EFX Vertical Fogger 1500 User manual

Vertical Fogger 1500 c/w LED’s (EFF735)
Vertical Fogger 1500 c/w LED’s (EFF735)Vertical Fogger 1500 c/w LED’s (EFF735)
Vertical Fogger 1500 c/w LED’s (EFF735)
• Dimensions: 51cm x 37.5cm x 5cm
Dimensions: 51cm x 37.5cm x 5cm Dimensions: 51cm x 37.5cm x 5cm
Dimensions: 51cm x 37.5cm x 5cm
• Weight: 9.6Kg
Weight: 9.6Kg Weight: 9.6Kg
Weight: 9.6Kg
• Voltage: 40volt 50Hz
Voltage: 40volt 50HzVoltage: 40volt 50Hz
Voltage: 40volt 50Hz
• Power Consumption: 1500watts
Power Consumption: 1500wattsPower Consumption: 1500watts
Power Consumption: 1500watts
• Fog output: 45,000 cubic ft per minute
Fog output: 45,000 cubic ft per minuteFog output: 45,000 cubic ft per minute
Fog output: 45,000 cubic ft per minute
• Light Source 1 x 15watt RGBAW+UV LED’s
Light Source 1 x 15watt RGBAW+UV LED’sLight Source 1 x 15watt RGBAW+UV LED’s
Light Source 1 x 15watt RGBAW+UV LED’s
• Beam angle: 5degree
Beam angle: 5degreeBeam angle: 5degree
Beam angle: 5degree
• Warm up time: 10 minutes
Warm up time: 10 minutesWarm up time: 10 minutes
Warm up time: 10 minutes
• Tank Capacity .5 litre
Tank Capacity .5 litreTank Capacity .5 litre
Tank Capacity .5 litre
• DMX Control
DMX ControlDMX Control
DMX Control–
––
– 10 channels
10 channels10 channels
10 channels
• Control: standalone, IR Remote, Master/Slave mode
Control: standalone, IR Remote, Master/Slave modeControl: standalone, IR Remote, Master/Slave mode
Control: standalone, IR Remote, Master/Slave mode
• Simple Operation and repeat Use.
Simple Operation and repeat Use.Simple Operation and repeat Use.
Simple Operation and repeat Use.
To obtain the best performance from your Vertical Fog Machine
To obtain the best performance from your Vertical Fog Machine To obtain the best performance from your Vertical Fog Machine
To obtain the best performance from your Vertical Fog Machine
please read the instructions before use.
please read the instructions before use.please read the instructions before use.
please read the instructions before use.
1. Before use please check the machine to ensure no damage has occurred during transit,
in the event of any damage do not use the product and contact your dealer.
. This machine is designed to be used in conjunction with Visage Smoke Fluids which are
purchased separately.
3. When using the product the product should be placed on a level flat surface and never
used on an angle.
4. Clean the machine after 40 hours use.
EFX (Entertainment FX)
Vertical Fogger 1500
Instructions for use
Instructions for useInstructions for use
Instructions for use

1. Mains Inlet
2. Mains “On” and “Off” operation
3. DMX Inlet/o tlet XLR 3 pin
4. Remote Control Inp t
5. LCD Display and F nction keys
6. LED’ s for ill mination
7. Smoke o tp t nozzle
8. Smoke Fl id Holder
OPERATION:
1. Fill the smoke machine with Visage Smoke Fluid (8)
2. Connect the machine to the mains (1) and switch on (2) the machine will
take approximately 1 minutes to reach operation temperature.
3. Connect the wired remote control (the Led will illuminate red whilst heat-
ing and turn green when ready for operation).
4. Using the FUNCTION Key (5) you can select from a variety of functions
as shown on the chart, additionally you have UP and DOWN keys which
allow you to navigate the menu.
5. The MANUAL button will allow you to operate the machine by simply
pressing for continual fog and full white on all the LED’s.
6. The VOLUME button when pressed will continually fog and the LED will
run through the pre programmed colour changes. Press the VOLUME but-
ton again to stop.
7. The TIMER button allows the user to set an Interval time which is the time
between fog blasts ( -1 seconds) and the Duration time which is the
time the machine will operate ( -1 seconds)
EFX (Entertainment FX)
1.
2.
3.
4.
5.
6.
7.
8.

