for damages resulting from the use of information contained in this
document or from the use of programs and source code that may accompany it. NT-ware does not assume
any responsibility or liability for any malfunctions or loss of data caused by the combination of at least one
NT-ware product and the used operation system and/or third-party products. In no event shall NT-ware be
liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly
or indirectly by this document.
In addition, this manual provides links to the sites of affiliated or independent companies and certain other
businesses. NT-ware is not responsible for examining or evaluating, and NT-ware does not warrant the
offerings of, any of these businesses or individuals or the content of their websites. NT-ware does not
assume any responsibility or liability for the actions, product, and content of all these and any other third
parties. You should carefully review their privacy statements and other conditions of use.
Monday, November 20, 2017, Bad Iburg (Germany)
Important Note
Serious problems might occur if you modify the registry of your Windows operating system incorrectly.
These problems might require that you reinstall the operating system. We strongly recommend to always
back up the registry of your Windows operating system before applying changes to it, just in case you do
something wrong. NT-ware does not assume any responsibility or liability for any impact on the
operating system after changing the registry. You understand and accept that you use this information
and modify the registry of your Windows operating system at your own risk.
uniFLOW and corresponding components like Web Submission and Internet Gateway rely heavily on
their SQL databases. We strongly suggest that you refrain from modifying these SQL databases manually
without prior consultation from the NT-ware support team. NT-ware does not assume responsibility or
liability for possible impact on your uniFLOW environment after modifying any of the SQL databases.
Copyright and Contact
NT-ware Systemprogrammierungs-GmbH
Niedersachsenstraße 6
49186 Bad Iburg
Germany

www.nt-ware.com
Tel: +49 - 54 03 - 7243 - 0
Fax: +49 - 54 03 - 78 01 03
Email: [email protected]om
Register of Companies: Amtsgericht Osnabrück
No. of entry in Register of Companies: HRB 110944
Chief Executive Officer: Karsten Huster
Responsible according to § 6 MDStV: Karsten Huster
VAT registration no. according to §27 a Umsatzsteuergesetz: DE 230932141
©1998-2017 NT-ware Systemprogrammierungs-GmbH.
Feedback
Should you come across any relevant errors or have any suggestions please contact
[e-mail] or use the Send feedback here button of the uniFLOW Online Help.
Technical Support
First technical support services will be provided by your dealer. Before you contact the dealer for technical
support, ensure you have read this document.

How to use this Document
Text Styles
This style is used for text that is displayed on screen.
This style is used for text the user has to type in.
This style is used for hyperlinks to web pages, internal links to other pages in this manual.
This style is used for code examples: XML code, variables or regular expressions.
Pictograms
Important Note:
Information that is crucial for the correct functioning of the uniFLOW software.
Further Information:
Pointer to additional manuals, installation manuals, white papers or the NT-ware
Knowledgebase.
Region Specific Feature:
Indicator for uniFLOW features that are not available worldwide.
External Link:
Link to an external web page.
Settings:
Detailed explanation of configuration settings or operational procedures.
Compass:
Path to the menu or configuration page in the software.
Screenshots and Diagrams
This manual contains screenshots of the software, diagrams explaining relations and pictures of products.
Even though all visuals are up-to-date at the time of writing, they are subject to change.
Language and Translations
This document has originally been written in English language. Translations of this document are based on
the English original. Some screenshots, diagrams and pictures in this document may not be translated and
appear in English language only.
Send Feedback
Should you come across any relevant errors or have any suggestions please contact
[e-mail] or use the Send feedback here button of the uniFLOW Online Help.

About this Document
This document is delivered as part of the device / the software from NT-ware. Please read this document
before using the device / the software and keep this document or the link to an online version of this
document for future reference. Please make sure that all persons operating the device / the software are
familiar with this document. Please observe all instructions given in this document. Installation,
configuration and maintenance must only be performed by sufficiently qualified personnel. Failure to
comply with this document may void the warranty.
Every effort has been made to ensure that the contents of this manual are accurate. However, NT-ware
reserves the right to make changes without notice.

