Edimax PS-1210Un User manual

Multi-Language QIG in Driver CD
================================================
Český: Českého průvodce rychlou instalací naleznete na
přiloženém CD s ovladači
Deutsch: Finden Sie bitte das deutsche QIG beiliegend in der
Treiber CD
Español: Incluido en el CD el QIG en Español
Français: Veuillez trouver l’français QIG ci-joint dans le CD
Italiano: Incluso nel CD il QIG in Italiano
Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-
n
Nederlands: De nederlandse QIG treft u aan op de bijgesloten CD
Polski: Skrócona instrukcja instalacji w języku polskim znajduje się
na załączonej płycie CD
Português: Incluído no CD o QIG em Portugues
Русский: Найдите QIG на pусскoмязыке на приложеном CD
Romana: Cd-ul cuprinde Ghid de instalare rapida in limba romana
Slovensky: Anglického sprievodcu rýchlou inštaláciou nájdete na
priloženom CD s ovládačmi.
Türkçe: Ürün ile beraber gelen CD içinde Türkçe HızlıKurulum
Kılavuzu'nu bulabilirsiniz
简体中文: 产品包装 CD 光盘中含有简体中文版快速安装手冊
繁體中文: 產品包裝隨附 CD 中含有繁體中文版快速安裝指南
1

Copyright©by Edimax Technology Co, LTD. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without the prior written permission of this company.
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more detailed information about
this product, please refer to the User's Manual on the CD-ROM. The software
and specifications are subject to change without notice. Please visit our web
site www.edimax.com for the update. All right reserved including all brand and
product names mentioned in this manual are trademarks and/or registered
trademarks of their respective holders.
2

Contents
1 Product Introduction………………………………………………..4
2 Package Contents…………………………………….……………..5
3 Hardware Installation………………………………………………..6
4 Software Installation……………………………………….………..7
4.1. EZMax Installation Wizard………………………...………..7
4.2. Administration Utilities Installation……………..………..8
4.3. Client Utilities Installation………………………….……..15
4.4. Windows Add Printer Procedure………………………..19
4.4.1. Windows Vista/7…………………………………..19
4.4.2. Windows XP………………………………………..23

1. Product Introduction
Thank you for purchasing and using our print server. This print server allows your
printer to become a shared device on the network. It offers printing flexibility and
manageability on your Wired or Wireless Local Area Network with an absolute
minimum setup and maintenance required.
This print server supports TCP/IP, NetBEUI, IPX/SPX, and AppleTalk protocols. It is
the best network printing solutions for various common network operating systems
such as:
Windows 2000/XP/Vista/7
Linux (for LPR Printing only)
MAC OS 9.x above ( for LPR Printing only)
With the help of Installation Wizard, you can easily and instantly complete the settings
for the printing environment, and start enjoying the fantastic features provided by this
print server.
This guide is used for quick installation on Windows peer-to-peer printing
environments. If you have a simple network you can simply follow the procedures
described in this guide step-by-step to complete the installation. If you find any
problem, please refer to the User’s Manual on the CD-ROM for more detail
information.

2. Package Contents
This package contains the following components:
(A) One Print Server
(B) One Antenna (Only for PS-1206UWg & PS-1206PWg & PS-1208UWg
& PS-1210Un & PS-3207UWg)
(C) One Power Adapter
(D) One Quick Installation Guide
(E) One CD (EZmax Wizard / Utility, Multi-language Quick Installation
Guide & User Manual)

3. Hardware Installation
1. Unpack the print server package and verify that all the items listed in the
previous section are provided.
2. Connect the print server to the printer you want to share on the network.
3. Connect the print server to your network by attached the network cable to
the UTP port of the print server.
4. Connect the power adapter to the print server. The print server will
perform the Power-On-Self-Test (POST) after it is powered on. During the
POST, the Status LED will be blinking. When the Status LED is unlighted,
the print server is ready.
Note: You must use the power adapter shipped along with the print
server, do NOT use any other power adapter from other sources.
6

4. Software Installation
4.1.EZMax Installation Wizard
This wizard can be run in Windows 2000/XP/Vista. The following
procedures are operated in Windows XP.
You can install the Print Server by EZMAX Setup Wizard in the CD-ROM
including in the package. The wizard is an easy and quick configuration tool
for internet connection with series process. When you start EZMAX Setup
Wizard, you will get the following welcome screen. Please choose the
language to start the configuration. The wizard will guide you to finish your
network connection. We will not provide any instruction for the EZMAX Setup
Wizard here.
If you lose the CD ROM or you prefer the traditional setup procedure,
please follow the instruction as following step in this quick installation
guide.
** Default login user name & password:
User name: admin
Password: 1234
7

