manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Edsyn
  6. •
  7. Industrial Equipment
  8. •
  9. Edsyn FX225 User manual

Edsyn FX225 User manual

FX225 FUME EXTRACTION UNIT
T A B L E O F C O N T E N T S
SETTING UP
OPERATING INSTRUCTIONS
FILTER REPLACEMENT
SYSTEM SPECIFICATION
SETTING UP
1. Detach the FX225 from its packaging.
2. Lift off the filter lid and place gently on the ground.
3. With the filter package exposed remove all protective packaging.
4. Make sure all filters are centered then carefully replace lid.
5. The Unit is supplied with a 6 foot IEC detachable power cord
6. Plug the Unit into a 110/115 Single Phase 60HZ supply.
7. The Unit will take a few seconds to build up to speed on initial start up. This is
quite normal for the design of the Unit.
OPERATING INSTRUCTIONS
1. Push fit the 50mm flexi arms onto the connection on top of the unit.
2. The FX225 is capable of extracting the fume from 2 x 50mm Articulated or Stay
Put Arms.
3. The Unit is designed for continuous running, the suction performance will
deteriorate as the filters become bocked. Change pre-filter (XF2501) when
significant suction loss is noticed. Main Filter (XF2502 or XF2503) will need to
be replaced when chnaging the pre-filter does not restore proper performance.
TO REPLACE FILTERS
Filter Access.
1. Unplug FX225 from main power supply.
2. Lift off Filter lid clear of the filter package and place on a safe surface.
3. Lift out the pre-filter pad which is recessed into the combined filter enclosure.
4. Replace with a new pre-filter.(XF2501)
5. Replace lid and start up Unit.
7. Start up machine and run as normal.
FILTER REPLACEMENT
There are two separate Filters comprising from the base upwards.
(a) Combined Filter - Part Number XF2502
(b) Pre-Filter - Part Number XF2501
It may only be necessary to replace the Pre-Filter.
SYSTEM SPECIFICATION
FX225
Air Flow 120 cfm with filters installed
Size Height: 13"
Depth: 7"
Width: 7"
Weight: 4.4-lbs.
Power Unit:
Type: Radial Ventilator
Rated:
Output 135W
Voltage 110/115V 60HZ Single Phase
Current 3.15A
Start up current 7 x rated current.
Noise Level below 55db
Filter Change Depending on type and quantity of fumes.
Pre-filter Up to 3 months, depending on use.
Combined Filter Every 6-12 months depending on use.

Popular Industrial Equipment manuals by other brands

ABB +Q957 user manual

ABB

ABB +Q957 user manual

G.B.C BASIC EDGE 50 instruction manual

G.B.C

G.B.C BASIC EDGE 50 instruction manual

Tronair Batpak 11-6602-1000 Operation & service manual

Tronair

Tronair Batpak 11-6602-1000 Operation & service manual

Pilz PNOZ mi2p Operation manual

Pilz

Pilz PNOZ mi2p Operation manual

Clemco Zero BNP 6012 manual

Clemco

Clemco Zero BNP 6012 manual

Erskine Attachments V-Plow Operator's manual

Erskine Attachments

Erskine Attachments V-Plow Operator's manual

ABB HT610965 Operation manual

ABB

ABB HT610965 Operation manual

Morra MH 540 user manual

Morra

Morra MH 540 user manual

Eaton S090ST manual

Eaton

Eaton S090ST manual

GRIGGIO G 240 P4 instructions

GRIGGIO

GRIGGIO G 240 P4 instructions

Nexen AIR CHAMP HT45 user manual

Nexen

Nexen AIR CHAMP HT45 user manual

WTE V5 installation manual

WTE

WTE V5 installation manual

ABB HT845232 Operation manual

ABB

ABB HT845232 Operation manual

SMC Networks CJP Series Operation manual

SMC Networks

SMC Networks CJP Series Operation manual

JohnDow Industries JDI-AFT58 Operator's manual

JohnDow Industries

JohnDow Industries JDI-AFT58 Operator's manual

IMB MB9016A instruction manual

IMB

IMB MB9016A instruction manual

Clarke CUMB1 Assembly & operating instructions

Clarke

Clarke CUMB1 Assembly & operating instructions

amiad Arkal Spin Klin 2 user guide

amiad

amiad Arkal Spin Klin 2 user guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.