MiCard PLUS-2 V2 Contents
I
Contents
1Introduction ............................................................................................... 1
2Connection ................................................................................................. 1
3Beep Status ................................................................................................ 1
4LED Status .................................................................................................. 2
5Compatibility.............................................................................................. 2
6Configuration Utility................................................................................... 3
7Specifications ............................................................................................. 4
7.1 Supported Card Types ...................................................................................................5
7.2 Mounting Options.........................................................................................................6
7.3 Compliance and Disposal Notes.....................................................................................7
8Index .......................................................................................................... 9

MiCard PLUS-2 V2
1
1Introduction
The MiCard PLUS-2 V2 is a USB card reader that combines proximity and contactless
technologies into one single reader. MiCard PLUS-2 V2 possesses the capabilities of
reading both 125 kHz proximity cards and 13.56 MHz contactless cards. This reader
eliminates the need for manual entry and provides error-free identification and
security throughout the workplace. The MiCard PLUS-2 V2 allows users to use their
building access card / time tracking card or any 125 kHz or 13.56 MHz tags/labels for
identification in conjunction with Canon MEAP enabled devices (V3.0.8 onwards),
Canon SFP MEAP devices (V1.0.2 onwards), a microMIND V2 (since firmware V2.0.5)
with an attached reader and the uniFLOW Embedded Applet for Hewlett-Packard /
Samsung / Océ Large Format Printers. The plug and play reader comes with flash
memory, allowing the user to quickly configure the output to meet the needs. With its
dual-frequency multi-technology, the MiCard PLUS-2 V2 is highly configurable and can
hold four different ID card configurations (2 are pre-set and 2 are user definable).
The reader can be configured to add characters before or after the card’s data.
2Connection
Connecting the Card Reader
Connect the card reader to the USB 2.0 port at the rear side of the device.
Using the USB port at the front side / user panel might cause the error message:
"An unsupported USB device is connected."
3Beep Status
The MiCard PLUS-2 V2 reader is equipped with a beeper which emits different beep
tones for different statuses. The table below shows the status information given by the
beeper.
Status of the Beeper
Beep Signal
The MiCard PLUS-2 V2 is booting up.
1 x short
A card has been detected.
1 x short

MiCard PLUS-2 V2
2
With the Configuration Utility (on page 3) the beeper volume can be set to one of four
different volumes: off, low, medium and high.
4LED Status
The table below shows the LED status information given by the MiCard PLUS-2 V2.
Status
Green LED
Yellow LED
Red LED
Booting up.
2 x flashing
MiCard PLUS-2 V2 is
ready for operation.
on
MiCard PLUS-2 V2 is not
ready for operation.
flashing
Authentication OK.
on (ca. 2 sec.)
5Compatibility
Canon MEAP devices (V3.0.8 onwards)
Canon SFP MEAP devices (V1.0.2 onwards)
Canon CMFP devices
The MiCard PLUS reader does not work with CMFP devices by default. In order to
make it compatible, the reader requires a certain firmware. Please refer to the
NT‐ware Knowledgebase ‐ MiCard PLUS to CMFP Connection (MOMKB-713
(https://web.nt-ware.net/its/browse/MOMKB-713)) for details. Please note that
registration is required in order to access the NT-ware Knowledgebase.
Canon imageFORMULA ScanFront devices
microMIND V2 (since firmware version 2.0.5)
uniFLOW
uniFLOW Desktop Scan Client (requires uniFLOW 2018 LTS or higher)
uniFLOW Embedded Applet for Hewlett-Packard V1.2 or higher
uniFLOW Embedded Applet for Samsung
uniFLOW Embedded Applet for Océ Large Format Printers

MiCard PLUS-2 V2
3
6Configuration Utility
The MiCard PLUS-2 V2 can be configured with the pcProxConfig tool. Configuration via
uniFLOW Server Configuration > Connections > Agents/Terminals > MiCard is not
possible.
The pcProxConfig tool must be installed on a Windows computer first.
Download the software and manual here:
pcProxConfig (Software and Manual download)
(https://www.rfideas.com/support/product-support/pcprox-plus)
When downloaded, run the pcProxConfig.exe file. The install wizard will guide you
through the installation.
For the configuration, please refer to the provided user manual.

