Ego Power+ PH1420 User manual

OPERATOR'S MANUAL
56-VOLT LITHIUM-ION
POWER HEAD
MODEL NUMBER PH1420/PH1420-FC
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
Español p. 57
Français p. 29
16-1017_EGO_PH1400_Power Head_manual_NA_V1
FOR USE WITH EGO POWER+
POWER HEAD ATTACHMENTS

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC2
TABLE OF CONTENTS
Safety Symbols ..........................................4
Safety Instructions.....................................5-10
Introduction ............................................11
Specifications ..........................................11
Packing List ............................................12
Description .........................................13-15
Assembly ...........................................16-20
Operation ...........................................21-23
Maintenance ...........................................24
Troubleshooting .........................................25
Warranty ...........................................26-27

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
OPERATOR'S MANUAL
WARNING: Some dust created by power cutting contains chemicals known to
the state of California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
◾Lead from lead-based paints
◾Crystalline silica from bricks and cement and other masonry products, and
◾Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC4
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident
prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING: The operation of any power tools can result in foreign
objects being thrown into your eyes, which can result in severe eye
damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shield and a full face shield when
needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product. Read,
understand, and follow all instructions on the machine before attempting to assemble
and operate it.
Safety Alert Indicates a potential personal injury hazard.
Read &
Understand
Operator's
Manual
To reduce the risk of injury, user must read and
understand the operator’s manual before using
this product.
Wear eye
protection symbol
Always wear safety goggles or safety glasses
with side shields and a full face shield when
operating this product.
Recycle Symbol
This product uses lithium-ion (Li-ion) batteries.
Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your
local waste authority for information regarding
available recycling and/or disposal options.
Disconnect
battery before
maintenance
Alerts user to disconnect battery before
maintenance.
IPX4 Ingress Protection
Degree Protection from splashing water
V Volt Voltage
mm Millimeter Length or size
cm Centimeter Length or size
in. Inch Length or size
kg Kilogram Weight
lb Pound Weight
Direct Current Type or a characteristic of current

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC6
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool . Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE .
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
Work area safety
◾Keep work area clean and well lit. Cluttered or dark areas invite accidents.
◾Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
◾Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
◾Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
◾Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
◾Do not operate the machine in rain or wet conditions.Water entering the
machine may increase the risk of electric shock or malfunction that could result
in personal injury.
◾Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
◾When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
◾If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 7
Personal safety
◾Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
◾Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries.
◾Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
◾Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
◾Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
◾Dress properly. Do not wear loose clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
◾If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
◾Do not let familiarity gained from frequent use of tools allow you to become
complacent and ignore tool safety principles. A careless action can cause
severe injury within a fraction of a second.
Power tool use and care
◾Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
◾Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
◾Disconnect the plug from the power source and/or remove the battery
pack, if detachable, from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC8
◾Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
◾Maintain power tools and accessories. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may affect
the power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
◾Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
◾Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
◾Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control
of the tool in unexpected situations.
Battery tool use and care
◾Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
◾Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
◾When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
◾Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
◾Do not use a battery pack or tool that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behaviour resulting in fire, explosion
or risk of injury.
◾Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 265°F (130 °C) may cause explosion.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 9
◾Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions. Charging
improperly or at temperatures outside the specified range may damage the
battery and increase the risk of fire.
Service
◾Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
◾Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorized service providers.
◾Use only with the battery packs and chargers listed below:
BATTERY CHARGER
BA1400, BA1400-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2240T, BA2240T-FC, BA2242T, BA2242T-FC,
BA2800T, BA2800T-FC, BA3360T, BA3360T-FC,
BA4200T, BA4200T-FC, BA5600T, BA5600T-FC,
BA6720T, BA6720T-FC
CH2100, CH2100-FC,
CH3200, CH3200-FC,
CH5500, CH5500-FC,
CH2800D, CH2800D-FC,
CH7000, CH7000-FC
◾This 56V power head PH1420/PH1420-FC may be used with only the
following EGO attachments:
ATTACHMENT TYPE MODEL NUMBER
String Trimmer Attachment STA1600/STA1600-FC
Hedge Trimmer Attachment HTA2000/HTA2000-FC
Pole Saw Attachment PSA1000/PSA1000-FC
String Trimmer Attachment STA1500/STA1500-FC
Edger Attachment EA0800/EA0800-FC
Cultivator Attachment CTA9500/CTA9500-FC
Bristle Brush Attachment BBA2100/BBA2100-FC
Rubber Broom Attachment RBA2100/RBA2100-FC
Snow Shovel Attachment SSA1200/SSA1200-FC