4.2.Administration Utilities Installation
**Please find the utility manually from CD-ROM drive’s root directory or
download it from Edimax webiste. If you have any question please check with
Edimax local technical support team.
The Administrator Installation Program executes a wizard-driven procedure
that performs the following tasks:
zInstall all necessary utilities and drivers in your PC (including the
client utilities).
zPrompt to configure the print server (including the print server name
and IP Address).
zAdd the network port of the print server to your PC.
After the installation, perform the standard “Add Printer” procedure and
choose the print server’s “Network Port” in the “Available Ports” list. Then, you
can test printing function from the Administrator PC.
The Administrator Installation can be performed on Windows
2000/XP/2003/Vista with the same user interface. Before the installation,
please verify that your network protocol is installed on your PC (TCP/IP, IPX
and/or NetBEUI). Note that the following steps are running in Windows XP, for
other Operation Systems the procedures are similar.
1. Please execute the Administrator installation software manually.
8

2. The “Print Server Utilities” window will be displayed. Please Click “Next”.
3. Please Click “Next” to install the utilities in the default folder or click
“Change” to specify the destination folder where you would like to install
the utilities.
9

4. Select the components you want to install. It is highly recommended to
install all provided components. Click “Next” to continue.
5. Click “Install”.
10

6. The system will start to install the utilities automatically.
11

7. You have completed the installation phase and prepare to configure the
Print Server. The “Choose Print Server” will list all Print Servers within the
network. Select the Print Server you would like to configure and click
“Next”.
NOTE 1: If this is the first time you configure the Print Server, the
“Print Server Name” is the last 6-digit of MAC ID with prefix
“PS”. Please check the MAC ID on the print server.
NOTE 2: The list can only display the devices from Edimax.
12

8. Specify a recognizable name for the Print Server and click “Next”.
9. Specify the IP Address for the Print Server manually or click “Next” to
keep default IP Address.
13

10. The configuration summary is displayed in the window. Now, you have
completed the Print Server setup. Click “Finish” and your system will
add network port of the Print Server to your PC automatically.
11. The Administrator Installation procedure is totally completed. Click
“Finish”.
14

4.3.Client Utilities Installation
*Please find the utility manually from CD-ROM drive’s root directory or
download it from Edimax webiste. If you have any question please check with
Edimax local technical support team.
The Client Installation Program is a wizard driven procedure which will perform
the following tasks:
zInstall client utilities and drivers into your PC.
zAutomatically add all Network Ports to your PC.
The network port driver supports network protocol auto-detection. It will
automatically select an available network protocol (TCP/IP, IPX or NetBEUI) of
the client computer to connect to the print server.
Since both the print server side and client side support multi-protocols, the
configuration process of the client side is fully automatic.
After the installation, perform the standard “Add Printer” procedure and
choose the print server’s “Network Port” in the “Available Ports” list. You can
test printing from the PC to the print server as your local printer.
The Client Installation can be performed on Windows 2000/XP/2003/Vista with
the same user interface. Before installation, please confirm that your PC has
already connected to the network and installed at least one network protocol.
Note that the following steps are running in Windows XP, for other Operation
Systems the procedures are similar.
1. Please execute the Client installation software manually.
15

2. The “Print Server Utilities” window will be displayed. Click “Next”.
3. Click “Next” to install the utilities in the default folder or click “Browse” to
specify the destination folder where you would like to install the utilities.
16

4. Click “Install”.
5. The system will start to install the utilities automatically.
17

6. Now, the installation procedure is completed, you are ready to set up the
client’s computer. All network ports of the Print Servers detected on the
network will be added to your PC automatically, click “Continue”.
Note that if there are no print servers detected in the network currently,
please click “Continue” to finish the installation. Please refer to Section
3.5.1 in the manual to add network ports of print servers manually.
7. The Client Installation procedure is completed. Click “Finish”.
18

4.4.Windows Add Printer Procedure
After adding a “Network Port” of the print server to your PC by Administrator or Client
Installation Program, you can follow the procedures described in the following
sections to add printer to the Windows Operation Systems.
4.4.1.Windows Vista / 7
The following “Add Printer” steps are running in Windows Vista / 7.
1 Click “Start”, select “Settings\Printers”.
2 Click “Add a Printer”.
3 The “Add Printer” wizard is displayed. Select “Add a local printer”.