MiCard PLUS-2 V2
4
7Specifications
Model:
MiCard PLUS-2 V2 - RDR-80081AGU-NT2-20
Power Supply:
USB-powered
USB Connector:
USB Type A, pre-wired 50 cm (19.7 ") USB cable
Indicators:
Tri-state LED, dual tone beeper
Transmit Frequency:
125 kHz
13.56 MHz
Maximum Read Range:
2.5 cm to 7.6 cm (1.0" to 3.0")
Dependent upon proximity card type and
environmental conditions.
Dimensions:
1.52 cm x 5.08 cm x 8.57 cm (0.6" x 2" x 3 3/8")
Weight:
113.39 g (4 oz)
Operating Temperature Range:
-30° to 65°C (-22° to 150°F)
Included Items:
MiCard PLUS-2 V2 - RDR-80081AGU-NT2-20
Pre-wired USB cable
Installation manual
Certifications:
CE
FCC
RCM
UL
Cleaning
Clean the device with a slightly dampened cloth that has been well wrung out. Turn off
the power or unplug the device before cleaning.
Never use alcohol, benzene, paint thinner, aerosol sprays or any other highly
flammable substance for cleaning.
Modifications
Changes and/or modifications of the MiCard not approved by NT-ware will make void
the user’s authorization to operate the MiCard.

MiCard PLUS-2 V2
5
7.1 Supported Card Types
125 kHz Supported Cards
oAWID
oCardax UID
oCASI-RUSCO®
oCDVI
oCotag
oDeister UID
oDIGITAG
oDimpna UID
oEM 410x
oEM 4102
oEM 4150
oGProx™ II UID
oGProx™ II ID
oHID® Prox
oHiTag 1
oHiTag 2
oHiTag S
oIDTECK (64 bits)
oIDTECK Alternate (128 bits)
oIndala® (Motorola)
oioProx™ (Kantech)
oIsonas™
oKeri UID
oKeri NXT UID
oNedap
oNexwatch (Honeywell)
oPostech
oPyramid (Farpointe Data)
oRadio Key®
oReadyKey Pro
oRosslare
oRusswin UID
oSecura Key
13,56 MHz Supported Cards
oISO 14443A:
LEGIC Advant CSN
MIFARE® Classic CSN
MIFARE® DESFire® CSN
MIFARE® Ultralight® CSN
MIFARE® Plus® S, X CSN
MIFARE® Pro® X CSN

MiCard PLUS-2 V2
6
MIFARE® Smart MX CSN
Oyster
oISO 14443B:
Cepas
Pico Pass
oISO 15693:
HID iCLASS® CSN
HID iCLASS® SE/SR CSN
HID iCLASS® ID
HID iCLASS® SE/SR ID
HID iCLASS Seos®
ICode CSN
my-d (Infineon)
Tag-It CSN
oISO 18092:
NFC Forum Tag 1 CSN
NFC Forum Tag 2 CSN
NFC Forum Tag 3 CSN
NFC Forum Tag 4 CSN
Sony FeliCa CSN
oOthers:
eTag CSN
Inside Secure CSN
Default Setting
The default setting of the MiCard PLUS-2 V2 supports the following card types:
HID® Prox
HID iCLASS® ID
7.2 Mounting Options
There are different ways of mounting MiCard card readers to the printer, depending
on the device manufacturer and model of the MFD.
Mounting brackets are sold separately and are not included by default with the MiCard
card reader.
For a detailed list of all available mounting options, please refer to the NT-ware Device
Bracket Guide which can be found under Brackets/Mounting on the NT-ware Partner
Site (https://web.nt-ware.net/partner/). Assembly instructions for each mounting
option can be found on the NT-ware Partner Site as well.

MiCard PLUS-2 V2
7
7.3 Compliance and Disposal Notes
FCC Compliance Notes (for USA)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NCC Compliance Note (for Taiwan)
NCC 警語
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使 用者均不得擅
自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時
，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信
或工業、科學及醫療用電波輻射性電機設備之干擾.
Information on Disposal for Users of Waste Electrical & Electronic Equipment
(WEEE)
The WEEE symbol on the product and/or accompanying documents means that used
electrical and electronic equipment should not be mixed with general household
waste. For proper treatment, recovery and recycling, please take this product to

MiCard PLUS-2 V2
8
designated collection points, in accordance with your national legislation and the
Directive 2012/19/EU.
The correct disposal of this product will help save valuable resources and prevent any
potential negative effects on human health and the environment, which could
otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated
collection point.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your
dealer or supplier for further information.
For disposal in countries outside of the European Union
This symbol is only valid in the European Union (EU). If you wish to discard this product
please contact your local authorities or dealer and ask for the correct method of
disposal.