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC10
SAVE THESE INSTRUCTIONS!
ADDITIONAL SPECIFIC SAFETY RULES CAN BE FOUND IN THE
APPLICABLE ATTACHMENT’S OPERATOR’S MANUAL

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 11
INTRODUCTION
Congratulations on your selection of the EGO 56-Volt Lithium-ion Power Head. It
has been designed, engineered and manufactured to give you the best possible
dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on the safe assembly, operation and
maintenance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
SPECIFICATIONS
Voltage 56V
Weight 6.2 lb.(2.82 kg)
Recommended Operating Temperature 5°F-104°F(-15°C-40°C)
Recommended Storage Temperature -4°F-158°F(-20°C-70°C)

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC12
PACKING LIST
PART NAME QUANTITY
Power Head 1
Quick-adjust Front Handle 1
Operator's Manual 1
Shoulder Strap 1

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 13
DESCRIPTION
KNOW YOUR POWER HEAD (Fig.1)
The safe use of this product requires an understanding of the information on the tool and
in this operator’s manual, as well as knowledge of the project you are attempting. Before
using this product, familiarize yourself with all operating features and safety rules.
Threshold
Ring
Wing Knob
Coupler
Power-head
Shaft
Shaft-release
Button
Quick-adjust Front
Handle Shoulder-strap
Loop
Speed Indicator
Speed Mode
Switch
Rear Handle
Variable Speed Trigger
Lock-off Lever
Rubber Bumper
Battery-release
Button
Latch
Electric Contacts
Battery Ejector
1
Shoulder strap

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC14
QUICK-ADJUST FRONT HANDLE
Adjusts for ease of operation and to help prevent loss of control.
REAR HANDLE
Ergonomic handle with overmold improves comfort and grip.
LOCK-OFF LEVER
Helps to prevent accidental or unauthorized activation of the trigger. It must be moved
forward before the trigger can be activated.
VARIABLE-SPEED TRIGGER
To turn the tool On and Off and control speed.
SPEED MODE SWITCH
Provides high and low speed mode for different tasks at hand.
COUPLER
Aids in quick connection of the attachment shaft.
SHAFT-RELEASE BUTTON
For releasing the attachment shaft.
WING KNOB
Tightens the coupler and attachment shaft connection.
BATTERY-RELEASE BUTTON
Releases the battery pack from the tool.
LATCH
Secures the battery pack to the tool.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 15
BATTERY EJECTOR
Spring-loaded mechanism that aids in battery removal.
RUBBER BUMPER
Helps to protect the housing from impacts during use.
SHOULDER STRAP
A harness to be worn by the operator for support and balance during cutting operations.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC16
ASSEMBLY
WARNING: If any parts are damaged or missing, do not operate this product
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not
recommended for use with this power head. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possibly serious personal
injury.
WARNING: Always remove the battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when the product is not in use.
UNPACKING
◾This product requires assembly.
◾Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
WARNING: Do not use this product if any parts on the Packing List are already
assembled to your product when you unpack it. Parts on this list are not assembled to
the product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
◾Inspect the tool carefully to make sure that no breakage or damage occurred
during shipping.
◾Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
◾If any parts are damaged or missing, please return the product to the place of
purchase.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 17
INSTALLING A POWER HEAD ATTACHMENT
WARNING: Read and understand entire Operator’s Manual for each optional
attachment used with this power head and follow all warnings and instructions. Failure
to follow all instructions could result in electric shock, fire and/or serious personal
injury.
WARNING: This 56V power head PH1420/PH1420-FC is designed to be used
only with the EGO attachment models that are specified in this Operator’s Manual or
subsequently introduced by EGO for use with this power head. Use of other unauthorized
attachments could cause serious personal injuries or property damage.
WARNING: Some accessories have specific requirements related to safety.
Always pay special attention to such instructions in the manual that accompanies each
accessory.
WARNING: Never install, remove, or adjust any attachment while the power
head is running or with the battery installed. Failure to stop the motor and remove the
battery can cause serious personal injury. NEVER OPERATE THE POWER HEAD WITHOUT
AN ATTACHMENT.
The attachment connects to the power head by means of a coupler device.
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Remove the end cap from the attachment and place it in a safe place for later
use. Align the arrow on the attachment shaft with the arrow on the coupler
(Fig. 2a) and push the attachment shaft into the coupler until you hear a clear
“click” sound. The coupler should be positioned all the way to the RED LINE
labeled on the shaft for the attachment shaft to be properly mounted into place
(Fig. 2b).

