Eguipex RE-2 User manual

OPERATION MANUAL FOR
SODIR
WARMING CABINETS
MODEL RE-2
765 Westminster Street• Providence, Rhode Island 02903 • U.S.A.
Tel: (401) 273-3300 Fax: (401) 273-3328 e -maiI:equisetum@compuserve.com

Operator's Manual
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all the instructions.
2. Do not touch hot surfaces. Use handles and knobs.
3. To avoid electrical shock, do not immerse the power cord, plug, or connection box in water or other liquid.
4. Close supervision is necessary when any appliance is used or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged
in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause injury.
8Do not use outdoors.
9. Do not allow cord to hang over edge of table or counter, or to touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil.
12. To disconnect, turn any control to "OFF" then remove plug from the wall outlet.
13. Do not use appliance for other than its intended use.
14. SAVE THESE INSTRUCTIONS
Page 2

INTRODUCTION
The SODIR Model RE-2 is a dual service warning cabinet designed to offer quality
reheating and holding of cooked products. The units are constructed of food quality stainless
steel and tinted tempered (safety) glass and feature a top mounted sheathed heating element
and blower fan assembly. The warming cabinet is thermostatically controlled up to 200 F and is
equipped with a 120-minute timer. The unit is furnished with an ON/OFF switch, a rotary switch
and a red indicator light. The warmer comes with a set often wire racks and two removable drip
trays. The unit is also equipped with a fluorescent lamp that is mounted to the top of the warming
chamber.
SPECIFICATIONS
Model Electrical Plug Configuration
RE-2208/240V, 1PH, 2.5KW, 10/12A NEMA-6-15P
INSTALLATION
The SODIR warming cabinet needs to be connected to a grounded outlet of proper voltage
(208/240V, 1PH). DO NOT place the unit in a damp area or near steam sources. The unit is
shipped completely assembled from the factory, however, cleaning is recommended before use.
WARNING: Disconnect (unplug) electrical power supply before cleaning
OPERATION
The easy to use control panel consists of a lighted ON/OFF switch, a red indicator light, a 4-
position ON/OFF rotary switch (controls the heating element and blower fan assembly), a 120-
minute timer, a regulating thermostat (1 to 10 power levels) and a temperature indicator.

With the unit cleaned, simply place the product into the catch pans or place it directly on
the racks. Close the doors, set the ON/OFF switch to ON position, turn the rotary switch to
one of the two ON positions available, turn the thermostat knob to the desired power
position in order to achieve desired temperature (position "8", for instance, corresponds to
approximately 170 F holding temperature) and then set the timer. After cooking is
completed, reverse the procedure to turn the warmer off and unload the product.
Note:Check the temperature indicator on occasion to see if more or less heat is
required.
Note:Also, we recommend keeping the drip trays in the bottom of the warming cabinet
filled slightly with water to help moisten the product and make the clean up easier.
CLEANING
WARNINIG: Disconnect (unplug) electrical power supply before cleaning
CAUTION: Allow the glass doors to cool before cleaning. Do not spray hot glass
with cold liquid
CAUTION: Do not spray heating element/blower fan assembly with any liquid
Cleaning is very important in maintaining a safe and well working rotisserie. Allow the unit
to cool before cleaning. The bottom drip trays, the wire racks and four vertical racks are
removable for cleaning. Upon removing, clean them separately using a damp cloth or
sponge and mild cleaning liquid soap. If needed, use scouring pad on the wire racks. The
exterior and interior of the housing should be cleaned with a cloth dampened lightly with a
soap and water mixture. Use a clean lint-free cloth to remove the excess water or soap.
DO NOT spray the housing with any liquid
DO NOT allow water to drip into the housing around the electrical components
DO NOT wash oven under running water
DO NOT use an abrasive sponge on exterior or interior surfaces
Inspect all parts on a regular basis to ensure that all parts are in good working order. If a
part is damaged, have the unit repaired by an authorized service agency prior to returning
the unit to operation. If you have trouble locating a service agencyin your area, call
EOUIPEX, LCD. at 1-800-649-7885 and ask for customer service.

