EDIFIER X500 User manual

X500
User's Manual
Multimedia Speaker
Made in China
Edifier Enterprises Canada Inc.

1 Sub Woofer 2 Volume Control
3 Bass Control
5 Power Indicator 6 Speaker Out
7 Power Switch 8 Satellite Speakers
9 User's Manual 10
4 Line In Port
Audio connecting cord
Overview
1
Welcome !
Very thanks for choosing Edifier multimedia speaker,it can
provide good sound for multimedia computer and home theater.
Before operating the system, please read this manual thoroughly
and retain it for future reference.
Overview

Operating
2
Operating
1
2
3 Playing the audio device
CONNECTING
Connect the satellite speakers to the output RCA on the
back panel of the Sub-woofer. Please note to match the color,
red to red and white to white.
Connect the subwoofer to theAudio device.
Using Audio connecting cord , connect the Line-input port
of the subwoofer to Line-out of the Audio Device (Such as the
computer, Discman, etc).
Plug the AC power plug into the wall outlet and turn on the
power switch, Now your speaker system is ready for Use.
Adjusting the volume control and Bass control , then you can
enjoy the music.
Total Power Output : RMS 6W x 2 + 12W(THD=10%)
Input Impedance: 10K Ohm
Input Sensitive: 450 mV
Bass Unit: 7" Aluminum coil, 4 Ohm
M 3" Paper coil, 4 Ohm
Tweeter Unit: 1"
Dimension(Subwoofer): 241(W) x 229(H) x 279(D)mm
Dimension(Satellite): 91(W) x 183(H) x141(D)mm
Gross Weight: About 6.9 Kg
id-range Unit:
PV membrane dome
SPECIFICATIONS
Notice
Edifier assumes noresponsibility for anyerrors that mayappear
in this manual.Information contained hereinis subject tochange
without notice.

Notice
Edifier and Edifier logo are owned by Edifier Enterprises Canada Inc.
and may be registered. And other brand names and trademarks are
the property of their owners.
WARNING
Toreduce the risk of electric shock ,Do not expose this apparatus
to rain or moisture.
Copyright 2005
All Rights Reserved.
Manual Edition 1.1,Jun. 2005
Printed in CHINA