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC18
2a
Arrow on the Coupler
Arrow on the Attachment Shaft
Attachment Shaft
Shaft-release Button
Power-head Shaft
Wing Knob
2b
Red Line
Red Line
4. Pull the shaft of the attachment to verify that it is securely locked into the coupler.
If not, rotate the attachment shaft from side to side in the coupler until it snaps
into place.
5. Tighten the wing knob securely.
WARNING: Be certain that the wing knob is fully tightened before operating
equipment; check it periodically for tightness during use to avoid serious personal
injury.
REMOVING THE ATTACHMENT FROM THE POWER HEAD
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Press the shaft-release button and, with the button depressed, pull or twist the
attachment shaft out of the coupler.

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC 19
MOUNTING AND ADJUSTING THE
QUICK-ADJUST FRONT HANDLE
WARNING: Always remove the
battery pack from the product when you
are assembling parts, making adjustments,
cleaning, or when the product is not in use.
1. Stop the motor and remove the
battery pack, if installed.
2. Loosen and remove the quick-
release lever and wing nut from the
front handle (Fig. 3a).
3. Push the front handle onto the shaft
within the mounting zone between
the threshold ring and the coupler
on the power-head shaft (Fig. 3b).
4. Insert the clamping block into the
handle slot (Fig. 3c).
5. Mount the quick-release lever and
tighten the wing nut. Make sure
that the front handle is positioned
upwards and points toward the top
of the rear handle (Fig. 3d).
6. Pull the quick-release lever up to
move/rotate the front handle to a
comfortable operating position
(Fig. 3e).
3a
Quick-release
Lever
Front Handle
Wing Nut
Clamping Block
3b
Front Handle
3d
Wing Nut
Quick-release Lever
3c
Clamping Block
Threshold Ring
Coupler

56-VOLT LITHIUM-ION POWER HEAD — PH1420/PH1420-FC20
NOTICE: The front handle should be
positioned on the shaft only within
the mounting zone, not exceeding the
threshold ring, so that the distance
between the center of the handles is at
least 9-7/8" (250 mm) for safe operation.
(Fig. 3e).
7. Engage the quick-release lever to
secure the front handle in place.
WARNING: Never use the tool
without the front handle securely attached.
MOUNTING THE SHOULDER
STRAP AP1500
Depress the strap carabiner to open it and
attach it onto the shoulder-strap loop
(Fig. 4a).
There are two ways to release the strap.
Take it off from your shoulder directly
(Fig. 4b) or depress the carabiner and
disconnect the shoulder strap from the
shoulder-strap loop (Fig. 4c).
When wearing the strap, no other wearable
should interfere with the release and
removal of the strap.
WARNING: When an emergency
occurs, take it off from your shoulder
immediately, no matter what way the
strap is in.
You should not use the single-shoulder
strap and double-shoulder strap
simultaneously.
4a
4b
4c
3e
Mounting
Zone
≥9-7/8" (250 mm)