Ednet Power bank User manual

User Manual
POWER BANK
2200mAH

I. Introduction
This product is a lightweight, environmentally friendly, high capacity stylish mobile
power for portable devices anywhere, anytime, which will keep you away from trouble.
This product contains a high-performance lithium-ion batteries, lightweight, safety,
environmental protection. Via the attached cable (Micro USB cable), not only can
power the portable device directly, but also can charge the built-in battery.
It provides adequate back-up energy for the wild expedition, traveling, Adventure,
and travel home.
II. Applies for
1. Be suitable for mobile phone in the market.
2. Be suitable for handheld video games PSP, NDSI, NDSL.
III. Performance
1. Exquisite, fashion design, to charge handheld device at any time
for business people, fashion icon, outdoor hiker and etc.
2. Easily using, no need variety of settings, simply select the
appropriate connector to change.
3. Plug & play, auto-sleep mode function, when no current output,
will sleep automatically.
4. Short-circuit protection, over charge protection, over discharge
protection, intelligent protection of lithium, high conversion efficiency,
leakage protection.
IV. Outside view drawing
Battery indicator
USB Output Interface
Micro USB Input Interface

V. Technical parameters
ITEM SPEC. Features
Capacity 3.7V/2200mAh High-energy green Li-on battery cells
Input Voltage DC 4.75 ~ 5.25V Adaptive intelligent charge management
system voltage
Input Current 800mA Intelligent current input
management system
Rated DC 5.0V±0.25V Adaptive voltage output,
Output Voltage intelligent low-voltage alarm
Output Current 800mA Intelligent load detect and steady current
output management system
Charging time 3 ~ 4 h High charging efficiency
Cycle life ≥300 times (300 cycles)
Size 90x32x23mm Case
Net Weight 70g Product net weight (without accessories)
Accessories USB Cable/Certificate/Manual
VI. How to use it
1. Charger for power bank
The applicable standard cable plug in the computer USB or USB charger, connect to
the Micro USB of mobile power, automatic wake-up charge. During charging,
the battery indicator light cycling; full power indicator light indicates charging completed.
(See Figure 1, Figure 2)
2. Charger for digital products
Using the cable and adapter of the digital products, the electronic switch will be on
automatically, output 5V voltage for use. (See Figure 3)

Connection diagram
Figure 1: Adapter Charging
Figure 2: USB Charging
Figure 3: Charging for Mobile phone
VII. Notice
Ensure the product's safe operation please read the manual carefully before using that:
A. Attention matters
1. Mobile power has built-in lithium-ion battery, do not use metal objects
to short-circuit products, in order to avoid equipment failure
and security risks.
2. Shall not be placed in hot and humid environment.
3. Shall not be demolish or mobile power transformation.
4. The equipment shall meet the specifications required to use DC power,
the use of other power supply may cause fire or malfunction.
5. The heavy impact may cause fire or explosion.
B. Terms of use
1. For the first time or no using for a long time, the mobile power
need 8 to 10 hours to fully charge.
2. Mobile power for temperature -10°C to 45°C degree temperature range.
For best charging results, please use the mobile power
in suitable temperature conditions.
3. When charging and using, this product will be a slight fever,
which is normal, not malfunction.
4. If the products hold for a long time, you need to charge at least
once every three months to maintain its charge properties.
5. Mobile power left unused for a long time will be loss of power,
which's normal self-discharge phenomenon, if ready to use,
please charge again.
6. Keep the mobile power cleaning, please clean it with dry cloth
before using if the port is dirty.