EQUIPEX, LTD. 14-Sep-00 SPROT-02-03
765 Westminster Street, Providence, Rl 02903
tel:(401)273-3300 fax: (401) 273-3328
Toll free:1-800-649-7885
SODIR Model RE-2 Warming Cabinet(208-240V / 60 / 1 Phase)
Drawing # Part Number Quantity Description Old Part Number
1A01008 1Rotary Switch P-S101008
2A16003 1Terminal Block P-S116003
3A18003 1Halogen Lamp P-S118008
4A02010 1Timer P-S102010
5A06002 1Regulating Thermostat P-S106002
6A18010 1Thermometer P-S118010
7A14078 3Knob, Thermostat P-S114078
8A08008 1Red Pilot light, 220V P-S108015
9A07030 1Switch, On/Off P-S107001
10 B09003 8Magnetic Assembly P-S209003
11 F01034 5Wins Shelf P-S601034
12 H01013 4Glass Door P-S801013
13 A15020/1 4Door Handle P-S115020
14 F08014 2Caster with Brake P-S608014
15 F08013 2Caster without Brake P-S608013
16 H01014 2Side Glass P-S801014
17 OEM0012 1Power Cord (no plug) P-S303007
18 A03006 1Fan Motor, 220V P-S103006
19 D02043RE 1Heating Element, 220V P-S402043

SODIR WARMING CABINET
MODEL RE-2

EQUIPEX LTD., Limited Warranty
Your new Equipex product is warranted to the original purchaser for a period of one year from the date of purchase.
This limited warranty is against defects in material and/or workmanship, and includes labor for replacement of defective parts,
provided repairs are performed by an authorized service agency. The CUSTOMER must inform the Service Agency of the
possibility of warranty coverage and provide a copy of the dated sales or delivery receipt BEFORE WARRANTY REPAIRS
ARE BEGUN. Replacement parts and accessories are warranted for ninety (90) days from the date of purchase when purchased
separately and will be verified by dated sales receipt OR packing slip for that item. All parts or accessories replaced under
warranty must be returned to the Service Agency.
THE FOLLOWING ARE NOT COVERED UNDER WARRANTY:
1. Damage caused by abuse, misuse, dropping, or other similar incidental damage caused by or as result of failure to follow
assembly, operating, cleaning, user maintenance or storage instructions.
2. Labor to replace parts which have become inoperative due to normal use or abuse.
3. Material or labor to renew or repair scratched, stained, chipped, pitted dented or discolored surfaces,
attachements or accessories.
4. Transportation charges to or from an authorized service agency for repair of a machine designated as "CARRY IN
SERVICE" (table top models).
5. Labor charges to install or test attachments or accessories which are replaced for any reason.
6. SHIPPING DAMAGES.Visible and hidden damages are the responsiblity of the freight carrier. The consignee must
file the claim promptly against the carrier, or upon discovery, in case of hidden shipping damages. KEEP ALL
ORIGINAL CONTAINERS AND PACKING MATERIALS FOR CARRIER INSPECTION.
Equipex, Ltd., or any of its affiliates, distributors, officers, directors, agents, employees or insurers will not be obligated for
consequential or other damages, losses, or expenses in connection with or by reason of or the inability to use the machine for
any purpose.
THIS WAJRRANTY IS GIVEN EXPRESSLY AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, FOR MERCHANTABDLITY AND FOR FITNESS TOWARD A PARTICULAR PURPOSE AND
CONSTITUTES THE ONLY WARRANTY MADE BY EQUIPEX, LTD.
Please call your local dealer to arrange for service 11-25-96
765 Westminster Street • Providence, Rhode Island 02903 • U.S.A.
Tel: (401)273-3300 Fax:(401)273-3328
This manual suits for next models
1
Table of contents
Popular Commercial Food Equipment manuals by other brands

Diamond
Diamond AL1TB/H2-R2 Installation, Operating and Maintenance Instruction

Salva
Salva IVERPAN FC-18 User instructions

Allure
Allure Melanger JR6t Operator's manual

saro
saro FKT 935 operating instructions

Hussmann
Hussmann Rear Roll-in Dairy Installation & operation manual

Cornelius
Cornelius IDC PRO 255 Service manual

Moduline
Moduline HSH E Series Service manual

MINERVA OMEGA
MINERVA OMEGA DERBY 270 operating instructions

Diamond
Diamond OPTIMA 700 Installation, use and maintenance instructions

Diamond
Diamond G9/PLCA4 operating instructions

Cuppone
Cuppone BERNINI BRN 280 Installation

Arneg
Arneg Atlanta Direction for Installation and Use