EFX EFF720 User manual

Professional Haze Machine 1500 (EFF720)
Professional Haze Machine 1500 (EFF720)Professional Haze Machine 1500 (EFF720)
Professional Haze Machine 1500 (EFF720)
• Dimensions: 44cm x 3 .5cm x 25cm
Dimensions: 44cm x 3 .5cm x 25cm Dimensions: 44cm x 3 .5cm x 25cm
Dimensions: 44cm x 3 .5cm x 25cm
• Weight: 13.5 Kg
Weight: 13.5 Kg Weight: 13.5 Kg
Weight: 13.5 Kg
• Voltage: 240volt 50Hz
Voltage: 240volt 50HzVoltage: 240volt 50Hz
Voltage: 240volt 50Hz
• Fuse: 10amp
Fuse: 10ampFuse: 10amp
Fuse: 10amp
• Power Consumption: 1500watts
Power Consumption: 1500wattsPower Consumption: 1500watts
Power Consumption: 1500watts
• Warm up Time: 6 minutes
Warm up Time: 6 minutesWarm up Time: 6 minutes
Warm up Time: 6 minutes
• Tank Capacity: 1. litres
Tank Capacity: 1. litresTank Capacity: 1. litres
Tank Capacity: 1. litres
• Output: 8,000 cubic feet per minute
Output: 8,000 cubic feet per minuteOutput: 8,000 cubic feet per minute
Output: 8,000 cubic feet per minute
• Fluid consumption 4.3ml/ minute
Fluid consumption 4.3ml/ minuteFluid consumption 4.3ml/ minute
Fluid consumption 4.3ml/ minute
• DMX Operated 3 channels
DMX Operated 3 channelsDMX Operated 3 channels
DMX Operated 3 channels
• Simple Operation and repeat Use.
Simple Operation and repeat Use.Simple Operation and repeat Use.
Simple Operation and repeat Use.
To obtain the best performance from your haze machine please
To obtain the best performance from your haze machine please To obtain the best performance from your haze machine please
To obtain the best performance from your haze machine please
read the instructions before use.
read the instructions before use.read the instructions before use.
read the instructions before use.
1. Before use please check the machine to ensure no damage has occurred during transit,
in the event of any damage do not use the product and contact your dealer.
2. This machine is designed to be used in conjunction with haze fluid which is purchased
separately. We recommend using the Visage Haze fluid only as other fluids may invali-
date the warranty.
3. This unit should be cleaned after 40 hours use.
4. When cleaning remove the nozzle first and clean separately with white vinegar. The ma-
chine tank can be cleaned using a mix of 80% water and 20% white vinegar and run the
machine to pass through the solution, when empty switch off the machine. Let the ma-
chine cool down and then replace the nozzle.
EFX (Entertainment FX)
Haze Machine 1500w DMX
Instructions for use
Instructions for useInstructions for use
Instructions for use

1. Mains Inlet
2. Fuse
3. Fluid Storage container
4. isual Display Screen
5. DMX Inlet/Outlets
6. Adjustable Haze outlet
EFX (Entertainment FX)
3.
2.
1.
4.
5.
6.
CONTROL PANEL—ISUAL DISPLAY READING

EFX (Entertainment FX)
OPERATION of Control Panel
1. All operations on the Haze Machine are accessed from the Control panel. There are six con-
trol buttons located below the LCD displa , these will navigate through the various functions.
(refer to the diagram).
2. To navigate the LCD controls use the FUNCTION button to scroll through the various menu
options. Then scroll through the menu options selectable values, use the UP/DOWN buttons.
Press the FUNCTION to save an changes made and return to navigation the menu.
3. Once a DMX signal is received, manual activation is deactivated and the buttons TIMER,
START/STOP and MANUAL ar e locked.
Interval and Duration Settings
Control Panel Menu Structure
INTER AL SET
DURATION SET
DMX512 Add
FLUID SET
0s-200s (seconds) Pause time between timed output
0s-200s (seconds) Duration time of timed operation
1-512 Set the starting DMX address
On
Off
Low fluid shutdown on
Low fluid shutdown off
OLUME SET 1% - 100% Set the volume output
FAN SPEED SET 1% - 100% Set the fan speed
Interval settings control the period of time in between timed haze outlets (seconds), while duration set-
tings are used to control the actual period of time the machine is hazing whilst using the timer mode.
1. Press FUNCTION repeatedl until INTER AL SET or DURATION SET shows on the
displa .
2. Use UP/DOWN to select the number of seconds (0-200)
3. Press the TIMER button to tr our newl configured timer settings.
Timer Mode
1. Press TIMER and the displa will show a countdown of the interval time.
2. When the interval countdown reaches zero (0), the unit will start the duration countdown,
producing haze for the amount of time set in DURATION SET.

EFX (Entertainment FX)
Distributed in the UK by Tel: [phone]
E-mail: [email protected].uk
Warranty
WarrantyWarranty
Warranty
This product carries a 1 year warranty from the date of purchase subject to the following
conditions:
• This warranty is only valid for products used in accordance with the manufacturer’s
Instructions.
• This product must not be modified or changed in any way. Any such modifications will
invalidate this warranty.
• Proof of purchase will be required in order to validate warranty.
• No responsibility or liability is accepted for any direct or consequential damage, loss or
other expense arising from misuse, or incorrect installation or operation of this appliance.
1. Place the machine on a flat surface and in a large area with at least 50cm open space around
the machine.
2. Fill the fluid tank with Haze Fluid as recommended (Visage pro-Haze).
3. Switch on mains power.
4. The LCD displa will show “Warming Up” this will take approximatel 6 minutes.
5. Adjust the Haze output guide to the required setting (six available)
6. When the machine is read for operation the LCD displa will show “Ready Haze” to make
the machine operate ou can simpl press and hold down the MANUAL button on the con-
trol panel.
7. To switch off the machine simpl unplug.
OPERATION of the Machine.
OPERATION of DMX
1. Press FUNCTION repeatedl until DMX512 ADD shows on the displa .
2. Use UP/DOWN to select the starting address 1-512
3. Connect our cables via the DMX inlet to the controller (optional 3pin or 5pin XLR)
4. If the hazer is being used with other DMX equipment then ou can link other units via the
DMX outlets.
Set the Output olume
1. Press FUNCTION repeatedl until OLUME SET shows on the displa
2. Use UP/DOWN to select an output volume percentage (1%-100%)
3. You can now press the START/STOP button to initiate this output.
Set the Fan Speed
1. Press FUNCTION repeatedl until FANSPEED SET shows on the displa
2. Use UP/DOWN select a total speed percentage (1%-100%)