EefaCo.Store 88 5532 01 User manual

88 5532 01
The Hanover Mobile File
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Tools Required For Assembly : Phillips screwdriver
HARDWARE LISTHARDWARE LISTHARDWARE LIST
Caster
4 pcs.
Wood Screw
for Caster
16 pcs. (+2 extra)
STEP 1
( Figure 1 )
Attach the Caster (4X) underneath unit with wood screws.
(See figure 1)
Turn the unit upside down and place it on the soft cloth.
Assembly Instructions
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
Wood Screw
Caster

Assembly Instructions
Note:
If both drawers are fully loaded and opened at the same time the unit may tip forward.
Do not open both drawers at the same time.
Legal Size
Letter Size
STEP 2
Slide Drawers
into position.
Remove the Pull Handles
that are installed
on the inside of the drawers
and re-install them on
the outside of the drawer.
(See figure 2)
(Figure 2)
STEP 3
Remove the tape holding
the Metal Strips in place.
You can adjust the
Metal Strip for
letter size or legal size
file as shown.
2/2