EFX (Entertainment FX)
FUNCTION VALUE WHAT IT DOES
DMX512.ADD 1-512 Sets the DMX starting address
Interval Time 1s-1 s Sets the countdown timer between fog blasts in seconds
Duration Time 1s-2 s Sets the duration time of fog blasts for each set interval
time
Colour Mode 1-32 32 Colour Modes
Auto Mode Speed: 1-1 Auto run speed (slow < - - > fast)
Strobe Mode Speed: 1-1 Strobe speed (slow < - - > fast)
LED Dimmer % - 1 % Dimmer
Fade Mode Speed: 1-1 Fade Speed (slow < - - > fast)
FUNCTION
DMX CONTROL
The machine can be controlled via DMX and uses 1 channels.
CH VALUE WHAT IT DOES
1. < - - > 255 Fog Control—On/Off
2. < - - > 255 Red LED Intensity ( < - - > 1 %)
3. < - - > 255 Green LED Intensity ( < - - > 1 %)
4. < - - > 255 Blue LED Intensity ( < - - > 1 %)
5. < - - > 255 Amber LED Intensity ( < - - > 1 %)
6. < - - > 255 White LED Intensity ( < - - > 1 %)
7. < - - > 255 U.V. LED Intensity ( < - - > 1 %)
8. < - - > 255 Strobe (slow < - - > fast)
9. < - - > 255 Auto Mode (no fog) Colour Chase (slow-fast)
1 . < - - > 255 Auto Mode (no fog) Colour Fade (slow-fast)
CH WHAT IT DOES
1Auto– Press to turn on, press again to change speed (1-1 )
2Colour– Press to cycle through its built in static colours
3Fade—Press to turn on + adjust the fade speed (1-1 )
4Interval Fog—Press to turn on/off the interval fog timer
5Strobe—press to start strobe, press again for speed (1-1 )
6Cancel (STOP)
REMOTE CONTROL FEATURE— 6 B tton

EFX (Entertainment FX)
Distrib ted in the UK by
Tel: [phone]
E-mail: [email protected]. k
Web: www.batmink.co. k
Warranty
WarrantyWarranty
Warranty
This product carries a 1 year warranty from the date of purchase subject to the following
conditions:
• This warranty is only valid for products used in accordance with the manufacturer’s
Instructions.
• This product must not be modified or changed in any way. Any such modifications will
invalidate this warranty.
• Proof of purchase will be required in order to validate warranty.
• No responsibility or liability is accepted for any direct or consequential damage, loss or
other expense arising from misuse, or incorrect installation or operation of this appliance.
TROUBLESHOOTING
PROBLEM SOLUTION
Fixture Auto shut off Check the fan in the fixture. It it is stopped or moving slower than normal, the
unit may have shut itself off due to high heat. This is to protect the fixture from
overheating. Clear the fan of obstructions or return the unit for service
Beam is dim
No Light Output
Chase speed too fast/slow
No Power
No response to audio
Fixture not responding/ re-
sponding erratically
Check optical system and clean excessive dust/grime.
Check the fixture is working in the correct mode, eg soundactive/auto/DMX etc
Check to ensure proper set up of speed adjustment
Check fuse, AC cord and circuit for malfunction
Verify that the fixture is in “Sound Active” mode.
Make sure all connections are secured, use high quality DMX cables.
Install a DMX termination plug.
Reset the fixture by switching on and off
CLEANING THE MACHINE
The machine should be regularly cleaned to ensure the best performance is obtained, it
is recommended after 4 hours use.
1. Ensure the machine is disconnected from the mains and dismember the spray noz-
zle on the front of the machine.
2. Empty the fluid tank and refill using a mix of 8 % distilled water and 2 % white
vinegar.
3. Switch on and heat the machine and once ready press the smoke button to run the
water vinegar mixture through the machine to clean.
4. Separately clean the spray nozzle in a white vinegar.
5. Once everything has been cleaned reassemble the machine and it is now ready for
use.