Egojin Swing Stepper 7020 User manual

0
SWING STEPPER
DANCING JUMPING TWIST STEPPER

1
Assembly instructions
1.Hook the Cable on the wheel.
OPERATING INSTRUCTIONS
1. Please follow and read the instruction before assembling and using the equipment. Any
other kinds of improper use are strictly prohibited.
2. To operate your stepper, make sure the Cable is connected to the wheel of Base frame.
3. Place and operate your stepper on a flat level and dry surface.
4. This product is designed for adult use only.
5. Keep children and pets away from the exercise area.
6. Use the equipment on a solid, flat level surface with a protective cover for your floor or
carpet. For safety, the equipment should have at least 0.5 metre of free space all around
it.
7. Dress suitable colthing and footwear when using the product. By avoiding get caught
during using, do not wear loose clothing.
8. The time limite of exercise is 10 - 15 minutes each time. Suggest to train at least 3 times
a week.
9. To start an exercise, always make sure if your feet step right on the pedals and nuts and
bolts are securely tightened.
10. The braking system is speed dependent.
11. The equipment is suitable for home use only with the exercise meter of the minimum
accuracy.
1.Hook the Cable
on the wheel.
2.Tighten the adjustment Knob onto the Base
Frame.

2
C
CO OM MP PU UT TE ER R M MA AN NU UA AL L
FUNCTIES
SCAN : Press “mode” key to select “scan”. Then this function will automatically
scans through all the functions displayed on the bottom line of the
monitor.
TIME : Automatically accumulates workout time when starting exercise.
COUNT : Automatically accumulates workout counts when starting exercise.
STRIDES/MIN : Account how many times of average of one Minute ,when you start to
sporty.
CALS : Automatically accumulates calories amount consumed when Starting
exercise.
MODE : To select functions or time, calories,rpm, scan, count. Hold the button for
2 seconds to have a total reset.
.